Search results

  1. V

    331 and Vortech S-Trim Vs T5

    I am going to do an 331 stroker on my 95 Cobra w/ Vortech, wondering if I can beef up my trans or should I just buy a new one. Plan on 500-rwhp. any ideas or thoughts welcome. thanks
  2. V

    trunk kits for a 67 coupe

    Anybody seen or used some nice trunk kits ? I have found nothing. Post any info and pic's...thanks
  3. V

    Lowered Mustangs

    Can someone post some pic's of lowered 67-68 mustangs and give brief description of what you did. I want to lower my 67, have 5 leaf mid-eye on the rear and 620's up front. I was going to try a 1" lowering block from Mustang Plus in the rear and have the front springs cut. Any help is...
  4. V

    edelbrock heads

    I have a set of Edelbrock RPM Performer heads on the car. I was wondering what plugs are reccomended for that head. The plugs I have in are Champion RC9YC. Just wondering if this is the correct plug. any help is welcome thanks
  5. V

    turn signal/ gas guage

    Ok ,I need a little help. My turn signals and gas guage stopped working this weekend. However, it started again and then stopped. The hazzard lights work fine. What is going on ? :shrug:
  6. V

    monte carlo brace

    I just got a curved monte carlo brace for the car. However, the strut towers are to far in for the bat to fit. I tried jacking the car up on one and both sides, but still no luck. Any ideas, or am I just out of luck on this ? thanks
  7. V

    NOS on Edelbrock Carb

    Anybody have a pic of the micro switch mounted on an Edelbrock Carb ? I have a superpower shot kit, just trying to figure out mounting the switch, Do I bend it or what ? any help thanks.
  8. V

    voltage regulator

    I changed my regulator on tues. However when I pulled the plug out one wire cam loose. There is a yellow wire I belive it goes on the 3rd lead. Can someone post a pic or take a look at theres and let me know ? The car is a 1967 coupe. thankx
  9. V

    NMRA Ford Nationals-Joliet, IL

    Just wondering if anyone is going this weekend ? :nice:
  10. V

    POR 15

    Has anyone used POR 15 on there doors ? I should be a little more clear. I took off the door panel to be covered. The paint is faded and I really want something that is going to look good. I have used POR on most of the car. Just wondering what people think. Or can you rec. some type of...
  11. V

    Alternator

    What size alternator are most people running on the cars ? Are you going with the one wire or the stock wiring ? I have an old one on the car and it is something like 37-40 amps. I was going to go with a 90 Amp Chrome. Any suggestions ? thanks :spot: :spot:
  12. V

    How do I post Pic's

    Can someone tell me how to post pic's. Tells me my files are to large. What do I need to do thanks :shrug: :shrug:
  13. V

    Alternator Upgrade ?

    I need to upgrade my stock alt. I was thinking about going to a 100Amp chrome one. What is the deal with the one wire alt vs. what is on the car ? Should I go bigger that that ? I am going to be movining the battery to the trunk this weekend. any suggestions are welcome. also, has anyone...
  14. V

    Rear Gears

    What size rear gears are most people using ? I have a 9" with 3.50 and I am thinking about 3.89 or 4.11. Just wondering what others are thinking. thanks
  15. V

    Horsepower to quarter mile times

    How much horsepower are you getting at the rear wheels and what are some of your quarter times. I went to get the car dynoed on Friday and the numbers were lower than what I wanted. However, I keep in mind the weight of the 67 coupe. Just wondering what others have seen. thanks :spot:
  16. V

    Temperatures

    For those that are in 80 or above temps., what size thermostat are you using and what mixture of anti-water ? On a trans temp gauge what is the ideal temp I should be running. thanks
  17. V

    wheel adapters

    I have a set of 16 x 8 Cobra R wheels. Has anyone used the spacers for these wheels or other late model wheels on a 67 mustang ? Did you have to get front and rear or just front spacers ? What thickness do I need for the front and rear. Who has the best price ? I really don't want to pay...
  18. V

    Battery Drain

    What is the best way to locate something that is draining the battery. I recently hooked up my overhead console. I tapped in to the same wire that hooked to the radio for the clock that is always "hot". Was that a Bozo NO NO ? what should volt read ? Any idea's ? I am going to test the...
  19. V

    Brake Light Switch

    I am having problems with getting two brake lights. How can I test the brake light switch ? On the two contact points should there be current ? If so is each contact for each side ? Then do I just go down the line with a test light to find the break or what ? Thanks :shrug:
  20. V

    Brakelight Problems

    Having problems with one brake light. If I cut on the parking lights all is fine, if I step on the brake the second filment does not light. Turn signals work fine. Does this sound like the brake light switch ? Is there a way I can test a new switch without disconnecting the old one ? thanks
Top Bottom
Back
Forums
Menu