Search results

  1. bradranger

    torque converter line up

    I am in the process of installing a used transmission and my hanes manual suggest me to mark the torque converter bolts, which I have on the bad trans but on the used trans there is no marking so what is the purpose of this and what to do if this is a problem? Thanks
  2. bradranger

    Dyno numbers what do u think?

    Just got this done! What do you think?
  3. bradranger

    Ford Fever Classic at MIR Oct. 20-21

    Ford Fever Classic presented by the Washington Area Ford Dealers. Event Description: All Ford Drag Race, Car Show & Swap Meet! This event also features Nostalgia Racecar action, Pro Invitational and Heads-Up 5.0 Mustang Shootout classes. Blue oval fans, this is the event you CANNOT miss...
  4. bradranger

    1.7 rr with twisted wedge heads help?

    Hi, I purchased the twisted wedged heads and a tf stage 1 cam, my question is has anybody ran this setup with 1.7 rr and stock pistons? I know I should clay it but if somebody had problems with this I will have to return for 1.6's thanks:nice:
  5. bradranger

    where to buy fenderwell

    :) Where can I buy a new fenderwell for my 1992 mustang lx besides the junkyard?
  6. bradranger

    Jegs radiator and electric fan

    I thinking of purchasing the jegs radiator 555-51180 for a manual, and I'm not sure if it will make my proform fan clear the crankshaft pulley. They say its 3" thick and 2 row, is this the side tanks they are referring to? or is the whole radiator this thick? thanks :shrug:
  7. bradranger

    radiator question

    I bought a be cool 1 core, 1 row radiator, I need to know is this o.k. for driving around, it says in jegs that it is for drag racing and up to 300 hp. I probaly have 250-260 hp. Just want to make sure because it is quite a bit of work to take the stock out and put this one in. Thanks
  8. bradranger

    Be Cool radiator question

    I just purchased a be cool radiator part# 65011, it is a one core, one row radiator, I'm curious if this was a good choice for a street car with mild track time. Basically I'm asking is this going to be problem as far as cooling efficency? Thanks. Oh, I do have an electric fan if that helps.:SNSign:
  9. bradranger

    Car missing

    I have had this problem for a long time, my car will run fine when first started and will run good for the whole time, but when I cut the car off and restart it, it will start missing. So basically its has something to do when the car gets warm. At wot its fine also. Any suggestions? Could it be...
  10. bradranger

    Electric fan question

    I bought a proform electric fan, and its a nice kit, I installed everything correctly and the box says it can be turned on at 180* and I have tried and my fan is coming on at about 210* can anybody tell me what I'm doing wrong, I got the probe thing about 3-4 inches away from the upper hose! and...
  11. bradranger

    Help, car is stalling on a code 81 !!!

    I just installed underdrive pulleys and an proform electric fan, after I was done I pulled the car out while running and it was fine for about 5-10 mins and it just died. I tried starting and it would struggle to start and would die. I tried so much that it killed my battery, I tried starting...
  12. bradranger

    help with timing cover gasket!

    I'm about to replace my timing cover gasket because it seems to be leaking. I have notice coolant leaking where the cover meets the block on driver side, it leaves a small puddle everytime. I was reading my Haynes book and it says this which I don't understand. "Cut two sections out of a new...
  13. bradranger

    Speed odometer off! Help

    I have a 92 mustang with 3:55 gears. I have the 140 mph speedo, now also I have a 1986 transmission in the car, now my question is how do I get the speed back to normal? Since the transmission in 86' was for an 85 mph speedo would this be a factor in getting the right speedo gear? :flag:
  14. bradranger

    Accel Ignition problem?

    I bought an Accel 300+ ignition from a guy at the track. I got it home and put it on and the car runs a little rough in idle and driving in the 1500-3000 rpm range. The guy told me how to install it. But I do have one question, there is a green wire on the igniton box that isn't being used...
  15. bradranger

    why is my tach sticking?

    I know this is probaly an old question but my tach is now acting wierd. I start the car up and my tach goes to 4000 and stays there. I have a 5" monster tach and its fine. I'm pretty sure its the tach itself in the dash. My question is there anyway of fixing the problem without replacing...
  16. bradranger

    partial throttle problem with check engine light

    :shrug: [FONT=Arial] I was at the track one night when my car all of a sudden popped on the check engine light. Nothing really changed in performance that night. But recently I've have had trouble with the rpm range of 2000-2500 in gear and sitting still in neutral. It does it when its cold...
Top Bottom
Back
Forums
Menu