Search results

  1. P

    95 tuning problems

    OK I'll try to be as brief as possible.. I am running the Anderson Motorsports PMS w/ the Uego 2000 air flow meter. The motor spec's 347 trickflow box R intake Abaco mass air 75mm TB 30lb injectors RHS 200/64 cast heads Comp Cams @.050 lift Intake 224 Exhaust 236 lobe seperation...
  2. P

    torque box

    i was playing around on ebay and noticed a kit to make the torque box upper and lower on the rear stronger.. any body have any experience with one of these kits? and at what point do you really need to beef it up?
  3. P

    Rear upper link bushings???

    I started to replace the stock 4 link arms on my car last night and i was trying to take out the upper rubber bushings on the rear end to replace with urethane bushings... i didn't get to look it over very well last night as it was getting pretty late but how do the old rubber ones come out? do...
  4. P

    What disc brake set up?

    i have a 95 GT convertable and i want to upgrade the front and rear brakes to something larger. what is the best bang for the buck? from what little research i have done it appears that the cobra would be the cheapest but does this increase the stopping power by much over what i have now...
  5. P

    headers glowing red

    first let me give you a little info on my build on my 95. i have a 347 with; cast RHS 200/64 heads i am running around 9.8:1 compression (just running 93 oct pump gas) 70mm tb 80mm mass air calibrated for 30lb injectors 30lb injectors 255lph fuel pump comp cams .555 int lift .570 exh...
  6. P

    BBK SSI intake setup ????

    I am thinking about buying the BBK SSI intake setup for on my 347 motor. anybody tried this intake? what do you know about it? any recomendations on what I should use for an intake set up?
  7. P

    intake setup

    ok, here's what I have. 347cui scat forged steel crank h-beam rods balanced RHS cyclone 200/64 heads Comp cam duration @ .5 lift, intake 224 exhaust 236 10:1 compresion ratio (should be able to run pump gas) AODE trans 2800rpm stall converter 125hp wet zex nitrous kit to install...
Top Bottom
Back
Forums
Menu