Search results

  1. DoctorB712

    Always get shocked after turning off car?

    For 3 days now I always get a shocked (small but annoying) when I get out of my car and touch it anywhere. Door, engine, frame... The only thing I changed was the tweecer install 1 week ago. Still works fine and this is only 3 days old? Any idea? Is a wire touching somewhere? Car...
  2. DoctorB712

    How accurate is the HP/TQ estimate in EA?

    The title says it all.
  3. DoctorB712

    Simple tweecer mod for increase MPG on Highway

    What could I do to increase my MPG on the highway if I am just cruzing along and dont really car about power? I have a long trip soon and I was thinking I have the perfect tool to help me out I just dont know what to change?
  4. DoctorB712

    EEC Analyser MAF tab Question.

    I just loaded up my first datalog from the tweecer into the EEC Analyser. In the MAF tab, I imported my MAF curve that was used during the datalog (ie Stock Cobra) and all the voltages were off. I get like 29 points from 0-1.5 and then a 5 volt point? The software still calculates the NEW...
  5. DoctorB712

    Tweecer + J4J1 file = NO PINGING :)

    I posted a similar message in the tuning forum but I think this is of note to all who have pinging issues. I just got the tweecer and I am now running the J4J1 (ie 94-95 Cobra) instead of the T4M0..... Guess what pinging COMPLETELY gone. Just wanted to share my experience.
  6. DoctorB712

    Tweecer installed and working, J4J1 loaded up :)

    Well after 60 minutes of upside down work (raining outside so door closed!) tweecer is finally in and I should say working perfectly even calcon. I loaded up the J4J1 file and my idle went from up-down-up-down.... to being rock solid at 650-700 :) I dont even have my new MAF sensor yet...
  7. DoctorB712

    Cobra vs GT MAF Sensor and MAF Transfer Curve Question

    I was told a while back that the MAF sensor are the same in the cobra and GT. If so why does the MAF Transfer curve differ slightly between both? Thanks
  8. DoctorB712

    Tweecer RT but no wideband O2= bad?

    Is it bad that I dont have wideband O2s. I just spent all my $$$ on the tweecer RT and my funds are limited for widebands. Basically is it bad to not have the a/f ratio?
  9. DoctorB712

    Tweecer: Why are my fan values negative?

    Why are the fan values negative? Fan high speed -236!!!!
  10. DoctorB712

    What should be my first tweecer mod?

    What should I change first. I would like to start with only one thing (not the fan or egr stuff). Thanks Sig for info on my car
  11. DoctorB712

    Tweecer: What does strategy mean?

    I just insatlled the program and wanted to know what to choose? And what does it mean? How do I know which computer I have? BTW that so called manual they give out sucks big time!!!
  12. DoctorB712

    How hard is it to change the lower control arms?

    Just wanted to know if it's an easy job or should I bring my car in to get it done? I have a week off soon so I will have the time but I never did that before. How does it compare to a upper+lower intake job?
  13. DoctorB712

    Is the tweecer a good investment?

    I dont have a lot of mods on my car. Just wanted to know if the thweecer was a good investment or I should wait until I do motre to my car?
  14. DoctorB712

    How much HP loss from flywheel to RW?

    Just wanted to know how much tye drop is from flywheel HP vs RWHP on a manual tranny? Is there anything to be done to minimize this drop? Thanks
  15. DoctorB712

    What exactly does calibrated for 24# mean?

    I have a question, what does that mean when the MAF sensor says CALIBRATED for 24# injectors? So the car has 24# injectors... the cpu thinks 19#, then you put in this magic MAF that fixes things? What exactly does it TELL the CPU? What are the normal MAF voltages and what changes when you...
  16. DoctorB712

    Could it be as simple as the fan motor?

    Here is a short recap. My temp runs 230 street and 180 highway (that is before and after fluidyne, stewart pump and 180 stat - basically no change). My fan ONLY starts at 230 nothing before. Could my low speed be not working? How do I check that. Also I have put in a new ECT sensor with...
  17. DoctorB712

    What fuel pressure after MAF and injector

    I installed a cobra intake before I put my car in storage last november. At the sam time I changed my injectors to 24 and I put in a PMAS MAF calibrated to 24. Just wanted to know what I should set my fuel pressure to? Also, you set it with vac off right? My pressure is currently 40 vac off.
  18. DoctorB712

    A9L CPU Question?

    Will changing the CPU on our cars for a previous one like A9L change anything? Also what is the difference between our 94-95 and previous ones? Thanks to anyone who answers.
  19. DoctorB712

    Will a 97 Cobra MAF fit a 95?

    Just want to know if a 1997 Cobra MAF will fit on a 1995? Is the electronic different on a 4.6 vs 5.0? Thanks
  20. DoctorB712

    Cobra Intake Installed.

    I just finished installing a cobra intake on my 95. I dont have dyno numbers but I can really feel it above 3000rpm, pulls a lot harder. Well worth the time and money.
Top Bottom
Back
Forums
Menu