Search results

  1. 9

    need help with codes.

    so my buddy just bought a 96 GT, nice looking car, its black with a cobra R hood and clear headlights and corners. anyhow, it blows the front pass. side O2 sensor out of the bung, which is stripped out. we fixed that for now, but it threw like 4 codes. P1506 or P1507 i think, something to do...
  2. 9

    what am i leaving on the table?

    so im going to order a UPR O/R X-pipe. im going to put it on with the stock catback for a few months, and im wondering about a couple things. one of which is how is it going to sound? anyone have a soundclip or know where i can find one? and two, what kinda HP am i leaving out there by not...
  3. 9

    heater circuit malf.

    how can i fix this? i replaced the sensor, but that wasnt the problem. also, im still running lean on both banks even after cleaning the MAF. so i put my stock housing back on and im going to clear the codes. if that doesent work, what should i try? the fuel pump and filter are new. nate
  4. 9

    pulled some codes today

    i got: lean on both banks P0171 and P0174 o2 heater circuit malf. bank 1 sensor 1 P0135 low fuel pressure (cleared yesterday, did not come back today. but now has lean codes) DPFE EGR circuit low imput P1400 so, im thinking i need a fuel pump, o2 sensors, and anyone got any ideas on the...
  5. 9

    where to get splice in MILS?

    i need to get a set of mils and dont want to spend 60 bucks. i saw a site on here that had splice in mils but i cant find it now. can someone help me out. thanks nate
  6. 9

    cam install?

    ok, so i read over the install in one of my mustang mags. they did a set of comp cams and springs. im wondering how hard it is. they said it took 10 hours or something. but i have seen people saying they have done it in 5 hours or less. im thinking about getting the VT stage 1 cams and possibly...
  7. 9

    steeda pullies and T/A.

    i have decided on getting the T/A and pullies over the upper plenum and TB. i have tried to find out how the T/A goes on. it appears to go on the timing chain since it has teeth on it. how hard is the install and what is a good amount of timing to start with and when should i start using 93...
  8. 9

    BFG Comp T/A drag radials CANCELLED!!!

    so i went to order my drag radials at work the other day and the guy at the distribution center said that they no longer make a 275-40-17 Comp T/A DR. it has been switched to the G-force DR. he gave me the part no. for what im hoping is the same size g-force, even though the 275 is not listed in...
  9. 9

    getting some stickys!!

    im going to order them from wal-mart since i work there and i get 20% off. do they make a 245? i was going to get 275's and put them on my stock wheels, but if they make a 245 i will get those. and how well do those things grip, is it enough to make my clutch go. the clutch is strong right now...
  10. 9

    upper plenum/intake/TB questions.

    i have a 98 gt and after christmas i am going to get the mods in the title. for the people with these mods, how did you like them? i also have a PI intake on my car with the adaptor plates. on partshopper MAC has their upper with TB (70mm or 75) and straight shot intake, for 435 bucks i think...
  11. 9

    biggest tire on a stock 98gt wheel?

    what is the biggest tire i can put on my factory 98 gt wheels? i was lookin at 275-40-17 kuhmo MX's. i had them on my old z28 and loved them, but the 285-40-17s are like 20 bucks a tire cheaper. i really like the way the stock wheels look and really want to change them yet, but i need tires...
  12. 9

    strange miss, cant figure it out!

    for a while now my car has been missing out at low rpm and in between quick shifts under WOT at high rpm. i dont have mil elims. but i have an OR H pipe. could that be doing it? from the look of the plugs which i have changed a couple times, using copper plugs. gapped properly. the drivers bank...
  13. 9

    ordered Livernois PI intake kit.

    as i posted earlier my intake manifold on my 98 gt cracked the other day, right about 77k miles. so i ordered the PI kit. i am looking for tips from people that have done the swap with the kit, how did it fit and everything. and how much of a gain did you feel. the site says they have gotten 35...
  14. 9

    intake manifold cracked!

    well, my car rolled 77k last night and i lefted the hood while stopped at a mini-car show last night and smelled coolant. never smelled it until now, and i looked today to find a little puddle of coolant around my thermostat housing and down in the resevior between the cylinder banks. so, where...
  15. 9

    bad MAF?

    the last few weeks my car has been missing alot and i noticed its running pretty rich. it also stutters if i let it idle for more than a minute or so and when im cruising on the highway about about 2300 rpm and push the clutch in the rpm drops for less than 500 and it picks up and dies down a...
  16. 9

    how to make the most of it. please help.

    ok, i got about 200 bucks to spend on my car until christmas. i want to drop my times by about 2-3 tenths. i was thinking about getting steeda pullies and T/A. would that do it? or just doing the PI intake swap kit withouth the adapter plates. i already have o/r H pipe and catback, steeda tri-ax...
  17. 9

    cant stop the missing!!!

    ok my car has 76k miles on it, and i put new plugs and wires. MSD superconductors and autolite platnum plugs. and whenever i let off the gas for more than a few seconds the car starts to miss out and when i hit the gas again it just gets worse. the car feels like its coming off a 2-step. the RPM...
  18. 9

    will they fit?

    hey guys, my little brother bought a set of MT ET drags 28/9/15's. he says they might not fit his car and said for 30 bucks i could buy them. will they fit on a stock susp. 98 GT. i have access to a set of 15 inch v6 wheels to put them on. and do i need to worry about breaking anything, im not...
  19. 9

    98 gt losing power.

    ok, i have a 98 gt with O/R H and flowmaster catback, and 3.90's. my friend has a 94 GT with O/R H and MAC mufflers and underdrive pullies. we raced a few days ago and i got him from a stop and a roll by about 2 cars. we raced again tonight and he actually pulled me from a 3rd gear roll and i...
  20. 9

    99-up gauges in a 98 gt.

    i was working on a 99-up mustang today and i noticed that the interior is pretty close to my 98 gt. i really like the way the gauges look and i was wondering if they work with 98. i know the milage is digital on the 99-up but will the needles work correctly? does anybody know? thanks in advance.
Top Bottom
Back
Forums
Menu