Search results

  1. S

    Car Cuts Out/dies With No Thottle

    I have a 92 306, h/c/I supercharged (belt is off with the same problem) not really sure where to begin. The car will start and idle for about a minute and die when not kept running with the throttle, and when driving under any sort of acceleration it wants to consistently cut out but stays...
  2. S

    ECT wiring

    Can someone show me where the ECT sensor plugs in at, i cant seem to find the pigtail on this dam thing, thanks! 1992 5.0
  3. S

    Port size for ECT? 5.0

    is it a 3/8th sized port for the ECT sensor (right behind the thermo housing) on a 1992 5.0?
  4. S

    Eiabach Drag lanuch springs on a convertible fox?

    ive heard the fronts can make the verts look weird, is this true? anyone have any untouched fronts on a vert? thanks!
  5. S

    youve gotta be kidding me.... bolt in the oil pan

    So last night i was trying to figure out my lifter problem and getting pretty tired i was gonna call it a night, so im gonna take the tray out and go home so im getting the bolt out near the back of the motor and as im doing this in my less than wide awake condition (shouldnt have been ****ign...
  6. S

    Why do my lifters keep cocking sideways?

    brand new cam, new lifters, new comp cams dog bone and spider set. last night i noticed it happening again... (this happened a month ago and ate my cam and some lifters) when the lifters are all the way down in there hole i am able to spin some of them under the dog bones a full 360* they seem...
  7. S

    Ford Hydraulic Lifter Guide Options?

    Do they make anything besides the standard dog and bone lifters for 302 SBF? something aftermarket?
  8. S

    Enough to dip into the 10.xx?

    Hello all ive been building my car for over two years now and was curious as to what your thoughts are on if my car will be able to go into the 10's this year? start off by saying this is a 1992 Convertible LX these are the weight reductions 15x8 Draglites in the rear 15x3 Draglites up front...
  9. S

    How much should my convertible weigh?

    Really interested to see how much your's or take a guess at what mie will weigh this year... its a 92 LX Convertible and im gonna try to list all of the weight reduction mods i can... 15x8 Draglites in the rear 15x3 Draglites up front Aluminum Driveshaft C-4 Transmission Aluminum heads No EGR...
  10. S

    Weird Beeping

    Fired the car last night and i notice when i turned the key over for the fuel pump there was a strange *beep beep beep* that would contine about every 3-5 seconds, ive never heard it before anybody else have any clue what the hell it is?
  11. S

    Picture Request: Supercharged 87-93

    Mainly your accessories, just so i can see everything close up, it is appreciated!! sorry forgot to mention Vortech S-trim!!
  12. S

    Any tips/tricks for doing a oil dipstick on a canton pan?

    This thing is pissing me off, thanks! :rolleyes:
  13. S

    Hey guys check out my new alternator!!

    :p :nice:
  14. S

    Roller Rockers, how much thread is enough?

    I checked my pushrods like everyone said to do so and the best looking one came out to around 6.750, so i order them up blah blah blah and we go to adjust the rockers and the stud only thread down about 2-3 turns before they ran out of room, is that gonna be enough or is my motor gonna let the...
  15. S

    Whats the biggest intanke pump they make?

    For 87-93 mustangs? can you get them bigger than 255?
  16. S

    Little video i made... :)

    http://videos.streetfire.net/video/wm/3D4B569D-262A-496A-800A-ABF12B0F35E9.htm tell me what you think, i dont think im completely done with it, but i had very little footage :( gimme some contructive critisism :)
  17. S

    Will BBK Longtubes work with a C4?

    they only make them for stick cars, but the C4 is pretty small, so my question is will they work with the 157 tooth bellhousing? thanks
  18. S

    How to work a pushrod length checker?

    Im gonna try to give it a shot tonight, any tips on how to use it before i dive in? its the comp cams one, thanks!
  19. S

    Pro Topline Cylinder heads

    Called up a local parts store and he was telling me about these heads, ( i was asking about there high ports) but these are about $100 cheaper, and out flow the high ports. Can anyone tell me about these heads? the specs he gave me are $1200 out the door this weekend (no tax) 2.02/1.60 valves...
  20. S

    TFS High Ports Vrs. Edelbrock RPM heads

    I can get either of these heads locally with a price differance of about $300-$400, i want to know how the edelbrocks compare under boost (roughly 15#'s) to TFS high port heads, i know the high port is a better head, but is the difference worth $400? they both have 2.02/1.90 valves. Running a...
Top Bottom
Back
Forums
Menu