Search results

  1. S

    8.8 carrier question

    ok i snapped an axle last weekend at the track and when i tore it apart i found that i also had a chunk out of one of the small spider gears. i got another whole carrier from a friend and it turned out to be a 31 spline out of an explorer..now i know that the center pin is alot bigger in the 31...
  2. S

    4 cyl t5 bearing retainer??

    does anyone make these in steel? if not where can i get a factory replacement? thanks for any help:nice:
  3. S

    how to "re" break in a motor??

    well i just bought an old maverick drag car that has been sitting for about three years..it will still start real easy and all that but im kinda leary of gettin on it too hard because of how long it sat..what is the best way to bring it back to its old way of life? ive heard maybe changing the...
  4. S

    older 302 cam question

    i have a 78 f150 that im about to put a cam and lifter kit in and a friend of mine has a cam that i am considering..it is 525 lift 292 duration. My question is will this cam work with the other stock components(stockheads,rods,crank,pistons,pushrods etc.)..any info would be appriciated :hail2:
  5. S

    93 cobra roller rockers

    im about to put some 93 cobra roller rockers on a car and i was needing to know if there was anthing special i had to do, as in different pushrods or anything like that..the car will have an e303 cam..thanks for the help
  6. S

    approx. value?

    ..
  7. S

    older 302 ?

    im about to put a cam,4 barrel and headers on my 78 pickup and i was wondering if a set of E7's off a mustang would make it breath a little better and really if they will even work...any other ideas would be appriciated also..thanks
  8. S

    put a price on this

    i am thinking about selling the intake off my car but im not sure of the value..it is a vortech intake with a 1" spacer with the lower ported some..any ideas?:SNSign:
  9. S

    what are these worth?

    i have a set of weld draglite 15x8 wheels with 26x11.50 et street tires that is use at the track..well a friend of mine is wanting to buy them and i dont really know how much to ask..the wheels are in good shape and have center caps and all and the tires still have some life left, you can still...
  10. S

    what transmission

    what tranny is stock in a 93 2.3L stang?a friend of mine bought one for a dd and it has some tranny issues and he isnt sure what tranny it is..thanks for any help
  11. S

    tranny problems

    a friend of mine just bought a 93 stang with a 2.3 and it has some tranny issues.he said it will go into all the forward gears but will not go into reverse.when in the foward gears it doesnt pull very hard though. he also said that it has a leak.any ideas on what could be wrong with it other...
  12. S

    TO bearing question

    so far i have put in three throw out bearings and two transmissions and i cant get the bearing to quit squeaking.i have an adjustable cable but if i adjust it enough to get the bearing to be quiet, the clutch slips real bad..any ideas on what i can do to solve the problem? i am putting in...
  13. S

    starting problem

    i did a battery relocation on my car and it did fine for awhile..the problem i have now is after the car runs for awhile, if i shut it off it wont start again..it starts fine first thing in the morning or if i let it sit for an hour or so..i have since done a 3g alt. upgrage,new battery and new...
  14. S

    tranny swap question

    i do alot of bracket racing so i was thinkin about putting an automatic in my car and taking the five speed out..what i need to know is what all is involved with putting a c4 or c6 in a foxbody? will i have to do anything special with the mount or crossmember or cable..the car had an aod in it...
  15. S

    combo question

    ok my new combo will consist of holley systemax heads,x303 cam,vortech intake,1.6 fms rr's,24lb injectors,75mm mass air,underdrives, and 4.10s..also alot of suspension stuff and a 5 spd...what kind of power should i expect??
  16. S

    vortech question

    i have a chance to buy a vortech supercharger and i was wondering what kind of gains i could expect from this..my block and heads are stock as far as i know, i have a vortech intake,24lb injectors,exuast,65mm TB,75mm mass air,k&n,no air or smog,underdrive pullies, and 4.10s...do you think i...
  17. S

    pcv screen

    ok i have been getting oil up my TB and spacer and i was told that it could be caused by the pcv screen being bad..i took my pcv valve out and there is no screen at all...i have a vortech upper with a ported truck lower..is there any way to "make" a screen. i looked at my old stock lower and it...
  18. S

    oil in upper intake,egr spacer and tb?????

    i am in the process of pulling my upper intake so i can change injectors..when i got the TB off,there was a puddle of oil sitting in the egr spacer and in the neck of the intake.what would cause oil to get up there??i know there was a thread similar to this awhile back but i couldnt find...
  19. S

    plug wire question

    i am about to put a msd 6al box on my car and a tfi blaster coil..i was told that you have to run a certain type of plug wires with a msd.i have ford racing 9mm wires...will they work??if not what kind of wires do i need..its about time to change them again anyways.thanks
  20. S

    injector ?s

    i bought a set of 24lb injectors out of a lt1 camaro and i was told they would work...i just wanted to make sure that i dont have to do anything special when i put them in..i know ford injectors have a pentle cap on the bottom but these dont,does that matter?thanks alot for any help,this is the...
Top Bottom
Back
Forums
Menu