Search results

  1. Bill88Stang

    Fox Eibach Drag Launch Kit Ride Quality

    Has anyone ran the eibach drag launch kit with Lakewood 90/10's and 50/50's? How was the ride quality, I've read some complaints that it's a very hard ride.
  2. Bill88Stang

    Fox Front End Weight?

    Does anyone know roughly the front end weight of a 89 mustang gt? 302 without p/s and battery in the trunk. Car is carbed but I will be putting back ac in it. Stock k member and control arms with 15x3:5 welds in the front and it has cast iron heads. I'm looking at tires for the front and just...
  3. Bill88Stang

    Expired Gt40 Tubular Upper And Lower For 302

    Gt40 tubular upper and lower intake for 302 Throttle bore opened to accept 75mm throttle body. 500 obo shipped. Located in palatka Florida.
  4. Bill88Stang

    Interior Color Change Questions

    Bought a 89 lx hatch roller that has blue interior with 88 grey gt front and rear seats. I would like to change all the blue interior pieces to either the correct 87-89 grey or maybe black. What kind of results have any of you had that used the interior paints and dyes to change interior color...
  5. Bill88Stang

    Fox Gt Wing On Lx Hatch

    What is the easiest way to do this and fill all of the other holes. Kind of hesitant to weld them shut as that metal is rather thing I'm worried about warping the metal.
  6. Bill88Stang

    Engine 1.6 Or 1.7 Roller Rockers And Interior Paint

    Have any of you had any success using the sem or the interior paint from lmr to change interior colors? Just picked up a clean roller that's nice but I can't stand the blue interior. Would love to go grey. I know I'm out of luck for the headliner , carpet and door panels but I'm wondering how it...
  7. Bill88Stang

    Brakes 4cyl To V8 Brakes.

    The roller I just picked up was a original 4 cyl car. Only thing previous owner didn't do was upgrade front brake to the v8 brake still have the 4 cyl brakes up front. What do I need to change and get to get this done
  8. Bill88Stang

    Fox Tires For A 15x 3.5 Drag Lite

    What is the biggest tire I can safely fit on these? I know forever everyone used the 1658015 but I see they are t speed rated and I've driven on that size as a daily driver for years. But just looking for something that could handle the lof of better and a better speed rating that could handle...
  9. Bill88Stang

    Fox Pedestal Mount Roller Rockers?

    Has anyone had experience with the pro form rockers? I know they had a bad rap for quality a while ago is it the same or should I look else where. Not much out there in the 1.6 ratio
  10. Bill88Stang

    Fox E303 Vs F303

    Which would give better fuel mileage during daily driving? Heard a lot of complaints about the e303 giving poor mileage. Just picked up a 89lx hatch Stock bottoms end 302, e303 cam, gt40 3 bar heads milled .030 with trick flow valve springs (stock rocker arms unfortunately) Msd billet dizzy...
  11. Bill88Stang

    Pcv Screen Install

    I want to install a pcv screen under my pcv valve in the gt40 lower on my 94 lighting. Previous owner removed and I would like to install it. Does it fit tightly in the hole like will I have to force it down or will it just fall into place? Seems on the right side .
  12. Bill88Stang

    F303 Or X303 In 351w

    Has anyone run either cam in a naturally aspirated 351w on here? Looking for feedback on either. Thanks
  13. Bill88Stang

    93 Cobra Intake Upper Intake Bolts

    Just picked up a cobra intake from the swap meet yesterday and need where I can find the correct bolt lengths for the upper to lower, I'm running a 1 inch phenolic spacer due to my tall valve covers. Have the bolt kit that comes with the phenolic spacer for the gt40 tubular intake but I notice...
  14. Bill88Stang

    Picking Up New 89 Roller

    After being wrangles for almost 3 years I'm picking up a 89 lx roller from one of my friends and just wanted to go over the set up and get some opinions of what I have to work with. Car has a t5 and 4.10 gears, bbk long tube headers and matching h pipe but also come with Mac Pro chamber as well...
  15. Bill88Stang

    Hp Estimate With Combo

    Just curious what you all would estimate my power out with my combo..10.5:1 351w stock crank and rods, rods bushed for full floating Pistons, arp hardware.heavily ported world Windsor Jr heads 1.94 1.60 valves matched to 1262 intake and 1450 exhaust gaskets. Comp pro magnum 1.6 stud mount roller...
  16. Bill88Stang

    F303 Cam With A 2500 Stall

    Not exactly mustang related but I hope you can help. I'm wondering if a 2500 stall converter would be enough for a f303. It would be in a 94 lighting with a10:1 351 mass add converted running a mustang a9p computer. It currently has a e303 with a 1800 stall and I have the tranny out replacing...
  17. Bill88Stang

    B303 Or E303 With This Combo. No Flames Please

    88 notch stock bottom end 302 in great shape. 3 bar gt40's milled .030. 1.7 roller rockers. gt40 tubular upper and lower 75mm throttle body 24lb injectors, c&l 76mm mass air housing. 255 lph fuel pump. t5 with 3.73's. car currently has e303 but wanted to go to a b303 i had laying around. thanks!
  18. Bill88Stang

    88 Notch Not Charging

    The 88 notch I recently got is not charging, has the stock alternator and I don't have any wiring diagrams for it what wore on the back do I check to see if I have battery voltage to so I know if the alternator is just no good or if it's something else? Also I noticed the dash is pretty much...
  19. Bill88Stang

    Outside Door Handle Broken How Do I Get In

    R/F door does not open from the outside only the inside, seems to have a door lock actuator thats all binded up. drivers door had a broken outside door handle, but if you pullon it just right at the right corner it would open until i went to get in it last night and it all popped off, i can see...
  20. Bill88Stang

    My Combo Estimate

    recenetly picked up this 88 notch that was orignally a 4cyl but the previous owner took everythign from a 92 car to swap over, motor trans rear wiring and computer. just curious of waht everyone thinks of the combo im not expecting muhc would would like a estimate on what it might make. stock...
Top Bottom
Back
Forums
Menu