Search results

  1. fidstang

    Help with Powerdyne 9psi kit

    First off, I had underdrive pullies when I bought the car so when I installed the supercharger I had to use the underdrive water pump pulley. Now I have a over heating problem! Any ways around this? Second problem is I'm only seeing 5psi of boost from a 9psi pulley. Anyone have any idea's as to...
  2. fidstang

    powerdyne install issues

    I posted in the power adder section but no responses so I figured I'd get faster responses here. Powerdyne problems I am currently installing my powerdyne kit and have ran into a few problems. 1- the aluminum discharger tube is too long. 2- I don't have a smog pump so now my alternator has...
  3. fidstang

    Help. ASAP. Code 41

    I have installed my edelbrock RPM heads. Got it up and running with the timing dialed in the pre load set good. It ran great for a week. I ran codes once it was running good and I got KOEO= 85 CM=33 KOER= 42,33 The 85 code I'm waiting on a new silenoid for the EGR. Code 33 is the CNAP, which...
  4. fidstang

    Plug gap for aluminum heads?

    Just wondering what gap everyone is running on their N/A aluminum head applications?
  5. fidstang

    OMG! IDOIT.

    http://videos.streetfire.net/video/d09cd821-6e4c-40dc-a46d-9578f042a005.htm :lol: :lol: :rlaugh: :rlaugh: :bang: :bang: :eek: :rlaugh: :nonono:
  6. fidstang

    Finally a video clip worth watching

    http://media.putfile.com/Flames3465 I seen some fimiliar cars in this one!
  7. fidstang

    Wish it was a civic

    http://videos.streetfire.net/video/96482641-B87F-4CC9-92CA-145EAA9280DD.htm
  8. fidstang

    Traction lock rebuild

    I was wondering if anyone has rebuilt their traction lok with the carbon fiber rebuild kit from the late model cobra's. I keep seeing them on ebay cheap and I need to rebuild mine. Just wondering if it will work sence they're basically the same trak lok. They just have CV joints after the pig...
  9. fidstang

    notching stock pistons

    I am notching my pistons and a thought occured to me. How much material can you remove before the stock forged pieces are prone to breaking or damage? I have removed quite some material for a depth of 0.160". I'm not scared to run them N/A just worried about when I add the 9psi to them.:crazy:
  10. fidstang

    stud mount rocker HELP!!! pretty please

    I am new to stud mount roller rockers. When I install my rockers follow the instructions provided by PRW. I notice that the rocker arms do not seat all the way down onto the studs base. Is this normal? I am used to pedistal, where the rocker arms fulcrum is mounted to the base. Here's a quick...
  11. fidstang

    Notching stock pistons

    I purchased the Isky cams piston notching tool last week. Started the first piston, placed the gasket and head on the block with the tool in intake valve number one. Tapped the tool till it hit the piston and set the collar to the depth I needed the valve to be cut. After removing the head when...
  12. fidstang

    Something you don't see everyday

    http://mustang50magazine.com/featuredvehicles/18759/
  13. fidstang

    Happy fathers day to all who are fathers

    Just wanted to say happy fathers day to all, like myself who are hard working fathers.
  14. fidstang

    Aluminum head spring seats

    I just bought a set of early model Edelbrock RPM's. I was wondering what kind of problem people actually had with them not having a spring cup/locator? The ones I have only have two metal pieces under the springs. I take it that those are the shims. One had been cut through by the inner spring...
  15. fidstang

    Ultra performance Intake Valve, check it out

    I just received my new intake valves. The tech at isky said they should give me an extra 50hp per cylinder.:D Notice the custom cut wave design, an improvement over the swirl polish. Notice the fact that it does not have angles or back cuts, this improves low lift numbers. This is the secert new...
  16. fidstang

    Detriot area Stangers---Down River Cruise

    How many people go to the Down River Cruise near Detriot. http://www.cruisindownriver.com/Default.asp I was there last year. My dad's friend has a car in the pics no.DSC_0244.jpg It has a 302 in it. I am trying to get my stang done in time for it. Either way I will be going. Where's the good...
  17. fidstang

    Just thought someone might get a kick out of this "really cool, use as is race car"

    http://cgi.ebay.com/ebaymotors/1998-98-FORD-BLUE-ZX2-16VALVE-ZETEC-5-SPEED-RACING-CAR_W0QQitemZ4648745358QQihZ002QQcategoryZ6229QQrdZ1QQcmdZViewItem Look at it! Doesn't it make you want to run and sell your stang for it!!!:lol:
  18. fidstang

    all those looking for a notch with extra Eng.

    http://www.autotrader.com/fyc/vdp.jsp?car_id=202453151&dealer_id=49489538&car_year=1990&mod_bookmark_id=null&search_type=used&make=FORD&transmission=&distance=0&model=MUST&address=48911&make2=sel_one&certified=&advanced=y&max_mileage=&max_price=3000&bkms=1150043968625&min_price=1&end_year=1993&co...
  19. fidstang

    Isky notching tool

    Has anyone used the Isky notching tool. What do I need to use one? Does it work with just a drill? It states an arbor but I'm not sure what that is.
  20. fidstang

    That's what I get, GO FIGURE!

    Today I decided to get off my lazy a** and start working on my stang. I needed to pull my tank off and put in my brand new Walbro GSS307 (255lph) pump. Took me two hours just to drop the tank, thanks to a stuborn filler neck. When I was taking out the pump I had noticed that the wires were cut...
Top Bottom
Back
Forums
Menu