Search results

  1. boss_302

    whats the best cam for 89 5.0 carbed motor in a 69 mustang

    whats the best cam for 89 5.0 carbed roller motor in a 69 mustang with 4 speed street car rear gears will probably go for 3:55
  2. boss_302

    edelbrock heads and cam/rockers ?

    I will be building a 5.0 roller motor for my 68 mustang,i have a pair of edelbrock heads for the 5.0 my questions are 1.what type of roller rockers should i use and what ratio. 2. Whats the best cam or highest lift i can go 3.do i need guide plates in the heads The car will have a 5 speed...
  3. boss_302

    302 HO 1994 modular AODE transmission

    .
  4. boss_302

    dodge viper 6 speed trans is 69 mustang ?

    hello all Has anyone fitted dodge viper 6 speed trans is 69 mustang ? i have a chance of one offered to me cheap is there a kit to fit this into an early stang ? thanks javed
  5. boss_302

    T5 cable clutch ? for 69 mustang

    Anyone on here used a cable clutch conversion kit from modern driveline for a 69/70 mustang with a T5 any input you guys can give me.thanks javed
  6. boss_302

    pushrod/piston for bendix booster wanted

    pushrod/piston for bendix booster wanted for 67/70 power brake booster the one that goes in between the master cyl and power booster urgently needed please email [email protected] thanks javed
  7. boss_302

    73 fastback frame dimensions

    hello all Can anyone help im looking for 73 fastback frame dimensions the car was hit on front and is too good to part out it can be saved.Any help would be appreciated.thanks in advance javed
  8. boss_302

    wanted 67/8 project fastback

    wanted 67/8 project fastback please email me at [email protected]
  9. boss_302

    C4 trans conversion help needed

    im converting a car for a friend who wants to go auto the car is a 70 351c 4v with toploader trans.He wants a auto put back in I have located all the bits from another 70 but it has a 351w with c4 will the trans/flexplate/starter etc work from the 351w to 351c.thanks javed
  10. boss_302

    351w exhaust/header issues

    hello all, I have a 351w in my 67 mustang i want to put a 4 speed trans in the car.My ? can i use 351w factory manifolds from a 69/70 mustang in a 67 mustang and use the h-pipe from a69/70 mustang in a 67 car.I dont want to use headers i was sent over 2 sets for the 4 speed coversion both are...
  11. boss_302

    69 deluxe tach dash and under dash harness

    69 tach dash (mach 1 )showing 88k on speedo and underdash harness NOS as new i dont think its even been fitted to car has a small bit chipped of the fuse box due to storage otherwise its like new will take pics tmrw.will ship worldwide.$700 that includes shipping.email [email protected]
  12. boss_302

    foldown seats interchange?

    hello all can anyone tell me if the fold down assy from a 69/70 fastback will fit into a 67 fastback.thanks javed
  13. boss_302

    wanted pair of 69/70 mustang doors

    looking for a pair of nice rustfree doors for 69/70 mustang just need the doors.regards javed email [email protected]
  14. boss_302

    cant get gears toploader

    Hello, just managed to get my car fired up after a lengthy rebuild,67 mustang 4 speed toploader centrforce 2 clutch,hurst shifter.My problem is i cant put it in gear when the engine runs.I have adjusted the linkage to take up slack.Any ideas ? all the clutch stuff is new.Thanks javed
  15. boss_302

    any engine gurus out there?

    Just managed to fire my motor up.Its a 351w with dart cast iron heads,singleplane intake,holley,my ? is about the roller rockers how can i tell if they are for solid or hydraulic cam they are erson 1.6 and are fitted with an inner allen key type lockscrew.All this motor work was done by someone...
  16. boss_302

    gas cap part where to buy?

    hello all im in need of the sealing assembly that seals a pop-open gas cap.The piece that seals the cap to filler neck is missing where can i buy replacement.See pic below,its the whole assy i need the spring/rubber gasket and retainer bolt.he Thanks javed...
  17. boss_302

    custom wheel/tyre help needed

    custom wheel/tyre help needed hello all, im thinking about fitting 2005 up bullitt style wheels on my 67 GT350 clone what would i have to do to make these fit. These are the sizes wheel/tyre combo 17x9" +36mm offset (6.42" backspacing) Lug pattern: 5x4.50" (same as 5x114.3 mm) NITTO...
Top Bottom
Back
Forums
Menu