Search results

  1. 90mustangfan

    Help me pick a muffler, Im tired of dronemasters

    I cant stand driving my car any more with the Terrible drone it makes between 1700rpm and 2200rpm with the Flowmasters I have on there now....I want a muffler that is quiet at cursing, not too loud in general driving conditions, loud and throaty at wot, nice for a daily driver And NO DRONE...any...
  2. 90mustangfan

    Totaled mustangs and Insurance

    For those How have totaled your mustang, Im wondering how much money you got for you cars from the insurance company. I know my mustangs worth 5-6k and it blue books at $1800 in excellent condition. Im not sure how it works when you total your car and how much money the insurance gives you, but...
  3. 90mustangfan

    gt-40p heads and emissions

    Im thinking about getting some GT40p heads with 1.7rr's run it with E cam or tfs1 for cheap upgrade with P style mac headers...If I had the smog tube jB welded to look like its hooked up, Would it pass the sniffer in CA? Im pretty sure the smog tech wouldnt be able to tell the heads have been...
  4. 90mustangfan

    Need advice between struts...

    My front strut is leaking oil, so Im going to replace it. and while Im doing stuts im going to buy shocks also. Its lowered like 1.5-1.75" with eibach springs with no ISO in there so it sits alittle lower than normal. It has subframes, and lower control arms. No sway bar in the front. There is...
  5. 90mustangfan

    not talking race cars...but for street cars..

    not talking race cars...but for street cars..superchargers def. Street car: passes CA emissions and all parts have carb EO#'s. Is daily driven almost daily 10 miles a day. will see track 5 times a year if that. stock H/C. Lots of bolt-ons. After I did a good and long search...about which...
  6. 90mustangfan

    battery relocation...

    is it really worth relocating my battery to the right rear side of the hatch? I see some kits sell for $70-$100....is it worth it? did yo notice after the relocation that the car hooked better or that it cut better 60ft times...Will i notice a difference on the street as far as traction..is it...
  7. 90mustangfan

    anyone have issues with mr. gasket thermostats

    I had a bad hose and I figured while I was replacing my hose, I change the thermostat...I had a 195* stocker in there and It would run at the M. Now I put a 180 mr gasket thermostat and it runs at the first bar above 130..Is this normal?...I had the same therm in another car and it would run at...
  8. 90mustangfan

    which are better flowing heads...

    AFR 165cc cnc'd 1.90/1.6 valves Edelbrock performer 1.90/1.6 valves Trickflow street 2.02/1.6 valves which head flows the best out of the box for a mild emissions legal H/C/i setup? Which of these heads will make the most Hp/tq on a Emissions legal N/A setup on a 302ci, with all other...
  9. 90mustangfan

    after new maf install , new codes...

    I got a c&L 76mm maf for x-mas, Its been on the car already for about a 3-4 days now and Im getting new codes. I didnt have these codes before the install except koeo-79(needs new relay switch) and CM 31(needs new sensor on egr valve) Now for the New codes after I installed the new 76mm...
  10. 90mustangfan

    Got a c&L 76mm maf meter for x-mas...

    I put in on the car yeasterday....wow did it improve throttle response and Idle quality, Im running it with a cai and it idles better than with the stocker. No issues what so ever....It also pulls alittle harder in the top-end and car feel alittle quicker It feel like in pull harder in the upper...
  11. 90mustangfan

    some chaper parts that count...

    What are a few cheap parts around 350 and under, that ill notice some performance gain? With out taking apart the motor....would I notice a gain by adding 1.7 roller rockers? Or would I notice performance with a 75mm MAF? Or a FPR? Im looking for a nice addition to my mods list that will be...
  12. 90mustangfan

    What route would you go?

    with about $3,000-$3500 max spending limit.... Either A. rebuild 302($800), Throw Trickflow top-end kit($2200), finish full bolt-ons for around 3k total and have a full bolt-on h/c/i on fresh 302 with some suspension mods. estimated 290-300rwhp B. leave stock h/c/i 302 w/...
  13. 90mustangfan

    what causes very small slight miss in rpm range at 2k?

    Whether its cold or full temp, I get a small miss/pop out the exhaust at around 1800-2000rpms, its a very small odd pop out the exhaust and the car will studder for a 10th of a sec on that little miss/odd pop in the exhaust and it kinda hesitates... and it doesnt do this all the time but pretty...
  14. 90mustangfan

    all box stock, off the shelf parts...

    It seem for some to get over 300rwhp with full bolt-ons, h/c/i, you need a custom cam, possibly ported aftermarket intake, and not retain emissions, Have Long tube headers, good tune etc... What Rwhp would you get(realistic) with all box stock off the shelf parts. Retaining all emissions legal...
  15. 90mustangfan

    New pics of my car...Before/Afters

    New pics of my car...Before/Afters *Updated* Theres a long story behind this car...It was my first car I got when I was 15, Owned it for 1 year, It was a great first car. I then had to sell it (money problems at that time/no job), I really regretted selling the car. I sold it to a guy I knew...
  16. 90mustangfan

    where to get that shifter handle...

    You know the one with the white ball gripe and then the long chrome handle part, and it comes with a black base piece too, its alot taller than most handles. it looks really clean. I cant find pics so im trying my best to describe it...where do you buy them at?
  17. 90mustangfan

    When cruising, or daily driving...what rpms do you shift at?

    What rpm's do you guys with Gears (3.73 and 4.10, or higher) Shift at when just driving normal or cursing? What do you shift at when just keeping up with the flow of traffic?..Also what rpm do you shift at when trying to conserve on gas Daily driving shift: 2300rpm conserving gas shift:2000rpm...
  18. 90mustangfan

    94-95 MAF...

    is it true that 94-95 Maf housings are 70mm? I was thinking of completing my intake system, and If I can get a 70mm from a 94-95 gt, Autozone sells them for 98 bux -$60 for core. Thats cheaper than the after market, but either 3mm or 6mm smaller...Or I can spend almost double and get a c&l 73mm...
  19. 90mustangfan

    How much do you think it would cost?

    To have a trickflow top-end kit prefessionally installed...I would do It but Have no time, and The fear of all the little things, adj. rockers, making sure all bolts are to proper specs, etc. What would it cost to have installed...Not at ford dealers, but just a mustang place or good mechanic shop.
  20. 90mustangfan

    most possible HP on stock heads...

    what the most RWHP you can get out of a stock stroke, 302-306, with all the bolt-ons on stock heads/Cam, No porting/poshishing, No Nitrous,No Turbo, No superchargers, No Strokers, No short belts, no deleting smog, EGR and it must be streetable and pass smog. (Blot-ons are things like, Intake...
Top Bottom
Back
Forums
Menu