Search results

  1. S

    Att. All Afr Head owners, afr messed up

    I own a pair of Afr 165s and I have had them for about 1 year with 10,000 miles on them with I thought to be no problems. I tore my engine apart today and found that 3 of my valve seals were broken and I thought that mybe to much cam or somthing on my behalf. Well I tore the head off and took...
  2. S

    Sound shuts off intermittently. PLease Help

    I have a 92 mustang with the stock EQ and stock amp with a Alpine head unit. The sound shuts off if you rev the car above 2000rpm or if you use anything electronic in the car. If you hit the break it shuts the sound off, use the head llights, mirrors, anything. The radio will not work with the...
  3. S

    Nitrous plate???

    Iam wanting to add nitrous to my car, and Iam having trouble finding a gt-40 nitrous plate. I have a nitirous bottle, lines and solenoids already I just need a plate. Does anyone know were I can buy one?
  4. S

    how to lower compression for turbo (shims?)

    I need to drop my 306's compression to around 8.8 or lower. Right now, I have 10:1 with AFR 165 heads (58cc), .032" head gasket, and the piston comes up .004" out of the bore. I do not want to change the short block. With that said, is there some way of dropping the compression through...
  5. S

    Custom torque Boxes. What do you think?

    I have a 92 mustang that I ripped the rear torque boxes out of, they were so bad that I almost had to cut the car in half. After talking to many poeple they all told me that It would never hook up right ever again. I bought my car to a guy here in my home town and all he does is suspension. He...
  6. S

    Man I messed up!!! Can it be fixed?

    Well I was out racing my car and realized after a couple of launches, it felt like the ass end of the car was washed out or moving or something. Then I realized that when I get in the throttle even in third gear the driver side tire starts spinning like a big dog. I go home but it on Jacks...
  7. S

    Lower Torque box help!!!

    I noticed that my lower torque boxes are torn. The pass side of the car has tears in it but still connnected but real close to torn all the way throughright by the nut for the a-arm.The driver side one has torn all theway through.The tear on the driver side is right wear the nut is for the lower...
  8. S

    This makes no sense at all. PLease help

    Ok first off this is what I got 1992 mutang gt 306 Afr 165 heads Tubular gt-40 intake Ander son for n-21 cam 30ld fuel injectors 75mm throttle body and egr spacer 75mm mass air calibrated for 30 lb fuel injectors 190 in tank fuel pump anderson for power pipe Ok heres whats going...
  9. S

    Need help with fuel problem

    Need help with new engine running problem I just got my car togeather and I have a problem with somthing but i dont know what. This is what I have 1992 306 Anderson ford N-21 cam Afr 165 heads Tubular gt-40 intake 75mm throttle body, and 75mm mass air 30lb fuel injectors with matching...
  10. S

    need help fast: Roller rockers making noise

    I just got my engine running and only have 10 miles on it? The 1.72 svo pedestal roller rockers are a little loud. I cant hear them unless I get my ear near the valve cover, then its pretty loud. Has any body else had this problem. Is this normal for roller rockers or 5.0? I know that thier...
  11. S

    How do you fix this?

    Ok, I know that every 5.0 is having this problem. I just got my intake and heads ported and polished and I do not want the pcv valve sucking a ton of oil in my ports. So my question is how do you delete or fix the pcv valve so it dont get oil in your in take. I thought of plugging the port on...
  12. S

    Confused?? Head gasket problem

    OK I just bought my Afr 165 heads and need to get a head gasket. I am confused becouse I have a 4.030 bore. Most all the gaskets, the bore sizes are 4.100. Now will this hurt my engine or make the gasket weaker by running the head gasket bore bigger then my engine bore?
  13. S

    Help: How much Lift can you run?????

    I need to know how much clearence I have for a cam. I have a 302 thats bored .30 and the piston comes up out of the bore .004 I am using afr 165s with 1.7 rr. The cam I am looking at the lift is .544 with 1.7 rr. Will this cam clear or is thier a mathmatic way to figure this out without...
  14. S

    What cam to run????

    Need suggestions fast:What cam to run???? OK Iam doing my second engine build and want to do it right, but cant seem to decide on the cam. This is what I am running as of now All forged 306 Afr 165s with spring and valve upgrades tublar gt-40 intake with ported and polished lower 1.7...
  15. S

    Suggestions on what cam

    I have a 92 mustang with these mods All forged 306 AFR 165 heads Ported and ploished gt-40 intake 9.6 compression 30lbs fuel injectors 75mm throttle body and egr 75 mm pro bullet mass air AFM powerpipe 7AL-2 Msd Tremec tko 500 373 gears Also does this sound like a good combo...
Top Bottom
Back
Forums
Menu