Search results

  1. m0l0

    Dissapointed / Ashamed / Happy Mixed feelings

    Hi there :SNSign: Well I am in a not so good mood, we had here a 1/4 mile event which i asisted and it was basically a Camaro/Transam vs. Mustang event. Well there where all kind of cars in the camaro side they where "stock" ones and all bolted on Ls1/Lt1 even one LS1 with a single...
  2. m0l0

    Lets Talk About Injector Offets

    Well I wanted to create a thread about the (in) famous injector offsets vs. battery volts. Its a really wide and open discussion on other forums however I want to gather all the experience on self tuners here, I had my tune pretty much done, but I was not satisfied on the maf curve after all, I...
  3. m0l0

    KB 1.7 KIT Dizzy advance

    KB 1.5 KIT Dizzy advance I have a friend who has a 95 with the KB 1.5 @ 5 psi , he replaced the distributor but he didnt take note on the dizzy timming, so he puts the new one and we backed off the timming all the way to 2 degrees, but he says that the car is now a complete dog i drive it and...
  4. m0l0

    DIYWB Volts Tranfer Table

    Well i am posting this since it was something that helped me to check if there was any drop in the voltage between the LC-1 and the EVP Tweecer reading. Its basicaly a 1-1 table that will show the volts, and NOT the AFR. VOLTS.dbf ( Save As ) I tested this using the warming voltaje output of...
  5. m0l0

    Smeding Performance Engines

    Hi there all :SNSign: Well i have a friend who is changing his complete engine assembly is a 65 but i think i can ask here about them : http://www.smedingperformance.com/ He wants a 347, do you have any word on them , because they dont have any email to make any contact , only a pdf...
  6. m0l0

    Timing Issues

    Hi there! Well i might like to share a little issue i have currently with the tweecer , i am not having any issue controling timing on the WOT, logs show timing as i want, but at idle the timing does not match the spark_base_table , f.e. if i put something like 20, the timing on the...
  7. m0l0

    Wideband Now connected Now what?

    Hi there all :SNSign: Members. Well ive been a little offline in the tuning board. but i am now back with some Q´s. I have succesfully connected the LC-1 Via EVP port to the EEC and tweecer is working fine , i just need some adjustmens on the table because the LC Soft is showing top 10.5...
  8. m0l0

    Stock T4M0 Maf vs Stock J4J1

    Hi there all :SNSign: Well I am back on the tuning bussines fixed the oil leak ( rtv works wonders ) finally ive got the J4J1 cal woking fine ( excellent idle btw much better than t4m0) well how ever everything is woking fine but i compared both cals and ive realized that the cobra cal is...
  9. m0l0

    Idle Settings and some Logs

    Hi there all :SNSign: members! Well ive been out of town the past two weeks finding the driveshaft yoke ( what a pita to find here ) and fixing the T5 that i bought like 3 weeks ago bc there was a prob with it, well now its running really fine no vibrations all quiet (as long as i dont WOT it...
  10. m0l0

    Finaly its ALIVE!! :)

    Well the deadline of the starting was today , and it was a little late but i decided to go on, so after prime the pump it started no hesitation , no nothing everything went so perfect that was hard to believe, the tweecer was pure gold on the first start, idled exactly at 1500 then lowered to...
  11. m0l0

    Finally Ready to turn the engine on

    Hi there all :SNSign: members.. Well finally after a looong engine assembly and everything rechecked like 20 times before doing it i am ready to crank this baby on. However i have a lot of "fear" :lol: to screw things up, i have hooked up the tweecer ( what a nice nice hardware ) and...
  12. m0l0

    H/C/I some little advice

    Hi there all :SNSign: I had almost finished this proyect but i have 2 bugging mind questions 1.- The lifter guide retainer how much tq should it take, i mean the only 2 bolts but i cant find that specification anywhere i guess arround 10-18 ft/lb no more?? 2.- I had read like 300...
  13. m0l0

    Sealant for Head Threads

    Hi there all :SNSign: members! Im again asking questions , well for a quick thread , i couldnt find any other thread sealant than this ones for the head bolts going thought the watter passages. so the question witch one to apply to the bolt threads this one : Permatex 80062 ...
  14. m0l0

    H/C/I smaller cc´s will i need to set it on tweecer?

    Hi there all :SNSign: members! Well the thing is like this: I have completed the modding stage , however as you know the AFR 165 with the 58 cc are smaller than the stock E7´s , so the main thing is , should i change the cid value on the tweecer?? to make the load 100% real , or should i left...
  15. m0l0

    T-5 , Driveshaft Questions

    Greetings all :SNSign: members!! I´m back right now from removing my driveshaft b/c on speeds above 90 mph my trans. vibrates so bad, so i have read and yes i had verify balance on the tires etc etc, but the main issue is the driveshaft , i´ve read the whole T5 reconstruction manual and i...
  16. m0l0

    Questions Questions Arround My Head

    Hi and greetings to all :SNSign: members! I have recently bought the following combo : BBK 75mm TB Cobra Lw/Upper Ported to match Heads AFR 165 studs Hardened Pushrods FR Roller Lifters Crane Cams RR 1.6 Lunati 51014 cam lift int500/ext 510 BBK EQ Lenght Headers Mac O/R X Pipe Mac Catback...
Top Bottom
Back
Forums
Menu