Search results

  1. bdazzgt

    S-197 Seats In My Fox

    I finally got new seats for my fox body, picked up these seats for 100 off Craigslist. They were not bad to put in. I took the stock fox brackets welded a 1/2" spacer on the tracks, made a template of the stock bolt hole placement, transferred to the new seats, drilled holes and bolted them in...
  2. bdazzgt

    will these seats fit my 90gt?

    I found a set of leather 2012 Focus power seats, I could get them pretty cheap. Would these fit in a fox with minimal modifications?
  3. bdazzgt

    I Melted another clutch cable help!

    So in November my adjustable clutch cable of 5 years broke at the plastic piece at the firewall, I bought another cable from LRS put it on no problem then it started binding up at the bellhousing. When I pressed in the clutch it would form a S shape at the bell housing. So I searched the forums...
  4. bdazzgt

    Another Engine Surging thread JRICHKER?

    So I've been battling an idle problem for the last few months. Ive been through the surging idle checklist thread, the problem is the car doesn't surge all the time. It intermittently will surge at a stop light, die....then I restart it and it runs good, it also runs great driving down the road...
  5. bdazzgt

    Can someone photoshop wheels trim for me?

    So today i got a set of pony's with tires for $100. It looks a ton better then 10 holes already. The deal is i wondered what the wheels would look like black with a chrome lip, or all black. i would like to put a black stripe in the trim around the molding also and black out the Mustang GT on...
  6. bdazzgt

    Help me identify this clutch please

    I bought this clutch a few years ago off my cousin, i don't know exactly what stage or model number it is. Can someone help me identify it. thanks Three numbers are on it the pressure plate has -2212ASI and 340294-B those are the only two numbers on it. The actual clutch has TZ1161 on it but...
  7. bdazzgt

    My official repaint thread...

    So, long story short i chipped a very nice chunk of paint off my door down to the primer which required a repaint. When I originally painted the car I was not satisfied with the way it turned out to begin with so i repainted it and wet sanded the piss out of it. here are the end results. I also...
  8. bdazzgt

    So I REpainted the car today

    wel i posted pictures a while back about my progress on the stang. the i later posted a story about my battery blowing up.....well i somehow caught the door on the fender and scraped 6'' or so of paint off my new paint job. Since im super picky i decided to redo my door jams(because that's what...
  9. bdazzgt

    I just want to drive my car, sorry have to vent

    So i posted a little bit back about my alternator overcharging and frying my battery, so i finally get all my new parts ie: battery, alternator, wiring, cables. Yesterday i decide to tear into it. As i get into working on it I see more and more wires are melted. The starter wire was melted...
  10. bdazzgt

    Anyone ever had a battery blow up?

    Well i'm driving home today, my radio suddenly shuts off and car dies. So since its in the middle of church hour traffic on one of the busiest roads in town i get out and push my car out of the intersection. I get it to a parking lot, get out notice that the front is smoking. I open to hood to...
  11. bdazzgt

    My new ride

    Since i live in a small metro area i don't normally have to drive far this was my best stab at gas prices to help keep the cost down, i still drive the stang quite a bit, but sometimes its nice just to putt around town. Its a 2006 Honda metropolitan it goes 40-45mph and gets 98mpg, take that...
  12. bdazzgt

    My car wont heat up on highway

    I installed a new radiator and electric fans because my old one was causing overheating problems, now on the highway the temp wont go over 150-160* until i get back in town then it will heat up to 190 at idle, but as soon as i hit the highway back down it goes. I have a 180* thermostat is this...
  13. bdazzgt

    Car dies when i turn on the a/c

    so recently i had to put a new evaporator in the dash to get the air conditioning to work. Anyways the air works great at highway speeds, but driving through town it idles around 5-600 rpms and if im slowing down it kills the motor i know something should kick the idle up when the ac is turned...
  14. bdazzgt

    Mishimoto radiator/e-fan install thread

    I couldn't really find a good fox body thread about the Mishimoto radiator or electric fans so i figured when i got mine i would do a half-assed attempt on one so here it goes. I bought the entire kit from 50resto, it came with radiator, fans, shroud, attachment hardware, hoses, clamps, and a...
  15. bdazzgt

    What temperature does the electric fan turn on?

    today i installed an electric fan and new aluminum radiator, now i need to know what temp to set the relay on to switch on the electric fans? I got it hooked to the ac for power when the switch is powered on, but i need to adjust the temperature, FYI I have a mishmoto radiator, 180* thermostat...
  16. bdazzgt

    I just painted my car check out the aftermath l

    This is what i started with in 2006, i know the pictures are not good quality bare with me
  17. bdazzgt

    Will this electric fan cool my motor?

    I was digging through my uncles shed and i found this electric fan, i dont know how many cfm's it will pull but i was wondering if it is capable for cooling my motor. the Part number is F8C6-8C607 it looks like its off a mercury tracer/ford escort.
  18. bdazzgt

    Help with my overheating problem, not the typical problem

    hey, well i got my car lined out so i thought, i put a new Trickflow twisted wedge h/c/i new pistons, on the car. I got the idle lined out and the starter fixed so i'm driving the car through all over town it runs around 180-190* and runs great. About 10 minutes of highway driving the temp...
  19. bdazzgt

    what psi do you set your fuel pressure to?

    i just put an adjustable fuel pressure regulator on the stang, the paper said stock psi was 44 so i set mine to 48 is this too much pressure? the car seems to run better and idles a whole lot better.i just want to make sure im not going to run pig rich and stuff? thanks guys
  20. bdazzgt

    Why do I keep going through starters?

    well last friday the 29th i put starter number 5 on my car, i do admit they are the new orielly's starters for the car but it seems that i constantly have to replace them, last time i broke down and bought a heat shield this starter lasted until yesterday. They start to drag slowly then wont...
Top Bottom
Back
Forums
Menu