Search results

  1. B

    engine management system

    anyone running engine management system in 5.0 with trickflow stage 2 cam and track heat intake? n/a motor Crane cams told me stage 2 cam is too big for eec-iv computer and needs engine management? Currently running stage 1 with street intake, looking to put stage 2 cam in with track heat...
  2. B

    Stage 2 trickflow cam

    I have a 91 Mustang 302 bored out to .030 (306) The rest of the block is stock except for the new probe pistons. It has the trickflow heads, stage 1 cam with the street intake. 24lb injectors, 73 mass air (C&L) 70 mm accufab tb, BBK cold air kit, 5 speed, eec-iv computer. N/A. Had a Programable...
  3. B

    Need Help ! Trick flow top end kit problems

    Trick Flow Top End Kit Don't be in such a rush to change that C&L mass air flow meter. Sounds like your injectors are too big for that application. I have a 91 Stang 5 speed with the Trick Flow Street kit. 24lb injectors and 4:10 gears. Car ran a 13.02 @ 105.80 last week at Island Dragway in...
  4. B

    Rear sway bar clearance with trick flow girdle cover

    Will the rear sway bar on a 1991 mustang fit with a trick flow girdle cover? Someone told me that it will hit the cover? Anyone using superior evolution axles for 28 splines?
  5. B

    New Fan time !?!?

    I put the flex fan on my 91 5.0. With the stock clutch fan car would run around 200-210. now car runs 190-195. FOR $60.00 with spacer was a good investment. Fan is not noisy. car has aluminum trick flow heads and the fan keeps that temp down. Good choice!!
  6. B

    Fox Ball Joints

    Ball Joints repalced I just pressed the lower ball joints out of my 91 Stang on both sides with no problem. NAPA sells replacement ball joints. Of course they would rather sell you the whole lower control arm!! If the arms are in good shape along with the bushings, just change the ball joints.I...
  7. B

    Idle Problems

    yes, i checked the throttle cable to make sure that is not the problem. you can raise the rpms to 2000 and it will hang there also then drop.
  8. B

    Idle Problems

    When slowing to a stop, idle hangs then returns to normal.
  9. B

    Idle Problems

    I have a 91 Mustang Gt 5.0 that I just rebuilt. The block is bore out to 4.030 over (306). New probe 10:1 pistons , crank balanced and polished. Top end is Trick Flow street with aluminum heads and the stage 1 camshaft. Accufab 70 mm t/b with C&L 73 mm MAF. Holley afpr set to 40lbs with vacumn...
  10. B

    BRAKE LIGHT SWITCH

    CHECK TO MAKE SURE YOU HAVE POWER AT THE SWITCH. check your connections around the steering column.maybe a bad connection also. BLK3DGT:SNSign:
  11. B

    H/C/I & AOD to T-5 CONVERSION COMPLETE!!

    PICTURES COMING SOON. I'll post pictures shortly. have plenty of them!!!
  12. B

    H/C/I & AOD to T-5 CONVERSION COMPLETE!!

    My winter project is finally complete after 3 months. 1991 5.0 bored out 4.030new trick flow (probe) pistons, 10.0:1 compression. Engine balanced and crank polished. New cam bearing, rings, bearings. Trick Flow Top-End Kit TFS-K514-360-350. Ford King Cobra clutch, new quadrant and cable and...
  13. B

    Removed stock gauges, need help

    Mechanical water temp sending unit jrichker: I am also installing new auto meter guages, carbon fiber, in my rebuilt 5.0 I will tee the oil pressure with copper tubing with the stock sending unit. On the water temp sending unit I was wondering the same thing. Your saying that the sending unit...
  14. B

    What shifter

    Go with PRO 5.0 Another vote for Pro 50 shifters www.PRO-50.com 1991 Stang, T-5 trans with Pro 50 shifter BLK3DGT:SNSign:
  15. B

    Throttle body coolant hose size?

    COOLANT HOSE 5/16 (7.9MM) WEATHERHEAD COOLANT HOSE
  16. B

    what fluid to use in a t-5

    PRO 5.0 SHIFTER Go with a PRO 5.0
  17. B

    window problems

    Power window switch I had the same problem on my 91 GT. The harness between the drivers door jam and where it goes into the drivers door had a broken wire from the door opening and closing. You'll have to open the wire loom or tape to find it. Common problem on cars with power windows. Check...
  18. B

    AOD TO T5 SWAP!! NEED SOME HELP!!!

    AOD to T-5 swap You will need a new crossmember and rear trans mount. the back up light harness is no longer available through Ford. You will have to wire it yourself, only two wires. The spacer plate between the block and flywheel is different from an automatic and a stick. They are not...
  19. B

    transmision no shift

    AOD shot /Time for a T-5 I have a 91 gt also with an AOD(not anymore) car had 130,000 miles on trans. Pull that AOD out and put in a stick. Don't put alot of money back into that AOD. Did my T-5 change over and overhauling engine at same time. BLK3DGT
  20. B

    Trick Flow Upper Intake T/B Bolts (4)

    Thanks for your reply! Thanks Jerry, I'll see if I can get a threaded rod tomorrow at the hardware store or machine shop. That will work just fine. I am just finishing up the AOD swap to T-5 and overhauling the engine at the same time. Big project and Big BUCKS!! Will all be worth it, when I...
Top Bottom
Back
Forums
Menu