Search results

hi greamer i will try autozone, thanks. the only instructions say what the sensor's wires connect to, not what colors are on my vehicle. thanks for the tip.

hi guys, check engine light came on and the code reader says bad HEGO. i bought a universal O2 sensor(no plug) and need help with the wires. can anyone tell me the wiring code for a 2.3 1992(convert if it matters), so i can splice the new sensor into the plug. thanks johnny

this might help a little with shades of a color.... go into MS paint, draw 2 squares. using the color chart 2x click on the red, when the window pops up click on define custom color. Find the closest red to canyon and fill one square with it, then do the same with other shades of red to see...

one last thing to check, pull the actuator and bench test it to make sure it really is dead. it could be the switch. a month isnt instant, if it was electrical it should show sooner than that, unless there is a frayed wire or loose ground that pops up under certain conditions like stomping on...

my owners manual says it's on a circuit breaker located near the starter motor relay, however it is not a fuse that just breaks. if it gets overloaded it will shut down and reset itself. if you have a convertible, the power windows are on the same circuit. did you mess with the wiring when...

Thanks Aar0s, i wedged an old rubber door seal gasket then latched the roof. Went for a drive and can't feel air coming through. :) This should last for the winter like you said. Has anyone ever replaced the header seal? Is it difficult, any tricks or tips?

Hi guys, has anyone had their convertible roof let in water from above the windshield? it only happens when driving(and raining, duh). I can see the water coming in from the center of the roof, above rear view mirror, as if it is not pulled tight enough. can i/should i adjust the J clips to...

where is this relay?:shrug:

thanks rustbucket, my trim molding was missing and i have no plans for a radio currently. i am making my own trim piece to surround the hvac controls and a plate for the radio which i still have to finalize what i want it to have. maybe a clock, a guage or 2 and possibly a storage area behind...

hi guys, was there a clock option on a 1993 convertible? Does anyone have an after market installed-pics? I was thinking of building a cover/compartment where the radio should sit as i don't have one and thought this might be a good place for a clock and just wanted ideas. thanks. johnny

thanks for all your help folks, i had power going to the starter, so i replaced it.(probably the original anyway) and she started right up. Thanks again.

Thanks, i just am used to much older cars, i'm just being cautious overly i guess, like i said before i never had a car with sensors and such, i will test after work tonight.

i'm pretty sure the neutral switch works, i hear the clicking in park and neutral but not in D. Can you "jump" the solenoid in these cars and not worry about frying something or setting off the air bag?

Hi guys, i have a 92, 2.3, 8 plug automatic. Car ran fine after i just registered it. Today go to start and nothing. i tried starting in neutral, jiggling the shifter in park, jumping it-no start. the battery shows 12V on a meter and needle is on R on the guage, the fuel pump makes a noise...

How do the rear dew wipes install? The fronts were easy just like it was stated, but i can't seem to get the molding off the rear to access the wipes. thanks. johnny

thanks for the tips, i was going crazy trying to find the lifter, than all the crazy thoughts were coming like did i break it off, is that the reason the pump broke in the first place....now i now better. thanks again. johnny

hello, i have a stupid question. i've put many fuel pumps on chevy engines, i am trying to put one on a 351c and cant find the sliding piston to lift out of the way to fit the arm of the pump under. when i place the pump into position, it will go almost all the way in, but stops about an eight...