Search results

  1. G

    Car WILL NOT START

    Thanks for the help gents I will give this a try. Greg
  2. G

    Car WILL NOT START

    when I say chip I am talking SCT chip. But I will try a different spout connector as well.
  3. G

    Car WILL NOT START

    OK so I am going to check a few more things, one step at a time, and yes it is normal for the fuel gauge to read 0 when cranking the car over. -Check my grounds. -Check with test light that the injectors are firing. -Check for 12V at the injector red wire. -Pull apart the connectors at the...
  4. G

    Car WILL NOT START

    The no start issue started two weeks ago. The first time it happened I took all the logical steps. -Fuel pressure good (40 psi) -Check the plugs, I was not getting fuel on start up. -check for spark have spark. -changed the MAP still would not start. -changed the ignition modual still...
  5. G

    Can't go to WOT

    Ok its not my fuel system increased the fuel pressure to 42psi and you guys are right as soon as i get into it the fuel pressure the vac. drops and the fuel goes back to 42 psi. I downloaded the files so I can now log kamrfs now i am having problems opening my files in ea. calcon is showing...
  6. G

    Can't go to WOT

    I check with aeromotive and from what i explained to him he says no fuel pressure drop at wot my system is fine. So here is what I am thinking and if this is the problem do I feel DUMB if you look at my sig. vortec s-trim no belt. So i have the air flowing through the blower with no belt on...
  7. G

    Can't go to WOT

    Sorry about that i guess I should clear that up 39psi at 10"hg and then it drops to approx. 28psi at 25"hg so all considering I am within 2 psi of good pressure that being said when I removed the vac. line from the regulator and took the car for a drive the fuel pressure stay between approx...
  8. G

    Can't go to WOT

    :bang: Hello gents I am having some major issues! or at least i think so. First things first I can't log kamrfs thats in the process of being fixed but I still have my wide band. To date i have set all scalers values except for the new TB value, using ea set my vbat, injector offsets, base maf...
  9. G

    thermactor air control

    Thanks for the answer. Greg
  10. G

    thermactor air control

    I've done a serch and can't find any info on how to shut off the thermactor air control. I know its under scalar but whats the value do I enter. :shrug: Thanks Greg:eek:
  11. G

    Tweecer setting cam peramiters

    I learn something everday. Guess I should have said ONE wide band. Thanks for the info Greg. Weddings definately a killer on the pocker book.
  12. G

    Tweecer setting cam peramiters

    Thanks Jason. I just got my password for EA, looking forward to using it. Now for a set of wide bands. Money, money, money there's no end to the spending. Greg
  13. G

    Tweecer setting cam peramiters

    Jason I still have to download EA going to do that tonight. VBAT whats that?:shrug: I still need to learn alot. I tried data loging last night didnot work but I figured what I did wrong. I'll try again tonight if I get time. Are you running wide bands for your A/F? If so what make. Thanks...
  14. G

    Tweecer setting cam peramiters

    Thanks Grady :hail2: Consider it done :nice: Greg:eek:
  15. G

    Tweecer setting cam peramiters

    OK so I have learned quite a lot in a short time thanks everyone:SNSign: Always woundered what EA stood for thanks Greg. Grady the fairlane came from TX I just imported it to :canada: nothing quite like southern sheetmetal. I've got the car now idling at a steady 850rpm:nice: Next thing to...
  16. G

    Tweecer setting cam peramiters

    So the EEC anaylzer is worth the money? sounds good I am going to purchase a set of wide bands for my A/F right now I am in the dark didnot realize I could not see my A/F without them. Your right Greg I can't get onto the eectuning site so I am kind of pulling my hair out as far as setting...
  17. G

    Tweecer setting cam peramiters

    Guess I didnot pass spelling class!!!:nonono: My sig is up and running. The slopes are the only thing I have set so far under the scalars. I have been doing some reading and am trying to figure where and how to set breakpoints:shrug: I see where some guys are running the cobra program...
  18. G

    Tweecer setting cam peramiters

    I have just installed and got my tweecer up and running:D I have turned off my EGR. Set my MAF curve. Set my injectors. Set CID. I have 2 questions:rolleyes: first is there anyway to install my cam specs and if so where? second other than data loging whats my next step:shrug: one...
Top Bottom
Back
Forums
Menu