Search results

  1. E

    adj prop. valve

    i did a 3 to 2 port swap on my fox body master cyl and i have to put an adjustable prop valve in line to the rear brakes it the knob style one from jegs anyone ever messed with these at all i need an idea for the initial setting on it thanks ethan
  2. E

    need help with brakes desperate!

    ive gone to school for three years for mechanics and im sure the brakes were bleed correctly right rear left rear right front left front using the two man method 10 to 12 times.... after that still having no pedal i tried a vacuum bleeder with the same result.... im not very familiar with a rear...
  3. E

    need help with brakes desperate!

    bought an 89 lx notch with a rear disc brake conversion i could not by any means get the brakes to bleed.... with the car off you can bleed them and get a had pedal until you fire up the car the pedal goes to the floor with power assist. i thought the master cyl was bad so i replaced it and...
  4. E

    what a relief!!

    finally got my fox body fired up today im in f-in love its a beautiful thing .... im sure a couple of you fox body guys know how im feeling right now....big relief actually got to drive the car i had for two months for the first time today
  5. E

    update on my 89 project fox (pics)

    just some more pics of the progress ive made on my car ....i must say i think its coming along really nice considering this is my first fox body tell me what you guys think of it thanks alot ethan
  6. E

    my project 89 notch is moving along

    the displacement is 310 its 60 over i know i know ...your gunna say .060 over! not good but its only .015 more on each side of the bore it wont be a problem i will most definatly keep the forum updated with pics i just got the motor back today and its almost ready to go on !!! please leave some...
  7. E

    my project 89 notch is moving along

    hey guys my car is moving along pretty smooth i posted asking about 4 lug wheels....well i got some want to see what you guys think ...also a few more pics of whats happening at the machine shop... thanks ethan
  8. E

    has anyone ran this intake setup?

    i just picked up this carb and intake brand new its an edelbrock air gap manifold and holly 650 classic with russel fuel log.... if so how did you like it what kinda power did you make
  9. E

    new motor on its way

    the block is in fact stock the machinist doing the work would not let it leave his shop if it was not safe he is very passionate about his work if you couldnt tell by the workmanship it will have no problems with cooling the block was origanally .030 over but would not clean up with another .010...
  10. E

    new motor on its way

    just stopped off at the machine shop today to check up on my motor its being bored .060 over speed pro forged pistons new ford rods and the bottom end is being balanced and assembled for 1800 big ones ....heres the progress so far ...polished crank bead blasted block and new pistons .... does...
  11. E

    pics of 4 lug wheels please!

    hey guys thanks for all the responses all those wheels looked great but i found something a little more suitable i think..... centerline convo's 15x8.5x4-4.25 in the rear and 15x6x4-4.25 in the front ..... the rear has a 5 inch offset will this clear a stock rear end setup with 275's? and i...
  12. E

    pics of 4 lug wheels please!

    cobra r's look pretty nice but i think im looking for something more drag oriented
  13. E

    pics of 4 lug wheels please!

    hey guys i have an 89 lx that was a 4 cyl now its rockin a 308 but its bare with stock wheels i figured that this would be the best place to see some 4 lug wheels im having a hard time finding a 4 lug wheel i like if everyone can post a pic of their car with 4 lugs and what kind of wheels they...
  14. E

    lowering springs

    what brand spring will lower my 2002 the most i will scrafice ride quality i just want the car to be absolutly slammed to floor the car has no body kit does anyone know what brang spring i should use ....does anyone have any good links
  15. E

    overhaul is done

    when the car was still running i had delteed the smog pump... the car has no cats but it still had an egr on it at that time. there are no leaks around the block off plate. im going the give the plunger trick a shot and see what it does is there something availble that trick the computer to...
  16. E

    overhaul is done

    hey guys this is the first time ive posted in a while my car has been down for over a month i ripped out the motor and rebuilt it the car is fairly stock it has stock heads and cam and is not bored only mods are minor bolt on s the rebuild went smooth and i got the motor back in a few days a go...
  17. E

    quick clutch question

    ive got a 94 gt clutch is startin to go i just ordered an new one through my work 20% discount :D its a zoom stage one i pay 269 - the 20% when i pick it up has anyone used this clutch ..am i gunna be happy with it my car is a daily driver and doesnt have much power over stock but i still want...
  18. E

    whining noise

    ive got the same problem as you ive got a 3:73 gear but was in the car when i bought it and the car has done that sense i bought it 1000k miles ago it seems to be fine but would love to fix it good luck finding the problem
  19. E

    94 gt headers

    thanks for the replys that helps alot i think may go for some unequals cause its a pain to change plugs with stock headers as it is. has anyone messed around with the heat wrap?
  20. E

    94 gt headers

    ive looked around at most of those headers i was thinking about an equal length header. is going with an equal lenght goin to give me more performance than unequal and has anyone installed equal lenght headers on a 94 are there any clearence issues thanks for the replys