Search results

I have a set of 1970 351W heads for sale (DOOE casting). The heads were ported by a local shop and were recently rebuilt with new valves, guides and seals. They're set up for 7/16 inches stud mount roller rockers and have dual springs installed. I'm selling them because I upgraded to Al...

Do you still have this supercharger? Please send pics to [email protected] Thanks, Ben

Perseverance is really the only way. I have small arms and usually reach over the engine mount from the front and then get the bolt off using a ratchet and an extension about the length of the starter. If you work at it for a while I'm sure you'll find a way that works for you. Good luck.

Thanks for all the help. My car is an 85 GT. There are a lot of wires coming in and out of the connection pictured. The wire I initially thought was the problem is solid blue (I think?). But, looking closer, all of the ingnition related wiring is ratched and garbage, I'm suprised it...

Thanks for the help, I'm pretty sure it's the connection or the crappy wiring leading into it (which you can't see in the picture). I have replaced every other part of the ignition, with no luck and when I cleaned this connection and moved the unprotected wires apart it worked intermittently...

Hi everyone, My car was turning over and getting fuel, but not starting. After following jrichker's Cranks OK, but no start checklist I found a bad connection near the ignition module where some unprotected wires were touching (by the way Jrichker, thanks for the help, I plan to name my...

Thanks for the help, your interpretation sounds pretty right on. My engine consists of a Coast high performance 393W stroker kit, TFS track heat heads, edlebrock performer RPM cam and manifold and holley 650 double pumper carb. The ignition is the stock 1985 mustang duraspark ignition and...

Hi guys, I just finished installing TFS heads on my 393W and now the car won't start. The engine ran fine with the old heads, but I can't get it to fire now. The engine turns over well when I hold the key and I can see gas spray into the carb when I pump the throttle. I tried testing for...