Search results

It "Should" be an A9L or the like. Someone pulled the sticker off so I dont know for sure. It has A Tweecer on it and I havent gotten into the tuning on it yet. The Fox EEC does have the hardware to run a single speed fan. Sometime the pin has to be added to the connector. And things have to...

Hello. My Dads 68 we acquired a few months back has an EFI swap done with a "Dunne-Rite" performance Harness and Relay Panel. I cant seem to find any Diagrams online anywhere as it appears the company is no longer around. Problem im having, is that the AC (aftermarket, though factory ac car)...

Nice pictures and everything but you did way too much work. you do not have to take off the front piece and move any of the needles. Did you do white face gauges at the same time or something and just not add those pics?

Take the back off the gauge cluster and look where the odometer chasis is. There is a little motor that turns a worm gear that turns another gear which makes the odometer turn. They break pretty easily and most people will tell you that new ones arent available. BUT... I know a guy who makes...

I can get them. email for details. What up Brian?

well, like I said. GT40P heads and regular Longtubes. The spark plug points right at the headers and their isnt enough room to hook up the hose (with the adapter because of the long reach plugs.) I think Ill change to some 15w50 oil and leave it be for a while, probably just my rockers...

cam card lists 115-125 closed 300-325 open. Yes I run 1.7 rockers so lift is .515 .496 up from .467 .485

do you know the spring pressures of the previous springs? I have valve train noise that wont go away and I have been wondering if my springs are too much. I use comp cams 987; [email protected] [email protected]. I wouldnt have bought them but the book I have [email protected] so I didnt think they were that stiff...

x2 steeda balljoints lower it 1/2 inch or so. adjustable struts dont do anything for height.

this is the 94-95 5.0/5.8 forum, wouldnt expect to get much help in here

havent you run since you did the rear end?

king cobra now, then later on if you need more just get a Mc cleod disk. What the others said. Plus a steel bearing retainer. Autozone sells the Timken stuff, good quality.

I bought that VHT stuff from summit a while back and did my tailights. I like it to break up the red on my lazer red car, Used to get a lot of compliments (probably still would if it came out of the garage more often) but now I need to repaint and re-do tailights (im picky)

yep, upper control arm bushings on the axle. might as well replace them with sphericals, got mine for about $85 through a UPR distributor. use a holesaw on a drill to drill out enough of the rubber (get a long one, mine was too short and only went 2/3 of the way) And a sawzall, the...

Tires will help the most. Nab some 15 inch v-6 wheels cheap and get some 26x 10.5 ET streets. Or if you dont want to switch back and forth BFG DR's (better hooking) or Nitto DRs (better street). This will run about $300 either which way. Dropping some weight will help. yours is a vert...

dont spend a fortune changing anything yet, (like the cam especially for a TFS1 bad idea). Tuning, Tuning, Tuning, Tuning. Maybe a better intake, if anything as far as hard parts. It should put out a bit more power and hopefully the magic # but who knows. youve got to be running better...

is this the 60mph shake? our cars have a TSB ( i think) about the front contol arm bushings causing this problem. Dont replace the bushings, replace the entire arms with new updated ones. its cheaper and easier.

i run 94-95 BBK longtubes. 1519 or something. Made a special wrench which works great and had to flip 2 plug wires to get 90* boots on the plug, I need to get a new set with all 90's but cant seem to find anything

I was just at a local pawn shop and saw a custom (or factory custom type) sub box with a 10 or 12 and it had 2 little amps on the side. The speaker and the amps each said MACH on them. Does any other vehicle besides a mustang have a some sort of MACH system? I could have tried to ask the...

yeah thats right, it was from a friend of mine. If you decide for any reason not to keep this stuff you are obligated to offer it to me first! sell ya my P's hehe