Search results

  1. Cobra123089

    Intake with gaskets built in?

    you can reuse the bolts, my replacement manifold has the same thing, i just bolted it down with nothing else. No known issues since 08
  2. Cobra123089

    stuttering at low rpm after head/cam/tune install

    I have dealt with some of the issues you mentioned, I have MHS 4.5 cams. For the hanging idle here is what i did: I followed this procedure http://www.lasotaracing.com/tech idle.html with the bigger cams the t/b blade needs to be opened a bit more for it to idle with out too much help from...
  3. Cobra123089

    Summit o/r H pipe

    I used one on mine when i had shorty headers YouTube - ‪Mustang Comp Cams 270 Idle‬‏
  4. Cobra123089

    Has anyone removed their PCV hose to the intake and put a breather in?

    I dont see how its a vacuum leak. The air never enters the combustion chamber therefore it can not affect a/f ratios. I understand that the stock PCV vents after the maf in the intake tube, but that air/oil should not have o2 in it. maybe you can explain better.
  5. Cobra123089

    bad H.I.D. problems... any ideas?

    hid s are very sensitive to voltage from what i hear. On my audi if i turn on the brights my hids will flicker (these are oem hids) I have gone through the wiring and cant find anything "wrong" some people say its a ballast issue as well. Maybe this will help in some way.
  6. Cobra123089

    Build pics, TFS headed 2v turbo car

    those cams are killing your low end spool, get a set of turbo cams or even put the stockers back in. Check out ModularHeadShop he has a cam trade in offer.
  7. Cobra123089

    3.55's or 3.73's on turbo car.

    yes a lower gear numerically will help load the turbo and spool it. I ran 4.10's with my turbo it sucked.
  8. Cobra123089

    typical cam problems

    do you have a tune? I had misfire codes with my comp 270's and no tune. Mine did not feel like a misfire tho. I would pull the codes again and then look for coolant in the spark plug well of the mis firing cylinder
  9. Cobra123089

    My experience with On3Performance

    I had the time on monday the 22nd to install it and i just wanted to give my thoughts on the kit and service from on3. received on thursday 3/18 did a inspection of all the parts. Everything looked great no major defects. Go done going through all the boxes and was like where the hell is my...
  10. Cobra123089

    Removing "dog bone" mott bar?

    why is that there to begin with? any down falls of removing it, i only have 4.10 no alum drive shaft
  11. Cobra123089

    Ford GT Fuel Pump: Fuel Pressure all over the place?

    i used heat shrink on the GT outlet and just used the stock fuel outlets. Guess we will see when i go for a drive, just waiting for my seat brackets to come in. Does the pressure bounce at all while idling? I might go hook up a gauge to mine to see if its all weird...
  12. Cobra123089

    Ford GT Fuel Pump: Fuel Pressure all over the place?

    how did you put the stock fuel line on the pump outlet? Maybe its leaking or something. I know it does not explain the increase in pressure but maybe something is happening. I put my GT pump in today and have had no problems, but i also have not driven the car yet, just idling
  13. Cobra123089

    fuel leaking out the exhaust manifold

    if it was fuel and the manifold was hot it would have cought on fire.... Its not uncommon for water to condensate and drip out. My car spits alot of water, even with out cats.
  14. Cobra123089

    K Member Comparison

    I love my AJE k member
  15. Cobra123089

    Secret Incantations for GT front brakes ?

    We dont have boosters...
  16. Cobra123089

    why would my car be so light?

    dude i seriously i get the point your trying to get across if you read my posts i state that. If you look hard enough you can get the gross weight of vehicles. The jeep was bought new and i have done everything mod wise to it. Knowing the history of it allows us to thus compare it to the gross...