Search results

  1. H

    Will a stockish 289 take it in the 10s.

    Guess you missed the part about me spraying it.
  2. H

    Will a stockish 289 take it in the 10s.

    Its a c5 block NOT a roller. The old blocks will take alot more abuse than the roller ones. These blocks will take 550-600hp and that will push a fox past 10s.
  3. H

    Will a stockish 289 take it in the 10s.

    I might have to take you up on that. Before I put the bigblock in there I had a stock 302 with a F cam and torker intake with a 100 shot with a c4 and 3.08 gears went a blistering 14.48 on the motor and 12.50 on the juice. Now the car has better suspension and a 3.70 gear with a 9in rear. Im...
  4. H

    Will a stockish 289 take it in the 10s.

    Me and my pops was talking about 289s. We was wondering how much a 289 will take. My bigblock is coming out this year and is going in another car. We are putting a .060 289 with stock rods and crank. Comp 280 magnum cam. Heads will be 66 289 or gt40ps and the intake is a torker. I have a eddy...
  5. H

    On a budget.. which motor would you build?

    Your looking at it all wrong. Roller 302 break at what 500 horse. Stock 460 block and crank will hold 800 horse. its so easy to get 500 horse and 550 ftlbs of torque out of a 9.5 compression small cam dove c heads stealth intake. It will run on pump gas. I have on in my gt it fits good with no...
  6. H

    Few questions on a 460

    He dont have stock rods for twisting it to 7300 rpm. Stock rods that that are not worked will go safely to 6000 rpm. There is a good right up on rods and everything on 460ford.com.
  7. H

    My bigblockfox

    I wish i could post pics but i cant so here goes. Its a 87 gt body with a ford 9inch with a 3.70 gear full spool moser 31 spline axles with 28x10.5x15 slick. The motor is a 466 with trw domes 12.5 to1 compression with c9 heads ported intake and exhaust with ss cj valves .631 .292 solid roller...
  8. H

    Roller Motors

    460s never had roller cams. You will have to do a conversion.
  9. H

    460 in my vert

    Running a stock bellhousing is fine. Go to 460ford.com. Lots of info of there. It would be best to put a tube k-member in because it opens a lot of room up. I have a 466 in a 87gt and I used to have stock fox v-8 springs and the car set right in the front and did not set to low. You will have to...
  10. H

    Is this 10.1 compression ratio

    I am wanting to get 10.1 or more. I have a 88 stock shortblock that is fresh with stock pistons stock deck height. I am putting a pair of heads that have a 58cc chamber on them. Will this give me the compression ratio I want? This car is a strip car only and will the e cam or tfs1, or 2 cam be...
  11. H

    tfs stage 1 cam with 1.7rockers?

    I have both 1.7 and 1.6 rockers. What would it change with the 1.7s. I know it would change lift but would it run better, worse or sound any different.
  12. H

    tfs stage 1 cam with 1.7rockers?

    Has anyone ever put 1.7 rr on a tfs 1 cam? My motor is a 01 explorer shortblock with stage 1 cam c9 351 windsor heads ported to hell and back with 1.94 1.60 valves and have been shaved to give a 58cc combustion chamber. Also what would my compression be with these heads and stock pistons?
  13. H

    77 coupe parting out or whole car

    I would also like a black dash top let me know a price.
  14. H

    newbie with some ?s

    I am new to this site and I was very suprised to see a mustang II forum. Well I have a 78 cobra with a 306 and 12.5 compression a voodoo cam with 268 duration and 522 lift with gt 40 heads edelbrock rpm intake with a 650 double pumper. The trans is a c4 with a 2800 tci stall that goes into a...
Top Bottom
Back
Forums
Menu