Search results

I'm about to order some Distinctive Industries Touring II seats and can't seem to find rear seat upholstery anywhere that isn't a full kit for front and back seats. I don't want to have to pay for TMI upholtery since I don't like their options. Anywhere you guys know of that sells rear seat...

Replaced the core on my '67 with AC and went to test it and it blows through the floor vents only. I've checked all the vacuum hoses and they are all hooked up. The switch diverted air to the right place before I replaced the core. Do the vacuum diaphragms need the car running to be able to...

I bought wheels and tires a few years ago and didn't notice major scrapes until I moved from West TX to the Hill country of TX. I researched and went by the chart I found on here for tire figment. I have 17x8, 4.5 backspace, zero offset, and 245/45/17 on back. I replaced the rear soft springs...

My car is running pretty good and I'm looking to put a few thousand into it the end of summer or early fall. I've been feeling the need for some more speed parts but not sure what order I should do things since I usually put about $1500 in the car per year. It's a '67 with a stock 289 except...

I have the weekend off and the weather is supposed to me nice so I'm looking at something I can do to my car that is fairly cheap and will yield good results. Recently I've replaced the front and rear suspension, shocks, intake, carb, heater core, painted the engine compartment. I was...

I will be putting my heater core back in the car Saturday and replacing the heater hoses. I currently have the heater hoses laying in the floor and can't remember which hose connects to which outlet and which hose is supposed to connect to the control valve (or whatever the little vacuum pump...

I'm in the process of trying to replace my leaky heater core but having trouble figuring out what all needs to be disconnected and where the screws are that hold everything up. Every time I look under the dash all I can see is wires, duct work, and cables, which makes it hard to see how it all...

Last weekend I installed the Ignitor I and afterwards it fired right up was running rough and missing. I checked everything over and over and thought it might need the full 12V to the coil, but never could find anything saying that it for sure did. My friend suggested running a wire to the...

I should receive my new suspension parts on December 29th and I'm looking for a little help removing everything and installing the new parts. I purchased a basic rebuild kit with new upper and lower control arms plus all the rubber bushings. I'm having trouble finding many instructions on the...

I need to replace the rear leaf springs on my '67 so I can put my wheels and tires back on without it bottoming out and rubbing the tires. I have seen some 4 1/2 leaf mid-eyes that I think will work. My question is, I already installed some 620 lb. drop springs on the front, so the car sits...