Search results

hey guys im looking for sme help here i pulled my tranny out to do a clutch, and upon putting it back in the b1s1 plug on the harness side fell in between the block and bell housing. i didnt relize this untill i wento go plug it in. i pulled the trans back outpulled the harness out and put...

Hey haven't posted anything in a long time I am looking for help my rockers as they might be causing my misfire. Here what I am running... 306 with forged DSS flat tops stock crank and rods F-303 cam with stock heads .530 springs stamped steel roller tip rockers and stock length push rod but...

on to start off heres my set up. 306 with d.s.s forged flat tops, stock rods crank, stock heads, with 580 lift spring 1.6 roller tip rockers stock push rod. F-303 cobra upper lower intake with 1 inch spacer 70 mm T/B. car is S/D 19lbs injectors. The problem is i cant get the car to start...

ok so i havent posted anything in while. but today i took out my hid kit and put reg bulbs in because in selling the car. when i changed them everything seemed to be ok tonight i checked them in the dark great nice and bright and i noticed my high beam light was on. So i checked the switch and...

hey guys im replacing the brake line on my car from classic tubing and it dont seem to fit just right:shrug:. i need some referance pictures of the passenger side front brake line from the engine bay to flex line and how its routed thanks alot guys

hey guys i have a QA1 k-member for sale it will fit 1996-2004. its brand new dose have little scratches from test fitting motor ( in fox body) some how got the wrong part number from the parts rep and cant do anything with it now asking 225.00 obo need to get the right one for my car thanks

hey everyone, ok so i have been building my 306 for the last 7 months, I picked up a turbo kit from a good friend that had lost his car. The turbo kit is now a universal kit do to the fact he bought it for his bmw. What is done to motor is, it's bored out .30 with D.S.S forged flat...

hey guys putting the final touches on my 306 for budget i went with e7 heads im not putting any emissons on the car, and would like to know what sizes the hole are in the back of the head for the emissons tube. dont see the need to spend 10.00 for two bolts

ok so i am getting ready with in the few days to drop my motor in the car. i did some ebgine bay work. i also converted to car to a mass air car. now with that all being said yesterday i finally put the dash back together hooked up the battery to make sure everything was good to go. now wen i...

dose any body know of a bolt size brake down for the engine from the intake to the oil pan. I need a few things to finish the motor and need the bolt sizes and lengths to finish it thanks guys..

hello everyone, Ok to start off i have a 87 gt that was s/d car. i just bought the mass air harness from a buddy ou of an 90 (dont remember if it was a gt or lx). so i get the new harness in and there is and extra gray circle clip by the ecm. and two white ones that are in the engine bay...

ok i am looking for a supercharger kit for my mustang and cant find alot (well i can but its not a roots lol). I really would like to go with a roots, i have a buddy with a eaton off a lighting that he will give me but i dont want to take it unless i could get it to work on the car. i know there...

ok so i picked up a 302 from a buddie block was done .030 over needs to be built. but n e ways i would like to freshen up my stock gt heads new valves, valve springand i am doing roller rockers. i would like to mayybe get the heads ported n polished. but after buy the 306 i dont have to much to...

ok so when i get my tax money bac i was looking to get an new motor. i was thinking about going 331 stroker but not sure do to the fact i have maybe a 1000 to play with now. i was thinking about a forged 306 thinking that it maybe a bit cheaper and i can get it with a blockand already done just...

ok so the other day i went and picked up 24 for 30 bucs about a 1yr old. anyways to get to the point. i was talking to my buddy to day and he told that the pcm is going to have to b re tuned for the 24 cuz it will have the car run bad or even break some thing. i only picked them up do to the...

ok to start i am going nuts trying to find it. heres my problem if the car is cold it will start fine and idle fine that is until i step on the gas just a lil bit and the car brakes up and back fires. let it warm up and u can rev it up but if u put it i 1st and start to go the car brack up again...

sorry this is a bit long but tryed to give as much information as i could.. i am thinking that maybe this just maybe a ground issue but would like to know if it is more thanks alot guys... ok so i live in new jersey and it snowed the other night. n e ways i drove up north closer to work...

ok so just bought a spooled rear end out of a 9 sec car.. i got it from my buddie he swaped car bodies, and never checked to see if there was gear oil in it. well needless to say rear end locked up on him. i looked over the rear high and low to see what was bad and just turns out the pinon...

ok so wen my car gets hot it dies out and is a pain in the rear to get started again. it dose this around maybe 160 to 180 dagrees. i dont know if this helps or not but my buddie help me out with the car and wen we took off the fuel injection harness he cut off some of the sensor. he said he did...

ok i did a intake swap from a stock HO to the cobra intake. i have to get the car timed bad. But the last couple of days there has been smoke coming from the exhuast. yes i know smoke will come out from the car sitting for a bit and thats wht an exhaust dose. the thing thats is bothering me...