Search results

  1. K

    First attempt at a music montage

    I liked your video. The sound quality is great. Do you have the standard magnaflow mufflers or the Magnapack mufflers? Your offroad X pipe you noted was a BBR. Did you mean BBK? I have never heard of BBR.
  2. K

    What ehaust does this mustang have on it?

    What exhaust does this mustang have on it? http://media.putfile.com/05-Mustang-GT
  3. K

    Black Deep Dish Bullitt Rims

    Anyone else have any pictures of an 05+ GT with the 20" Bullitts installed?
  4. K

    LONG TUBES (where 2 buy?)

    SummitRacing.com, or Rpmoutlet.com
  5. K

    Transmission Removal HELP

    I found the two bolts at the top. Can you guys give me any ideas on how to get to them. I have the tranny hanging off the back of the engine just so I can see the bolts. It takes three extensions and a swival to just reach the bolts.
  6. K

    Transmission Removal HELP

    I am in need of info quickly. I am tring to pull the tranny from my 01 Bullitt (3650) and the damn thing appears to be still attached to the engine some how. I have removed 5 bolts from the bellhousing attaching it to the engine. I have removed all wiring and shifter and the tranny...
  7. K

    Stock Rims VS Custom Rims

    Fix your links Bro. It would be nice if we could see them.
  8. K

    Acceptable hood 4 my bullitt?

    I like the Steeda or the Cervini hood personally. I have a Bullitt as well and have considered the Steeda hood without the louvers. I do not think this hood looks great on the black cars. I tend to like them on the lighter colored cars (White, Silver, Yellow, Red, etc).
  9. K

    Hawk, Greenstuff, or OEM pads?

    I have the ebc greenstuff pads. My stopping power is considerably better then the stock Bullitt pads (Cobra brakes), and brake dust is less but the green pads look like christmas matched up with the red Bullitt brakes. I had to remove my pads and paint them black. They do squeal like the...
  10. K

    Finally tuned my car...myself :)

    Yeah, what are you using to read your A/F?
  11. K

    Uneven drop from springs? How to fix?

    I have a Bullitt with the stock springs. My car sits 5/8" higher in the back on the passenger side. Never noticed it until I changed my wheels out. You can buy thicker isolators for the side that sits lower.
  12. K

    Bucking Problem. Need Advice.

    I have nothing more then long tubes, exhaust and a K&N filter. I will check the plugs this weekend. Can anyone tell me what the correct gap is for the stock plugs?
  13. K

    Bucking Problem. Need Advice.

    My car has developed a severe bucking problem between the 1k and 2500 rpm's. I thought it was caused by the removal of the maf screen but I replaced it several weeks ago and the problem still exist (I reset the computer). I replaced the air filter and have turned the AIT sensor here and there...
  14. K

    Installed Kenwood Head. Sounds horrible.

    I have a mach 460 with the six disc head unit. I replaced the head unit with a Kenwood KDC MP522. It sounds terrible. All my cd's sound like I am listening to a garage band play live. I used two wiring harness', one for the head unit and one for the amps. The harness for the amps only...
  15. K

    Those using 160 or 180 Thermostat...

    Why would it effect your gas mileage? Does not make since to me.
  16. K

    Hit the 1/8 mile last night

    The Bullitt and myself did not farewell last night. Reaction times were consistantly over 1 second. 60Ft times averaged 2.2 seconds. 1/8 mile times averaged 9.4 seconds and mile per hour was consistantly 77mph. I was racing against my buddy in his slightly modded 95 Trans Am. He was...
  17. K

    The Dyno is in!

    Nice numbers. To confirm all you have are Flows, pulleys, diablo, cai, and longtubes installed. Question for you: is your diablo a mail order tune or a custom tune?
  18. K

    Brake rotors warped again

    This is the forth time my rotors having warped in the past 7k miles. The first time I had the rotors turned and I installed new brake pads. The second time Ford replaced the pads and turned the rotors. Third time ford replaced the rotors. Now there warped again. Keep in mind I have a Bullitt...
  19. K

    Installing gears myself this weekend.

    Most everyone is so quick to say this should be left up to the pro's. Well the pro's you speak of were just like you one day. You have to wanna learn. Never-the-less, thanks to all who contibuted information.
  20. K

    Installing gears myself this weekend.

    Can someone explain to me steps 5,and 7. I cannot comprehend how to measure the backlash with the dial indicator as I have never used one before. Also, I need more detail on how to "setup the dial indicator to check the run-out of the ring gear". Can someone define run-out? May be when I...
Top Bottom
Back
Forums
Menu