Search results

I'll believe it when I see it. There are companys like rod n custom and jim meyer racing that claim in magazines they have kits for 65-73 but,if you acually call them they don't have 71-73. I have heard rumors,aje racing is working on a kit for 71 torinos which is the same 71-73's. 71-73 cars...

I'm fully aware of this. The only reason I'm going with rack and pinion is because The modular motor won't clear the steering box. The stock manifolds and or aftermarket headers won't clear on drivers side because of steering box. It was either custom headers or rack and pinion.

71-73 Mustang rack and pinion update Well,Just wanted to inform anyone who may be considering the rack and pinion set up for the 71/73 mustangs, offered by RRS.....DONT WASTE YOUR TIME!!!! Their website clearly states that they are offering bolt in 71-73 power rack and pinion set up. I ordered...

Brand new,never used,still in packaging Aftermarket,not NOS These parts are for a 71-73 mustang with power steering! Centerlink $45 Idler arm $35 Pitman arm $75 Steering box seal kit $15

Starting a list of extra parts I have for sale. I bought alot of stuff before I knew which direction I was headed in for my resto job and never used it. Everything is for 71-73. prices don't include shipping. The bottom half of the list contains parts from a 73 mach 1,I parted out. About 15...

Starting a list of extra parts I have for sale. I bought alot of stuff before I knew which direction I was headed in for my resto job and never used it. Everything is for 71-73. prices don't include shipping. The bottom half of the list contains parts from a 73 mach 1,I parted out. About 15...

I don't have the directions in front of me but,from what i can tell,you'll have to either cut or replace the existing shaft in your oem column to allow for a DD shaft and universal steering ujoint. If I go with an aftermarket column,I'll probaly sell my tilt column. The tilt columns for 71-73...

Thanks for taking the time to help figure this out.... One more question,you said here....... "Use the diode group to jump between the HS and LS wires. The diode band will need to point towards the LS fan. The diode will prevent the LS current from back feeding the HS fan when only the LS...

I guess the real question is,does the LS circuit cut off when HS circuit is engaged? you look at acual fan shroud in the car,there is a 3 wire(LS+,HS+,Ground) connection for the fan. The device I'm talking about on the fan shroud contains a ballast resistor and fusible link. The link will open...

well,here is the deal,I have the 4.6 2v going into an older stang. I bought a mishimoto aluminum radiator for the 95 stang because it fits better and wanted the filler cap on the radiator. The 99-04 radiators use that sealed system that requires filling the system through the reservoir on top...

ok,just bought the mishimoto dual cooling fan set up. I'm going to run these in an 04 gt. If I've done my research correct,The oem CCRM has a relay to control the fan during normal operation(low speed) and one for when a/c is on(high speed). So,the oem single fan runs at 2 speeds. In which I'm...

I don't have a manual handy to check for this so,I'll ask. On an 04 mustang gt 4.6 2v with the returnless style fuel system, there is a little,round,shinny metal diaphram looking thing inline just before the fuel line attaches to the rail. There are no vacuum lines or electrical connectors. Is...

yes,its made for stock style suspension and or they're suspension setup,etc. They're strut suspension setup does away with the upper ca's but,steering attachment locations are the same as oem. I just throw on my oem outer tie rod ends so,they the rack can attach to my existing spindles. Kit...

ok,well I broke down and bought the RRS power rack and pinion set-up. The prices were aus dollars and with shipping to usa came to $2300 us dollars. Kit comes with complete rack,all mounting brackets,hardware and a special shaft and u joints to connect to my existing column. Should be here in 3...

well,there are choices for rack and pinion for 71-73 mustangs. Trust me,I've been doing extensive research and talking to alot of people in the business. The cheapest one would be from Fatman Fabrications which comes as a kit which includes a new lower cradle to support a-arms,99-04 stang...

mod motor swap hello everyone! Been a while since I've been on here. I finally finished the install of Ridetech rear 4 link airbar setup. A few minor modifications and it fell into place nicely. The 4.6 2v Mod motor fits like a glove with plenty of room to spare. I have the motor tucked back...

I'm acually in MD. I checked out the AJE racing kits before because that would have made the engine and suspension swap a breeze. But,the 70 mustang kits wouldn't be wide enough for the 71-73's. I would have definately been interested in working with them but,I'm already too far along to turn...

71-73 mustang 4.6 swap I've been reading this tread and thought I'd share my brain. I have been into the 71-73 stuff for a while and love the restomod cars. I'm currently working on a website with all my pics and info. I'm in the process of building a really cool restomod 71 mach 1. I'm...