Search results

  1. bigsexxy422

    ambeant air temp location

    Well the car has a vortec charger on it. With an aftermarket maf. I alsp found where they cut the wires for the iat sensor at the maf connector and ran it to a different sensor they must have installed into the intake tubeing just befor the throttle body. I unpluget the sensor and saw the iat...
  2. bigsexxy422

    ambeant air temp location

    I am working on a mustang for my boss and the car is running very rich. I connected my scan tool to it and it says that the ambeant air temp is -7 degrees. I cant seem to find the sensor tbough. Where is it located?
  3. bigsexxy422

    head bolts

    no they are not stock bolts, anhow thick should the washers be?
  4. bigsexxy422

    head bolts

    i am installing the heads on my engine tonight and i was wondering. i am replaceding the old cast heads with new alum. heads. do i need washers on my head bolts to keep from digging in, or should it be ok with out the washers? the cast heads didnt have any washers on the bolts.
  5. bigsexxy422

    timeing chain strech

    i am assymbling my engine and i am wondering if i should use my old timeing chain or not. it is a double roller, and when i removed it the chain seemed to be streched, i am wondering how much they are expected to streach, and if i should use it or order a new one. this one only has maybe 7k...
  6. bigsexxy422

    oil leaking on headers and burning?

    nevermind that last one, brain fart, it would be inside the exhaust not on it.
  7. bigsexxy422

    oil leaking on headers and burning?

    just throwing this out there because nobody else said it, but what about valve seals? just a thought
  8. bigsexxy422

    balancer weight

    its a 302 currently bored out .030
  9. bigsexxy422

    balancer weight

    well i was able to run a tap dont anf get the threads cleaned out. just need a new bolt, no big deal, but just because you have me interested, how much would the stroker kit you are talking about cost me? i have around a 600$ budget
  10. bigsexxy422

    balancer weight

    well when i installed tghe flywheel i had the 50oz weight on it, i started the car and it did shake like crazy, so i pulled the 50 off and put the 28oz on and it was much better. but that was on the flywheel, the balancer i never touched till i pulled it off and found the 50 on there, it did...
  11. bigsexxy422

    wanted to buy 347 crank

    i am looking for a 347 crank and rods
  12. bigsexxy422

    balancer weight

    im not really shure if i am going stroked yet, i still need to see if i can fix the old crank. i tried removed the harmonic balance bolt and it was comeing hard. so i called the guy who i had build my motor a few years ago (big mistake) and he said you need an impact to remove it because of the...
  13. bigsexxy422

    balancer weight

    crank is not out yet, but it may be soon, and replaced with a 347 crank
  14. bigsexxy422

    balancer weight

    i am wondering what the ballancer weight should be for a 1980 engine and crank, is it 28oz or 50oz?
  15. bigsexxy422

    head gasket question

    ok thanks for your help, i need to get this thing going as soon as i can, i am sick of driving this crappy 4 cyl auto malibu
  16. bigsexxy422

    whats the biggest cam in a stock 302

    i already have this block bored with new all new bottome end bearings, and new pistons in it, so i would rather not switch blocks. i was looking at the cams on summet and found this one Lunati 00061, what do you think, good for that combo? i have a cam in the car with 284 advertised duration...
  17. bigsexxy422

    head gasket question

    now that is just the head gasket right, not a engine kit
  18. bigsexxy422

    whats the biggest cam in a stock 302

    ok well here is the thing. that cam is for a roller set up. my block is a 1980, so it is not set up for a roller set up, i really dont want to spend all the money for new roller lifters with the tie bars, and i would rather not have to drill any holes in the block. so i am wondering if i can...
  19. bigsexxy422

    head gasket question

    i am getting ready to reassymble my engine and i need to get head gaskets. the block has been bored .030, and i am wondering if i should get the head gaskets that are made for that or if a stock bore gasket will work. i only ask because i can get a compleat engine rebuild set with head gaskets...
  20. bigsexxy422

    whats the biggest cam in a stock 302

    i am trying to pull the trigger on a cam selection and i am wondering what the biggest cam is you can run on a stock 302 lower end. the car is carbed so i dont have to worry about messing around with a computer, and lets just say it is with the stock heads out of an 89 gt.
Top Bottom
Back
Forums
Menu