Search results

I installed a cobra intake(original) about 3 weeks ago. The car works good but I could smell something inside the car and then today I let someone else drive it so I could follow and see if it smokeing and it smokes constantly especially on decel. I used all new gaskets, RTV sealant on the fron...

Just recently installed a Cobra intake, 65mm tb, ud pulleys, and I put it on the dyno to see what I gained and at WOT the my AFR was just over 12:1. My car is otherwise stock with exhaust, just wondering if all these cars run rich or if there is something I can do to lean it out alittle.

My friend has a set of AFR 165's and the block off plate on the back of the head fell off. just wondering where he could find one. Thanks for any help.

I just put a original cobra intake on my car and deleted the smog pump. Now I have a really bad exhaust smell inside my car, and today when I came to a stop sign I seen some blue smoke come out of my exhaust. Anybody have any ideas. Any help is apreciated.

My friend just had his 93 coupe dynotuned by Ryan at Stumps garage in Pine Grove Pa. Has a 306 with BBK SSI intake, 24# injectors, TFS stage 1 cam, ported E7s and all supporting mods, with dynotune made 273hp and 310tq. i was very suprised at the numbers, car is very strong now. Also the car...

Thinking of going 351, besides the lower intake, fuel rails, headers, does the A/C, alt, powersteering all bolt up the same? Thanks for any help

I will be ordering my 130amp alternator today and would also like to do a electric fan also. Could you guys recommend one for me. I am getting the alternator for Late Model Restoration and they have a Moshimito dual fan set up for 200 bucks. Does anyone use one of these. Thanks for any help

Just wondering if anyone has used this and what there thought were on it. Seems like a cheap easy way to do a conversion.

My goal is to build a 400rwhp motor but I am a little worried about the stock block, Are the Mexican blocks that much stronger than a stock block, where would I be able to find and what is a good price? What all has to be changed to use a Mexican block? Thanks for any Help

Getting ready to install Cobra intake and new throttle body, will the bolts from my factory intake work with the cobra or should i get a new bolt kit?? Thanks for any help

When I push the lock switch only the passanger side door locks. And is the same way if I use the passanger side switich. Would this be the accuator? Thanks for any help

Hey guys just got back from the dyno, wanted to get some baseline number. 1989 GT, Shory headers, Dr. Gas X pipe, Flowmaster catback, cold air kit, timing bump. 198hp 278tq.

Hey guys this is my first post just getting back into the mustang thing, bought a bolt on 89GT [gears,exhaust]. I plan on buying a topend kit from Anderson motosports for the stock block this winter, and hoping to hit 300rwhp. That should hold me over for a couple of years. But will...