Search results

All items listed are negotiable , contact me at 317-374-8668 text or call,

Lowered Prices !!! I'm selling parts I removed at 35,000 original miles for upgrade done a few years ago, Upper/lower intake, throttle body, timing set, valve covers , 19lb fuel injectors, rocker arms/ with hardware. New Cobra valve covers, 3:08 rear end gears Call Me // Scott , Indianapolis In...

i have the original 3:08 gears removed at 35,000 original miles replaced with 3:73, positraction if that makes a difference, also Stock shifter Indianapolis In , 317-374-8668, text or call $ 75.00 gears $ 35.00 shifter

i used prestone radiator cleaner in my 95 mustang engine , it has aluminum radiator, aluminum heads, I was having overheating issues and used the predtone cleaner, The instructions said to leave it in for a few days but I left it in for two weeks , then drained and flyshed with clean water. Now...

UpDATE Delayed response: I'm still dealing with the results of a poor engine builder. After months of complaining , they agreed to rebuild the engine, This time changed to KB pistons , comp c 224/232 duration: ported the Eldebrock performer heads, When I started the new engine it ran very rough...

Im still fighting with the shop that built my engine, they rebuilt it again and ported the eldebrock heads, K B pistons, different comp cam. I next took it to back to the dyno shop that had done a diablo chip. He said he could modify the tune , but it did'nt help much. showed 270 RWHP. After...

I'm trying to figure out which fuse controls the odometer. A few years ago this fuse blew and the odometer stopped working, along with some other things, trying to determine if in the box under hood or in side. This is in a 95 gt thanks, Scott

e-mail works the same way, they sell addresses based on what you have searched for or recentely purchased, of course most of it ends up in your spam folder.Google has it all figured out. Scott

Thanks so much, now I now where to start , should be interesting to take apart the steering column. scott

can you tell me what a clock spring is ?

I drove about 1000 miles to florida using the speed control and when started the return trip it stopped working Ive checked fuses and dont know the next step to find the problem , any thoughts? Thanks, scott

Cars and coffee, Hi, I,m a mustang owner and curious if this meeting is year round or a summer thing ThanKs, Scott

Gain 100HP My 95 vert is finally finished, runs good, but not as good as it should. After dealing with a deceptive engine shop another shop fixed some of the mistakes and finished tuning . Ended up at about 250 rwhp with over $12,000 spent The first mistake was allowing the engine shop to...

I have a similiar set-up on my 95 GT vert 306, eldebrock peformer intake-heads, comp cam-mild, 70mm TB BBK, 1.6 r rockers, shorty headers, 3.73 rear, BBK xpipe and mag-cat-back.24ib injectors FMS.BBK cold air. I installed a pro-m 24 after the other mods then took the car for tuning. My tuner...

gain 100 hp Well, thanks to everyone for the advice I'm nearing the end of my project and have found a shop thats much more experienced with mustangs. I have the car being tuned now and deciding which MAFto use The tuner likes the stock vs. the Pro-m meter Ive installed saying he can get a...

gain 100 hp Well, thanks to everyone for the advice I'm nearing the end of my project and have found a shop thats much more experienced with mustangs. I have the car being tuned now and deciding which MAFto use The tuner likes the stock vs. the Pro-m meter Ive installed saying he can get a...

still dealing with re-build The owner agreed to free labor with me buying parts.So far we've installed eldebrock heads, intake, roller rockers, MAF 19llb set-up, bbk throttle body 70 mm, comp cam-270HR/ 544lift. bbk shory headers, magnaflow exhaust. Now trying to find the right valve covers...

100 hp gain As far as I can tell the rebuild was nothing special except for the boring .030, over ,installed a mild comp cam.I know pistons were changed,he re-used the crankshaft, said it was OK ? I took the car to this shop because Ive known the owner since H.S. [40yrs]He builds super stock...

I have a stock 95 gt 5 speed with 30,000 original mi. took it to a well known engine builder/machineshop and asked the best way to add about 100 hp I was told not to use bolt ons but to rebuild engine with new comp. cam,,bored .030 over, bbk headers.Trusting the judgement of the shop this was...