Search results

I would recommend our billet steel flywheel 463100 and a Street Extreme Clutch kit 75307. Give me a call at 714-630-2764 x 223 and I'll be happy to answer any clutch and flywheel questions you may have. Kind Regards,

I agree with squeak93 the TR-3650 has more aftermarket support over the T-45. I would recommend keeping both and using the T-45 as a backup and then having the 3650 gone through and upgraded, Tony at Astro Performance https://www.astroperformance.com/ has a nice setup for those transmissions. We...

Being a clutch manufacture i'm obviously a little biased, but here is a site I found that gives pros and cons on both sides of the topic. http://manualversusautomatic.com/

(PLACENTIA, CA)- McLeod is collaborating with Raybestos Powertrain to bring a premier line of Performance Automatic Rebuild Kits to the performance enthusiast. McLeod by Raybestos Performance Automatic Rebuild Kits will be available exclusively through McLeod’s extensive list of distributors...

Thank You for your support of McLeod Racing. Yes the Chromoly Flywheel will accept any 2005-Up 11" pressure plate. I would highly suggest before installing the clutch to have the flywheel resurfaced to give the flywheel some texture to help the disc seat properly. If your still in the market for...

Bring your McLeod Equipped Stang to the NMRA Norwalk Ohio Race for a chance to win a bounty or gift certificate. http://www.nmradigital.com/2013/03/1...norwalk-event/ McLeod will highlight those racers in the True Street Competition that race using stick shift cars. The NMRA will offer...

DESCRIPTION: 2005-UP FORD MUSTANG HYDRAULIC LINE & BLEEDER. McLeod Racing has brought you another 1st in innovation with the introduction of our new Hi-flow A.N.-4 Stainless Steel Braided Hydraulic Line assembly and bleeder elbow. This new assembly with allow all 2005-Up S197 Ford Mustangs...

Good Luck. Because the 3650 has a intergraded Bellhousing it would be very expensive to develop a housing to take the place of the OEM unit. Most people that race their stangs and have a legitimate use for a scatter shield either go to a built T-5 or a TKO 500 or 600. At that point there are...

Honestly with that kind of torque down low I would suggest the next unit up the RXT twin disc for your application. Make sure to watch our new how to video listed at the bottom of the our original post.

The RST Street Twin Clutch Assembly is the economical solution to high horsepower street engines. The RST can handle up to 800hp while still maintaining a stock pedal effort. Since this assembly adapts to most applications there is no need to purchase a new flywheel, which considerably lowers...

We offer a kit for your car, P/N 75105 which is good up to 300 hp. We also have a kit P/N 75205 which is good to 500 hp. Each kit comes with a 10.5" pressure plate, disc, throw out bearing,pilot bearing and pilot tool.

Your thinking is pretty much right on. Those guys are running sintered iron discs that get grabbier as they heat up. The more heat you put in them the better they work and are essentially throw away after 1-2 races.

1. There are always potential for chatter on a dual friction style disc, due to several variables like power,weight,size of tire,rear gearing and the ability for the driver to under power the clutch. The more throttle you give the car the better the engagement should be. 2. Our pressure plate...

DESCRIPTION: 1979-2004 Ford Mustang Hydraulic Conversion Kit McLeod Racing has just released a new hydraulic master cylinder kit that easily converts the Mustang stock cable clutch linkage to hydraulic linkage. Key Benefits: • Softer Pedal effort = more manageable and smoother clutch...

Anybody that is in the market for one of these kits, here is our new how to install and bleed video. McLeodTV : 1979 to 2004 Mustang Clutch Hydraulic Conversion Kit

We offer the Super Street Pro P/N 75205 that is good for 500HP. This kit comes complete with a pressure plate, dual friction disc, throw out bearing,pilot bearing and pilot tool. If you have any questions please feel free to ask.

You would be better served going through one of the many great dealers on this site for best pricing.

Our Super Street Pro is offered as a complete clutch kit for the 1979-98 mustangs that is rated to 500HP. The kit comes with a 10.5" pressure plate,dual friction disc,throw out bearing,pilot bearing and pilot tool. Part number is a 75205. If you have any questions please feel free to ask.

Gene Wilson's yellow notch is the gold standard on how to mini tub a fox. That thing is clean.

The '99 Model GT has a 10.5" clutch with a 1-1/16 x 10 input shaft. We offer a stock replacement kit for your application that includes the pressure plate,disc,throw out bearing,pilot bearing and pilot tool the P/N will be 75103. This kit is good to 300hp, if your looking for a clutch that can...