Search results

  1. JasinC19

    Fuel 1993 - Need size of nylon OEM fuel lines please

    Hey guys, this is for my 93 GT 5spd. What size(s) are the nylon lines connecting the hard fuel lines running up the car to the hard lines going to the fuel rail? Are they both 5/16? It sure seems like it from my measurements... The fittings are different sizes, but the nylon lines seem the...
  2. JasinC19

    Electrical Air Bag Code 34 - So Close...

    Update: I tried plugging my airbag simulator into the vehicle wiring harness at the base of the steering column, thus eliminating the clockspring AND the airbag from the test. The resistance of the air bag simulator is 2 ohms, which is what the diagnostic monitor is expecting. Code 34...
  3. JasinC19

    Electrical Air Bag Code 34 - So Close...

    Thanks for your reply. I used that link as a reference to the 1993 Mustang Ford Service Manual procedure that I followed, since it looked to be basically the same... I'm still struggling with code 34... I'm fighting the urge to drop the money for a new clockspring, although my tests say mine is...
  4. JasinC19

    Electrical Air Bag Code 34 - So Close...

    Does anyone happen to have a picture of the black airbag connector pins, or have their dash torn apart enough to be able to take one?
  5. JasinC19

    Electrical Air Bag Code 34 - So Close...

    I've been struggling with air bag code 34. I have followed the service manual procedure here: http://ww2.justanswer.com/uploads/AP/apjp02/2012-09-09_031945_code_34.pdf Assuming a good air bag module, the possible culprits are - short between circuit 614 and 615 - bad clock spring - bad air...
  6. JasinC19

    Electrical Car Dies When I Move Eec

    Thanks! Got a chance to look at it more tonight. I did the wiggle test on the relay and it did not seem to have any effect. I cleaned the EEC pins and it seems to have all but cleared up the issue. It does slightly miss when I "vigorously" move eec around. I will clean it better when I have...
  7. JasinC19

    Electrical Car Dies When I Move Eec

    1993 Mustang GT 5 speed, a3m eec I have my EEC sitting on the passenger floor mat to diagnose this issue. When I move the EEC, especially go to turn it upside down, the car begins to die. I quickly flip it back right side up and it smooths out. When the car sputters, it throws code 66 and...
  8. JasinC19

    SOLD Bbk Catless H-pipe For Fox Mustang - $125

    Location: Norfolk, Va I am selling 1986-93 FORD MUSTANG 5.0 BBK OFF ROAD H-PIPE FOR SHORTY HEADERS - 2.5" - FOX BODY. Test fitted to car, but never fully installed. Had to go with catted pipes. Included is what you see in picture...
  9. JasinC19

    Expired 19lb Mustang 5.0 Fox Body Fuel Injectors - Never Used!

    Location: Norfolk, VA Paid 180 to Precision Auto Injectors - never used - upgraded fuel system before I installed them. They were professionally rebuild injectors - still in packaging from Precision Auto Injectors. Looking for $100
  10. JasinC19

    SOLD Bbk Fuel Rail

    City: Norfolk, VA Test fitted on rebuilt engine, but would not clear my new intake manifold. Comes with all hardware as seen in picture. http://www.latemodelrestoration.com/item/BBK-5010/86-93-Mustang-50L-BBK-High-FLow-Aluminum-Fuel-Rails $160 obo
  11. JasinC19

    Im Gasket Wet With Gas

    I will try that. Could this also cause improper fuel pressure?
  12. JasinC19

    Im Gasket Wet With Gas

    Started car for enough time to move it into driveway. Pulled upper intake. Reeked of gas. Gasket was moist with fuel. How rich should this puppy be at first start up? Wet rich? Lol. 24lb injectors with custom tune and pro m maf calibrated. Mpg is prerty horrible...
  13. JasinC19

    Is Anyone Running A Stack Racing Tb?

    You are probably right. I have been trying to find the cause of my crappy running condition after TFS top end kit. After paying 2 shops to not be able to find the issue, I'm just trying to fix things that I know are wrong. The BBK whistles a lot, and the IAC ports don't even come close to...
  14. JasinC19

    Is Anyone Running A Stack Racing Tb?

    Has anyone had any experience with an SR (Stack Racing) throttle body from American Muscle? Not sure who makes them, but I was thinking of replacing my BBK with one. They are on sale right now. http://www.americanmuscle.com/sr-75mm-tb-8693.html
  15. JasinC19

    Engine Bent Valves! Rebuilding. General Questions.

    Are you sure the torque setting on the head bolts is 100 ft/lbs? I had a recent issue with this. The correct torque spec was actually 70 for my bolts. (ARP set: 1/2 inch heads, 7/16 bolt)
  16. JasinC19

    Engine Mechanic Says Sticking Valve Guides

    I honestly don't know either. I really did accidentally Jack the front of the car up with the engine Crane during the first install. .. I ruined a motor Mount in the process... Could have been that I guess. I could watch the head of the bolt kind of wobble as it turned in the hole though...
  17. JasinC19

    Engine Mechanic Says Sticking Valve Guides

    I there's a way to do something twice I'll find it...
  18. JasinC19

    Engine Mechanic Says Sticking Valve Guides

    It turns out some of the top bolts were actually slightly bent... I can only guess that this happened during the initial install a year ago. Probably when my engine snagged on the frame while pulling it out to reposition it and I unknowingly jacked the car up with the engine. (The crane was...
  19. JasinC19

    Engine Mechanic Says Sticking Valve Guides

    Another question: When putting the passenger head on I keep noticing that when the bolts get further down in the hole, they hit like a 'rough spot' during part of the turn. I notice that the head moves a mm or two when the bolts are loose, I suppose due to a dowel maybe not being a really tight...