Search results

  1. JordanB21

    Dead Gauge Cluster. Bad Ground?

    Do you ever hear 3 beeps when you turn the car on? (means a light bulb is out) The ground to chassis to -battery pos if not intact entirely will cause no reads too
  2. JordanB21

    Window Stop Brackets?

    As pictured. Does anyone make a high quality replacement that isn't used with glue? I rather have a solution rather than a temporary fix till the next time it breaks loose again (thanks ford).
  3. JordanB21

    Interior Swap W/questions

    Door panels! One door panel has a partially broken hook that I need to fix and both door panels are lifting a little bit where the arm rest is so I'll need to find some adhesive to secure it down. The foam inserts on the back side are new and hopefully cut down on some road noise. I found...
  4. JordanB21

    Interior Swap W/questions

    You can see the door panel has begun to peel and what you can't see is that only two hooks holding the door panel are still intact, the lower portion of the door panel flaps. This shows the missing trim, messed up passenger vent, holes in the driver seat, worn carpet, and the mixmatched color...
  5. JordanB21

    Interior Swap W/questions

    awesome write up! Very useful and it came out great. Makes me even more excited. Sounds easy enough, and more good news there. I'm sure I can find the paint code somewhere, I've seen it in the past but I was just hoping someone had the info on hand. Well I'll have to find my portable dremel...
  6. JordanB21

    Interior Swap W/questions

    I'm going to be performing an interior swap (it has been on my wish list for the last two years). My current interior is gray/black, rattles like a snake, and is broken everywhere (pictures later). I've spent a day at the junk yard and while doing it I started running into a bunch of questions...
  7. JordanB21

    Curb Accident Pushed Suspension Back

    YES, yes it does. If it's the k-member for sure, then I'll probably go with a kit like that. Down side being that I would have to save for the kit and labor costs (like a month or tax return, lol). Labor costs, because the most I could do on my own are a-arms, control arms, coil overs, spindles...
  8. JordanB21

    Curb Accident Pushed Suspension Back

    I began to measure the k-members position like you recommended and I couldn't come up with a ton of measurements before I had to send it off to the shop for the transmission swap. But from what I could tell the k-member might be misaligned....not anything really uncovered there. But from the...
  9. JordanB21

    Engine Opening A Can Of 351w

    All three intakes, the cobra intake, gt40 tubular, and explorer intake have the same flow. People only pick which one they like for the looks! Best I could suggest for your gt40 based build is one of two options, either do a full port job on the heads and intake and/or (one that I also wanted...
  10. JordanB21

    Drivetrain Aod(e) Transmission-should I Do Myself?

    If I didn't already have this aode and didn't get it for a steal of a price then believe me, I would be going t5. If this transmission fails me, or rather, when it does, then I'll be going t5 and I defiantly will be doing that swap myself (gotta learn somewhere). As for how I ended up deciding...
  11. JordanB21

    Engine Opening A Can Of 351w

    yeah no problem. A while ago I had a similar idea to do a build where I was going to use that tubular gt40 intake, gt40 heads, and those older finned valve covers that say "powered by ford" on them. overall sourcing parts from an f-150, explorer, and fox body to go onto my sn95. But I've been...
  12. JordanB21

    Engine Opening A Can Of 351w

    I see where you're going with your build, I'd still look into some other ford production heads. Maybe a set of ford inspired redesigned gt40s? I don't even remember what they're called anymore, but I think gt40x? or something.. and another thought to keep it within the what if ford did this...
  13. JordanB21

    Drivetrain Aod(e) Transmission-should I Do Myself?

    and here's a few pictures to make this thread more interesting. everyone likes pictures.
  14. JordanB21

    Drivetrain Aod(e) Transmission-should I Do Myself?

    To start off, my 95 mustang GT has suffered a few injuries. The loss of my 4th gear being one, so I bought a transmission locally! Supposedly it has 55,000 original miles on it, and it looks pretty clean, but all I need it to do is run. The pathetic part is, this happened while spinning at 5300...
  15. JordanB21

    Curb Accident Pushed Suspension Back

    Sorry for the extremely late reply, but I've been kind of busy. :p Anyways, here are the pictures. The wheel is set back pretty far The spindle and a-arm (along with k-member) look fine to me, control arm looks questionable, but you guys are the experts so whats say you all now? :D Can't wait...
  16. JordanB21

    Curb Accident Pushed Suspension Back

    The tire rubs the rear of the wheel well and I'm not sure which parts I should be looking to replace so what all do I need? Mostly looking for a shopping list of recommend to replace while I'm in the area. The car still steers fine other than being misguided. Do you guys think the a-arm...
  17. JordanB21

    Build Thread "Rising from Ashes" 94 Cobra build thread

    The little rare goodies are starting to show;) Those Saleen covers, go 94-95 lights. No one seems to ever regret them, and they're special! And those side view mirrors! Fold ins?;) those must've cost a pretty penny.
  18. JordanB21

    95' Mustang

    I see your point Ron, there's plenty of options out there it's just we all have flowmasters, including myself. Which I wish I had something different.
  19. JordanB21

    Hard To Find 4 Bangers

    mostly crushed and neglected to the point of no return
  20. JordanB21

    What's New?

    I've been in and out, checking in, how is everyone? Put my 95 back on the road today again, lol. Alternator gave out, replaced it cheap, gave out again, and it melted the plastic guide piece on the back of the alternator along with destroy the 1/4 inch loop. So I pulled the alternator...