Search results

  1. gtblack02

    NEED Help from my fellow stangers!

    To make a long story short I was changing the fluid/filter in my transmission and when I was lowering the car with my hydraulic jack the teeth slipped and the jack caught the bottom of the oil pan. :bang: Now before you say anything, I know your suppose to jack the car from the notches on the...
  2. gtblack02

    NEED Help from my fellow stangers!

    I've got to drop the oil pan on my 02 mustang gt, what is the best way to do this? I've heard of two ways, drop the K member or try and raise the engine up (4 inches) until the pans comes free. This is my only car and a daily driver so I need to get it back on the road as quick as possible. Any...
  3. gtblack02

    POST THE BEST FAQ TECH THREADS IN HERE

    Here's a good link on Superchargers/turbos http://www.superchargeronline.com/index.asp
  4. gtblack02

    Tranny cooler

    Sorry guys here's the correct link http://store.summitracing.com/default.asp?target=partdetail.asp&part=BMM-70297&view=2047
  5. gtblack02

    Tranny cooler

    Does anybody have this cooler? If so did you have enough room in front of the radiator to install it there? Also thanks to everyone who helped me with the J Mod. The car shifts so much crisper, I love it, it has the same feeling as my 90 gt did with the transgo shift kit. Again thanks fellow...
  6. gtblack02

    For those of you who have done the Jerry mod

    YtnGT So to get this right before I drop my pan and start draing the fluid you guys took out the bottom spring on the 1-2 accumulator, (left the top spring in) and removed the bottom spring on the 2-3 accumulator. This is the only spring on the 2-3 accumulator right? (there is no top spring)...
  7. gtblack02

    For those of you who have done the Jerry mod

    Hey YtnGT, Have you done this mod because its definitely different from the one that you just increase the hole size on the seperator plates. These instructions say to replace the 1-2 accumulator piston and changing all the return springs. Does this come in a kit you buy because I'm not to sure...
  8. gtblack02

    For those of you who have done the Jerry mod

    Thanks YtnGT, :hail2: did you find those instructions on the site (www.tccoa.com) I looked for them everywhere and could not find them there. By the way do you like the J mod and have you had any problems since the mod? Thanks again
  9. gtblack02

    is it worth it?

    I think to get the best sound out of your aftermarket head deck you'll have to bypass the factory amps. I just rewired my whole car and ran moster speaker cable to all of my speakers from my panasonic, sounds awesome!
  10. gtblack02

    ok..now i am having troule with decision

    What ever you do take your time and make sure you get the one you want even if you need to save some more green. Here's a site that I ran across when I was searching for info on superchargers might help. http://www.superchargeronline.com/index.asp
  11. gtblack02

    For those of you who have done the Jerry mod

    Thanks for the info triggz
  12. gtblack02

    For those of you who have done the Jerry mod

    I've getting everything I need to do the mod from the website (www.tccoa.com) but as I was looking at the title to the instructions it says from 94-97 4R70W Thunderbirds. Now I know I have the same tranny (02 auto GT) but my question is has any of the hole sizes changed on the seperator plate...
  13. gtblack02

    Knocking noise on the GT

    I have a 02 gt automatic, lately I have been hearing a knocking noise it sounds like its coming from underneath the drivers side center console. It only happens when I start the car up and put it in reverse as soon as I go from reverse to drive it knocks. If I continue to drive the car around I...
  14. gtblack02

    Quality H pipe

    Has anybody tried the mac prochamber with the magnaflow CB? I'm not to sure how the box helps at the crossover point.
  15. gtblack02

    Quality H pipe

    I would like to get a mid pipe for my gt, will I benefit from an aftermarket H pipe withs cats or should I just leave the stock one on? I already have the magnaflow CB on order. Does anyone know where I can get a quality H pipe; not sure if magnaflow carries them, all I have seen is there X...
  16. gtblack02

    throttle body / plenum - which kind and which size

    Just installed the 70mm Accufab throttle body/plenum on my stock 02 gt, and love it, took about 20 minutes. I bought it from these guys they I got it to me in 4 days (overseas), good price to. $413.00 cut and paste to browser http://www.blueovalperformance.net/products.php?pg=2