Search results

If you were running a carb'd 347 with 750 DP proform carb, aluminum heads flowing around [email protected]", solid lift cam around .560" lift.... what intake would you use? I have a weind intake now, should I get a victor jr? whats the best carb intake for my motor? thanks guys:flag:

Where can I find one? Does anyone here custom make them? I'm looking for one to fit a 302ci with a Vortech S-trim. Would a muffler shop make one for cheap you think? thanks

buddy of mine has a 95 Cobra and he wants to rebuild his tranny. He wants to know if theres any websites, books, or anything to show him some teardown pictures. He says the cobra T5 might have some different bearing locations or something and he wants to be sure he does it right... anyone know a...

This is regarding my 2000 focus (I know this is 5.0tech, sorry). I can't find where to hook a code scanner to? I thought it would be around the fusebox under the dash and its not there. 3 guys at Autozone looked and couldn't find it either? I registered to a focus forums but it won't let me...

I'm about to get one and need to know what size I need. They come with pickup of -10, -8, -6 and -6, -8 for return. What sizes should I use for my combo? I'm installing a holley blue pump and all new fuel lines also. Thanks.

I have the motor setup in my sig. It was built last summer, but never driven that much until this month. We started off with the motor running on EFI with a A9L mass air conversion, #24 injectors, 255walbro pump, trick flow intake, Kirban AFPR set at 38-48 (tried several). When we first started...

Just wondering if anything ever goes on in the Kansas City area? clubs, shows, anything?

I have a few questions: *not my daily driver* setup in the sig. my heads flow around 230cfm intake also. -what carb would you suggest? -what spark plug gap should I use? I have all MSD ignition -what should my fuel pressure be set at, 6 or 7? -what brand of beer do you drink? :flag:

Do these headers take custom headers like the gt40-P heads? or do they take custom rockers or something? Thanks

buddy wants to know what spark plugs he should use on his 347 hes building. It has a Vortech SQ trim @14psi, TW heads, TF intake, Kenne Bell custom grind cam, #42 injectors(might go 50), and he has a new PMS to tune it. He also has MSD ignition. The compression of the motor is gonna be around...

I have the setup in my sig. We got the carb conversion and MSD install done today and took it out driving to see how the carb worked out. It ran fine with the holley 750 carb with H69 or 70 jets in, but it felt like it lost power going into 3rd gear and as rpms got around 3grand in 3rd it just...

my gf's dad put a new cd player in her grand am. When she turns the cd player off the right rear speaker hums really loud. like a real low bass, but bad. does it for about 6 sec right after she turns the cd player off. ground problem? right rear speaker wires + and - mixed up?

my buddy has a '95 mustang hes supercharging. Hes got a good deal on a maf from a lightning, but where do we get one of the wire adapters to use it on a mustang? Thanks

should I worry about static electricity here??? If I put a velcro strip in the fuel filler door to hold it shut, would I have to worry about static electricity igniting fuel vapors? my gf's fuel door won't shut all the way on her grand am, but I don't wanna catch her on fire though lol.

my buddy has a '95GT and hes got a vortech s trim coming. He wants to rebuild the 302 or put a 347 kit in.... hes looking at running 12-14psi though. What bottom end comonents should he look at getting? Also his compression is gonna be around 9.1:1 or lower. Should he do the 347 kit, and would...

my gf's grandam has this **** on her windshield that won't come off. its on the outside of the windshield, it looks kinda waxy, and won't come off with windex and I rubbed hard. I've read something about a "clay bar" on here, can I use this on the windshield? What would you suggest I try to...

Would some 17x9" 4lug cobra wheels fit my 2000 ZX3 focus Kona?

I cant get my TPS voltage to go under 2.80v with this Power Products throttle body. I use a voltmeter, red lead on orange wire, black lead on green wire, turn key on and check voltage. The lowest I can set it is 2.80v wtf? I just bought a new TPS in case the other was bad...same problem. Anyone...

I have the setup in my sig. once I drive it for a few minutes and come to a stop or push the clutch in it dies. It won't stay running if I push the clutch in. If I keep the gas pressed it will stay running. Sometimes (rarely) it will idle when I come to a stoplight. When it does that it idles at...

I'm about to do my mass air conversion and I have a pro flow 75mm chrome MAF setup for #24's. Pro flow's any good?