Search results

  1. MikeC

    03 Cobra drivetrain into 92 GT...Got a few questions

    I just bought a complete salvaged 03 Cobra and I’m going to do an engine/drive train/ dash/wiring harness/fuel system/brakes swap into my 92 GT. I’ve done some research but still have a few questions. 1) I’ve read that the 03 fuel tank will fit into the Fox. If anyone has done this, how did...
  2. MikeC

    Need to decrease my brake power...

    I used the stock booster with the 93 Cobra MC for several months. It was impossible to lock the wheels up. And I may never be able to get the 93 Cobra booster back out of the car, it did not want to go in there. I think I may be stuck because it looks like I want to different things...
  3. MikeC

    Need to decrease my brake power...

    I guess I didn't explain what I want very well. I want to change it so I have to apply more pressure to stop the car. Right now the weight of my foot on the pedal stops the car. It is like it's over boosted. Sometimes I forget and apply "normal" pressure on the pedal and it almost locks the...
  4. MikeC

    Need to decrease my brake power...

    I have the adjustable proportioning valve and have gutted the stock valve. I originally used the 93 Cobra MC with the stock booster and it was under powered so I put on the 93 Cobra booster and now it is overpowered. I believe the adjustable PV is set correctly. The rear locks up just after...
  5. MikeC

    Need to decrease my brake power...

    I have a pieced together M2300K kit on my 92 (Cobra brakes ft and rear). I have a 93 Cobra MC and booster. The brakes have too much power, very little pedal pressure is required to stop the car. I lightly touch the brakes and it stops. I don't want to change the booster to a smaller one because...
  6. MikeC

    Removing the fan blade?

    Loosen the fan to water pump pulley bolts before you remove the fan belt. Let the belt hold the pulley from spinning.
  7. MikeC

    Rear Control Arm opinions

    MM adjustable lowers, FMS uppers.
  8. MikeC

    Passenger side brake line adapter, 5 lug

    Weatherhead 7828 is what I used.
  9. MikeC

    Spark Plug wires

    Never hada problem with FMS wires, been using them for years.
  10. MikeC

    Check out my new tail light mod

    Probably not vandalism. I mean, if I were going to vandalize a car, I'm going to break windows, scratch the paint not just break the tail light lenses.
  11. MikeC

    where to find t5 clutch fork dust boot?

    Never seen a dust boot under there. Are you talking about the metal cover?
  12. MikeC

    Fox GT wheel pics

    Why is the antenna on the left side of the car?
  13. MikeC

    My headlights suck ace

    Did you realign the headlight after you installed them?
  14. MikeC

    Rant.... Wannabe mustang mechanics

    I think car only came with a 200 or 250 CID. ?????
  15. MikeC

    Rant.... Wannabe mustang mechanics

    Yeah, it was only available in trucks.
  16. MikeC

    Rant.... Wannabe mustang mechanics

    Ford called it a 5.0 because they already had a 4.9 L straight 6 cylinder engine. No confusion.
  17. MikeC

    Rant.... Wannabe mustang mechanics

    When I sold parts we would call the competitors and ask for thermostats. radiator hoses and water pumps for Volkswagon Bugs (the old ones) or for Corvairs. Or any part for a 1983 Corvette. Or left handed cresent wrenchs or metric screwdrivers.
  18. MikeC

    Lightweight Fog Light Mounting?

    I did not weight them, but it could not be more than 5 lbs lighter. Every little bit helps though. There has to be some way to support the bottom of the bumper cover, otherwise it would just sag. There are four bolts that go through the cover into the center brace. I like to see how it's...