Search results

  1. 94_302

    Door Sill Removal...Stupid I know

    I finished it up and as a bonus I cracked the case of the missing Ford assembly line workers gloves. They have been missing since 94 and it turns out my car stole them. :nonono:
  2. 94_302

    Door Sill Removal...Stupid I know

    Well I pulled straight up and some of the metal clips are stuck to the sill and some are stuck to the bottom. Oh well it's off.
  3. 94_302

    Door Sill Removal...Stupid I know

    I'm fixing the rear window motor and I've got the seats out but I can't for the life of me remember how to take the bottom door sill off. I need to take it off so I can get the rear interior trim panel off so I can get to the speakers. I know I did it 5 years or so ago on the rear drivers...
  4. 94_302

    Got My New 5.0

    Congrats! The car looks great. Nice choice with the silver, although it's no Laser Red.....:D
  5. 94_302

    are 99 cobra wheels worth anything?

    I'll try and take a pic of my car tom. I have the satins on mine. I paid $200 or $250 (I don't remember) for 4 that look basically brand new with svt center caps 20 gorilla locking lugs and nittos that lasted me a about 1,000 miles. They were off a 99 Cobra (Not ford racing or reproduction, I...
  6. 94_302

    MLP Sensor a.k.a Neutral Safety Switch

    Posted via Mobile Device I did not check the ohms. The notches did no line up though. I think moisture may have gotten in to the sensor as it was the original without the orange gasket which i read was the revised one.
  7. 94_302

    MLP Sensor a.k.a Neutral Safety Switch

    A while back I first had an issue that when driving on the highway the car would act like it downshifted, except it was on cruise control so it would maintain the same speed but at a much higher rev. I thought I would be looking at a new TQ Converter since I also had Shudder Issues. I put in a...
  8. 94_302

    94-95 > Any other Mustang in the 90's

    Well imo 60's and 94-95 are the best Mustangs. I'm just saying for all those mod motor guys and people who treat the 94-95's as the red headed step child.
  9. 94_302

    94-95 > Any other Mustang in the 90's

    Don't take my word for it take Ford's. Go to your local dealer and pick up an 08 Mustang Brochure. On the back they list a stang from each decade and representing the 90's is a 94-95, if you look really really close you can just make out that the tails are horizontal. More specifically I...
  10. 94_302

    ATF Fluid Level

    Yeah it's a stacked plate. I went for a drive on the road got on the highway for a moment and came back. Fluid was at the T on Hot so it's good. Next for the real test, a 6-7 hour drive tom. It probably needs to get some highway driving done anyways since it has sat in a garage for most of...
  11. 94_302

    ATF Fluid Level

    I just finished my tranny cooler install no leaks so I'm happy. Everything I read suggests you will need to install about a qt of ATF. So I started it and shifted it into neutral and it ran for about 3-4 minutes. B&M says let it run for a few minutes in neutral. I checked it and the fluid...
  12. 94_302

    Tranny Cooler Install Pics?

    Thanks for all the advice I went to a machine shop to see if they had it or could make it and he recommended what he did on his Ford. Just slide the hose over the line and clamp it down. He said that should do it since it's a low pressure line.
  13. 94_302

    Tranny Cooler Install Pics?

    Here is a pic of what I'm talking about, the space before the thread starts prevents me from threading in the fitting. This is the top return line:
  14. 94_302

    Tranny Cooler Install Pics?

    What I'm talking about is it looks like a little sleeve with threads that fits over the hard line. It can't be removed but it can slide around on the line. That has about an inch or so of space that is not threaded and when I try to put the brass fitting on that space bottoms out and I can't...
  15. 94_302

    Tranny Cooler Install Pics?

    Well the adapter that screws into the hard line is not deep enough. :mad: I guess I need to find a deeper one?
  16. 94_302

    Tranny Cooler Install Pics?

    This is a pic I found. http://www.allfordmustangs.com/techarticles/images/bmrad.JPG The metal line is the one that goes to the transmission correct? You attach the hose to it and run it through to one of the inlets in the tranny cooler. Then where the metal line was connected to the...
  17. 94_302

    Tranny Cooler Install Pics?

    Thanks, is the pic upside down? Right now I'm mounting with the inlets and outlets facing the hood. Also which one is the inlet and outlet on the cooler, or does it matter?
  18. 94_302

    Tranny Cooler Install Pics?

    Anyone have any pics of their tranny coolers installed?
  19. 94_302

    Not your typical TQ Converter question

    That would be great, I'm installing it tom. afternoon.
  20. 94_302

    Not your typical TQ Converter question

    If you could take some pics that would be great. That actually sounds like a great way to do it as well, do you have any pics? Sorry StinkinLincoln I already ordered it. Also any pics of the lines would be real helpful I just have this image of me having the wrong lines going in...
Top Bottom
Back
Forums
Menu