Search results

There's a Duraspark II ignition system in my 67 and I also replaced main front wire harness and all motor electrical wires. It has worked fine for 2 years but a couple weeks ago the car shut down while I was driving. I knew it was electrical and after a closer look I found some shoddy wiring and...

Recently put in 9" versailles with 3.73 gears and Truetrac. When slowing down under 25mph there is a clunking going on on the right side of the diff. There are no noises upon acceleration or at mid-high speed coasting. We put it up on the rack and idled in 1st gear and your hear a constant...

Last summer I put on the TCP rack & pinion with the KRC pump. At low idle like in the parking lot or turning the tires when stationary the pump groans and I could feel stuttering but seems fine when rolling down the road. I now have about 600 miles on the system but I took a close look under...

Looking for a quality al. rad with an integrated shroud & elec. fan combo for my buddy's 66 vert. Needs to be a direct bolt in, no mods. Thanks in advance for any advice or quality, cost effective sources.

I have two 67 stock floor shifter assemblies as I'm trying to piece together a correct one for my lower console. They both have a hogpodge of different nuts, washers and wrong bushings from prior rebuild attempts. I bought the two correct replacement bushings and I think I may have the...

Someone swapped out the rearend years back on my 67 FB and I'm trying to figure out what I have and if it's worth rebuilding to support the new stroker (450hp+) or get an actual nine somewhere. I have a couple pics but too big to post and the car is at the shop. The rear view of the housing...

Ordered a 331 stroker with all forged internals and AFR 185 heads. The builder will order the raw 185 heads and cnc them based on his own recipe. The engine will include the following: 5.0 roller block, 9.8/1 compresssion, RPM airgap intake, Demon 650 vac/sec, custom longtube 1 5/8 headers...

I have to pick out a paint color for my engine builder. Been searching the threads and looks like Plasti-kote #224 and Duplicolor DE1606 seem to be the "correct" Ford Dark Blue colors. I remember seeing someones engine on this formum and it looked like an awesome blue but I can't seem to find...

My 331 stroker will be one of the new 5.0 roller blocks with AFR 185 heads and a new AOD. I searched the forum/header chart and I'm still not sure. For headers that will clear, could I order the Hedman Elites (Hooker comps or?) for a 351W application like Edbert and Geostang? Does anyone know...

Getting ready to finally put in my dream powertrain, 331 stroker with an Art Carr AOD. The AOD will be the better (and of course more expensive) or newer? model with the auto/manual valve body the goes into overdrive via a simple switch that the driver can actuate anytime or not for increased...

Getting ready to upgrade the drivetrain with 351W or 347 (400+HP) stroker for mostly street performance and occasional driver. Doing research on AOD manufacturers, have heard of Lentech and Perfomance automatic. Also found TCI and Performance Automotive and Transmission Center. PATC offers...

I'm getting ready to completely redo the drivetrain, rebuilt 9" with disc's, 347 stroker and new AOD tranny. I have the deluxe interior with the stock lower console and auto trans in my 67 FB and would like to keep it. My question is, can put in an AOD and still keep the lower console?

My 67 has factory power brakes with front disks. The plan is to upgrade to 4 wheel disks down the road. In the meantime, my master cylinder appears to be leaking between it and the booster. I need to replace it asap but I would rather replace it with a master cylinder that will work for the...

I have seen some billet parking brake handles for 67-68 before but I have no idea who makes them. They are a great restomod addition for the weak oem ones, any ideas?

Recently replaced the whole rear suspension on the 67 FB. Prior to touching the car we measured the fenders to ground distance so we knew the as is and found that the car sags on the drivers side about 3/4". After changing out the rear springs the car still sags 3/4" on the whole drivers side...

Getting ready to put on the new wheels (Edelbrock 454's) on after leaf spring replacement next weekend. It's been years since I've purchased good wheels and I'm wondering what other modders are using for wheel locks. Back in the day I remenber buying a full set of (20) Gorilla locks for my...

I 'm ordering a new speedo gear today and trying to determine which gear is for my setup. I'm familiar with the gear selector formula but I'm not sure what number of drive teeth (tranny output shaft) to enter. I have no way of checking under my vehicle right now. My setup is this: 67...

Getting ready for a new 4.5 leaf and KYB Gas-a-just shock replacement on the 67 FB. I also wanted to get new shock/spring plates and powdercoat. Old ones have 35+years of grime and several layers of nasty undercoating. The only ones I have found at the usual suppliers (NPD, Mustangs Plus...

I have a 67 FB with the deluxe interior (brushed aluminum) on the dash. Prior to me it was updated with that crummy "brushed aluminum" sticker stuff applique. Don't waste your time or money, that stuff sucks and will eventually bubble like mine and look low budget. I'm going to do it right...