Search results

Anybody know of a cheaper place to get the ZEX perimiter plate kit for 4bbls? List on ZEX.com is $623.28. Thanks for any help.

Anybody know of a cheaper place to get the ZEX perimiter plate kit for 4bbls? List on ZEX.com is $623.28. Thanks for any help.

Anybody know of a reputable place to get a new front bumper for a 2000? Price is a concern, and I don't want a take off as the whole front end of the car will be getting repainted. Thanks alot.

I've got 80,000 miles on my 2000, and I badly need to change the front struts, my question for you is what is a good set of non-adjustables that are fairly priced and would be a good upgrade for my daily driver. What else should I change out while i'm up there just for maintanence purposes, my...

anybody know the cheapest place to get the weld alumastars? i know they aren't cheap at all but i'd like to save a few bucks if i could. thanks for any help.

The car i'm buying has got a 420 windsor with a powerglide behind it and since it is a gm tranny the speedo doesn't work. is there any type of adaptor or anything that will make it work in a ford gauge cluster? otherwise i will just have to keep my eye on the tach and guess at the speed which...

I'm working on my engine swap at the moment (carb'd 420 windsor) and I am in need of a 5" cowl hood so I can fit my 2" spacer and air cleaner underneath of it. A 4" would work but i'd either have to get rid of the spacer or get a shorter air cleaner. anyone know of a company that makes a 5" cowl...

After I finish my suspension im gonna start working on motor and i want to go with the victor intake, with afr 205's and a fti cam on my 347 project. My question is can you use the elbow for our cars like on the performer intake or do u have to switch to the fox body style air inlet stuff. it...

Thought i would post this if any of you have thought about running Mickey Thompson E/T Street Radials. They are awesome, ive got 275/50's on my vert with prostars and with bone stock suspension, have gotten 1.72 60' times, pretty impressive when compared to the 2.3-2.5 stock times I think...

I just got my 15X8 Weld Prostars put on this morning with 275/50/15 et street radials. need to know what psi to run them at on the street and at the dragstrip? also I ordered my 15X4 Prostars but one of them came in bent so I have to send it back. Will I have any problem bolting these up? I...

A friend of mine is looking to get a custom burnt chip to fix his tranny shift problems after he put in 3.90s in 95 aode gt. it hesitates between gears under full throttle, i think its bouncing off the rev limiter. so i figured he could get a chip to correct the problem, well come to find out...

What's up everybody? My friend installed 3.90 motive gears in his 95 gt aode, and he put in a 23 tooth speedo gear. Now under full throttle it shifts slow between 1st and 2nd and 2nd and 3rd, almost as if it is bouncing off the rev limiter. i was thinking that he needed to get a custom burnt...

Whats up guys? I'm trying to shed some more pounds from the vert, right now I have taken off that 25lb weight that is behind the foglight and i've lost the x-brace (so I could fit my L/T's). Now I need more ideas of weight reduction that won't kill driveability. I'm working on my suspension...

Drag race suspension help? I'm currently working on my suspension and here is what I have so far : Strange Adjustable Shocks & Struts Maximum Motorsports C/C Plates and Full Length Sub-frame connectors I'm debating between HP Mega Bite Upper And Lower control arms and Maximum Motorsports...

what is hp motorsports website? i have been searching all over for it and cannot find it. also what is the cheapest place to get a set of mega bite upper and lower rear control arms? thanks

I'm doing a 347 buildup with nitrous shortly and am curious as to how much a machineshop can really do to a set of 185's? i will also be running a edelbrock rpm 2 upper and lower with a custom cam. any help would be great.

The a/c in my 2000 isn't working right, the a/c and all of the hvac controls only work when it is put all the way on full blast. I put a new radio and shifter bezel in yesterday but can't see how i could have messed it up? Any help would be great, thanks.

I just put my Bassani Street Competition catback on yesterday with my lt's and shorty o/r h and noticed that the mufflers have the same type of baffling as the tips. It looks like it is just one bolt on the underside of the tailpipe that holds the baffling in place? if i unscrew it will the...

I just had my Lt's and everything put in yesterday in my vert and to get them to fit we had to remove the x-brace. do i really need it at all? i drove it home in the rain and couldn't really tell any difference in handling at all? would a set of subframes strengthen the car back up? i was...

What's up everyone? I just spent over a grand in the past 2 weeks on exhaust and haven't even gotten to put it on yet (tommorrow) and am already concerned about my next mods. In the next 6-8 months I plan on having a 347 stroker with afr 185's sitting in my car but for right now I am...