Search results

  1. 5 Liter Mustang

    86+ headers on 85 GT

    go to www.foureyedpride.com the people in the forums there can answer any question you have about this swap
  2. 5 Liter Mustang

    i have a coolant leak. help

    ya, i was going to ask if you saw any under the car where it was parked. when i got my 224k mile notch, it had a leak behind the timing cover, in a heater bypass hose, both heater core hoses were punctured, and the pipe that runs from the heater core hoses to the front of the block was rusted...
  3. 5 Liter Mustang

    So Cal 5.0 performance parts dealers???

    i doubt they have it, but you can check with brothers performance
  4. 5 Liter Mustang

    SN95 Rear for disc/5lug conversion?

    so do i have to used the SN95 Master Cylinder no matter what? And if i choose to use the master cylinder and proportioning valve out of the SN95, do i use the brake lines from the sn95 too? thanks for the response
  5. 5 Liter Mustang

    SN95 Rear for disc/5lug conversion?

    Has anyone used a complete SN95 rear for disc/5lug conversion? What is involved in this swap, and does the rear have to be Non-ABS? Also, how much wider is the SN95 rear?
  6. 5 Liter Mustang

    sn-95 h pipe on fox body

    you dont even really need a lift. i did it on jackstands :( a lift would definitely make it easy though
  7. 5 Liter Mustang

    What size socket/wrench for the oil pan bolt?

    im pretty sure its 9/16 6 point. maybe your using metric. In that case, 14mm might work. You dont need a socke, an open or box wrench would work.
  8. 5 Liter Mustang

    sn-95 h pipe on fox body

    i just cut the metal hangers off the h-pipe, slid them in the tranny hanger, and welded them to the h-pipe in the new location. You dont really need them, but just in case...
  9. 5 Liter Mustang

    Tell me if my problem is with the TOB or release bearing...

    I think the Throw-Out Bearing and the Release Bearing are the same thing? Maybe you meant TOB and Pilot Bearing... usually the TOB will squeek when it starts to go bad
  10. 5 Liter Mustang

    93 Cobra Intake

    i would also consider an explorer upper/lower. The lower is the same, but i heard the upper doesn't flow quiet as well as the Cobra, but you can definitely find them for a lot cheaper (used)
  11. 5 Liter Mustang

    anyone ever seen a balancer crack???pics

    i agree with 10hole. when you used the puller, maybe you forgot to put the bolt back in the crank to protect the threads.
  12. 5 Liter Mustang

    Help me get header bolt off head...stripped bolt?

    a long ass breaker bar or "cheater" bar :(
  13. 5 Liter Mustang

    90 7UP vert-any idea of value?

    well.. mine isn't that good. It LOOKS good, but when i bought it, it had a small hit on the front that bent the core support a little. I fixed it all using aftermarket parts (a HUGE mistake) and after that the hood and front bumper cover dont align well at all. And the car has 130k miles and the...
  14. 5 Liter Mustang

    MY CAR MADE THE 50RESTO HOMEPAGE!!

    where can i see more pics of that car? i love it
  15. 5 Liter Mustang

    H/C/I done!!

    that cam definitely idles a little rough anyways.. awesome combo, if you dont mind me asking, how much did the whole ordeal set you back?
  16. 5 Liter Mustang

    T5 Swap Question... Please Help

    Can anyone show me a pic of the T5 tranny harness or describe it/where it goes. Will an 83 GT 5-speed have the tranny harness that i need? I basically finished everything up, except the tranny harness, but the car wont start. I plugged in the nuetral safety switch on the pedal assembly, and...
  17. 5 Liter Mustang

    Cleaning out head bolt threads...

    i would recomend running the correct tap through them to get all the dirt out from between the threads, and then blowing them out with compressed air.
  18. 5 Liter Mustang

    remodeling interior?

    It did come stock, but it was rather rare. Your best bet is to find a parts car, because buying all the parts seperate will kill your budget. good luck
  19. 5 Liter Mustang

    Can I beat my buddy?

    basically, to sum up what everyone has said. if he can drive, you will lose.
  20. 5 Liter Mustang

    Help with excessive shifter vibration

    you can reuse the AOD crossmember, but its not a direct bolt on fit. You do have to grind it and beat on it a little, its overall a pain in the ass. I'm converting my notch to 5spd and after a day of messing with the aod crossmember, i decided to go to the junkyard and got a dual hump t5...
Top Bottom
Back
Forums
Menu