Search results

I just wanted to ask if any of you all one here had any opinions on these cars I did some reading up but on them but your opinions would be appreciated. I ask because I have a chance to buy on from a relative for a bout 3x less than they paid and from looks alone it sure looks like a pretty...

I was just wondering if a 2.5" catback will bolt right up to the stock h pipe on my 86gt or if not what needs to be done to make it work. And would adding an offroad H make much of an improvement over stock.....would I feel the change?

I was wondering if anyone had any info on those gizmos that look like a little power inverter that you hook up to your car that emits an electrical current that is supposed to prevent rust and protect the entire body and chassis from rust. I have only seen them advertised in canadian tire and it...

I was just looking for an answer. The question...... I understand about the negative issues with the 86gt engine and have a 85 gt engine also. Would it be worth the effort to swap the bootom end of the 86 for the 85 keeping the heads on the 85 and putting the FI and stuff on the 85. So basically...

As I posted a while back I am the new owner of a 1986 gt. The car is all stock and I bought it to replace my project 85 gt that due to rust issues I have decided it is better to either sell or use it for parts. Anyway I have done my homework when it comes to the 79-93 Mustangs over the last few...

Well I had a pretty good month of overtime at work so I picked up a new ride. It is bone stock 5 speed white with blah..I mean burgundy interior certified and emissions tested 1 owner (a lady) since new, stored for last six years with 130 000 miles. I think I lucked out for a change. I was just...

Hello fellow Canadian Stang Lovers, I am from Hamilton Ontario, and am trying to get a little business started Pro Streeting Fox bodied Stangs. I have my 85 gt about 80% done and I am starting on a 87 LX soon after. I have tons of parts and tons of knowledge about Mustangs and am trying to...

I cannot figure out how to post in the for sale section so for fear of "reprisal" I will say I am the proud owner of the above mentioned car that has severe frame rot and most of the front end chassis has been taken from the car and I got it for the 3.73's and the carpet. All the rest of the...

I am A 5.0 guy, but need to know if, like there bigger badder brothers, did the 86 and ups get a 8.8 rearend? If not what is the gearing on those cars? (Automatics)I know the smaller cars gearing is better and am wondering if I should swap my stock to the 86LX and later when I find a 8.8 change...

Iwas just wondering about the aluminum parts on my car the valve covers, alt bracket, alt, and belt adjuster, power steering bracket, waterpump, bottom of distributor, thermostat neck, intake(obviously), most of fuel pump, and the rack and pinion steering thing is aluminum. Do all Mustangs of...

Anyone have any details on a 6 point roll bar for a fox?....the actual dimensions. I want to fabricate one and any help would really be appreciated to make the process easier.

Fibreglass Ram Air hood...... I got one of these hoods but it is for 87+. Could this be cut to fit my 85? I know the lip in the front is not the same and around the top of the lights seems a bit off, I see there seems like there would be a problem near the cowl I do not think it would fit with...

Can someone tell me quick how they come off? I do not want to waste time if I do not have to , or break them if they are attached from inside. Please help asap.

Is Slick 50 power steering fluid any better than normal fluid and would fill it with all slick 50 or use it to top up when low. It is on sale for 1.99 a bottle and I am wondering if I should get some that is cheaper than normal fluid so I wonder if there are any advantages or if it is as good as...

What would I need to do to install this engine in my 85gt? I have a chance to pick up a "modified" 351, for very cheap, complete with an engine stand. I have yet to see the motor what should I look for? What years are better etc or #'s would be ideal? Will a stock T5 bolt right up? Would it...

If my car has no air, no power options and I run underdrive pullies with an electric fan with no HD stereo would my stock alt be ok? I will get a 3g but want to wait for a junkyard or super deal. Will it work for a while? I would leave the stock alt pulley but I heard that partially defeats the...

I have heard conflicting stories about the Aerostar aluminum ones. Some say they bolt right up, others say they need to be cut, others say just new U joints are needed to fit the stangs. My car is standard the driveshaft I can get cheap is from a 91 van. Does anyone know for sure what will work?

Can anyone tell me of any rads from any other cars that are bigger and can easily be adapted to fit in my 85gt. I want to try to avoid paying for a new aftermarket rad if possible, and know there must be stock ones from other ford cars that will work. Can anyone help with suggestions?

Can anyone tell me what a 1990 block,upper and lower intake and heads are worth? Do damage I assume, there is an add in local news..Best Offer....I want the heads for sure....but what should I offer?

I have the catted one in very good shape, they are not required now and I am wanting to get a offroad X. Is anyone willing to buy or trade with cash? the catted id $400 American off road much cheaper almost half. I cannot figure out the classifieds so I posted here...sorry Mr.Moderator. The...