Search results

  1. S

    Question on Holley Systemax intake

    I was reading somewhere about the Holley intake and it sounded like you had to re-locate the EGR. Is this the case or does it use the standard EGR plate? Thanks, Dave
  2. S

    Car wont idle-injector help please

    I checked for vacuum leaks, I dont think there are any but it is hard to tell when it doesnt idle.
  3. S

    Car wont idle-injector help please

    Yes I set the voltage.
  4. S

    Car wont idle-injector help please

    I just installed a BBK intake, headers, 70mm T/B, 24lb injectors, and matching MAF, now my car wont idle. Could the injectors be too big and causing it to die at idle? I find this hard to believe. Does anyone else have the BBK intake? I think it is the worst intake ever to install. The EGR...
  5. S

    Help with K-member on 91

    Hey Fox Racer, I have a set of calipers but no spindles or hubs. Let me know if you want to trade. Dave
  6. S

    Help with K-member on 91

    I have a 91 LX 5.0 5-speed. I have 94 front and rear disc brakes, rotors and spindles. What year k-member and lower control arms will I need? I don't know if the control arms are the same length on the 91 and the 94. I know the ball joints are different. Thanks, Dave
  7. S

    How to spend $1500-any suggestions?

    This motor is stock, the 347 is in my other Stang. Wouldn't quite be fair to run that against his motor.
  8. S

    MustangSally93-Got a Question

    I see you have "Mega Squirt", my buddy is looking to buy one, any comments on it, good or bad. I too am interested, but know very little about it. Thanks, Dave
  9. S

    How to spend $1500-any suggestions?

    This race is just between friends. I do have a 347 and a Vortech in my 93. Just looking to see what would be best for everyday driving and still beat him. If the cars are equal I will easily outdrive him. He just bought his car. I've had Mustangs since 85. It was the first one I ran NOS on...
  10. S

    anyone running victor jr's on a 347? what pushrod length

    I'm looking at running the same but I have a Vortech to go with it. No I don't know what pushrods to use either. Dave
  11. S

    How to spend $1500-any suggestions?

    Here is the whole deal. Me and my buddy bought stock 91 and 93 5.0's. His- 93 GT 5.0 5 speed Mine 91 LX 5.0 5-speed We want to see who will be faster at the track by spending $1800. His car- GT 5.0 5 speed with- Underdrive pulleys, BBK equal length headers, BBK-intake, E303 cam, 24#...
  12. S

    Need help with speedo gear

    I swapped out my pathetic 2.73 rear end for a 3.73 rear end. Can anyone tell me what speedo gears I need and where to buy them. Do I need both gears or just the gear on the cable? Car is a 91 5.0 LX 5-speed. Thanks, Dave
  13. S

    Question on sn95 axles

    If I use sn95 axles on my 91 for a rear disc conversion, isn't the track going to be wider than stock and by how much? Thanks, Dave
  14. S

    Rear disc brake caliper bracket

    Thats strange, because the Corvette Z06 uses aluminum brackets and I don't think they shear off too often.
  15. S

    Rear disc brake caliper bracket

    6061 has a higher tensile strength than the stamped steel Northcars is using. These are machined from one piece of solid aluminum, not bent into shape. Plenty of newer cars use aluminum brackets not to mention calipers.
  16. S

    Rear disc brake caliper bracket

    My friend owns a small machine shop and is making a set of rear disc brake caliper brackets for my 91 out of 6061 aluminum plate. He can make them for about $110 per set. I was sondering what you guys thought. I looked a North Racecars and they are $150. He says he can make them for either...
  17. S

    Short throw shifter

    Who makes a good short throw shifter? I've heard alot about moving the shifter back, but nothing about a short throw. Thanks, Dave
  18. S

    Questions for Fox owners with 5 lug 4 wheel disc

    I have a 91 5.0 and it is 4 lug. I have a set of 94 hubs, spindles, etc. for the front. I also have everything for the rear except for the axles. I want to run 9" Cobra R wheels. What axles do I need? Everyone says to check out this website,http://www.svo73mm.cjb.net/., but it makes no...
  19. S

    What bumper is this?

    Does anyone know who makes this front bumper and will it fit on my 01? http://www.allfordmustangs.com/photopost/showphoto.php/photo/21527 Thanks, Dave
  20. S

    10.5 Cobra R wheels on a 01?

    Do they make 10.5 Cobra R wheels and do they fit on an 01? There are so many different stories of them rubbing on the sub frame bolt. Coes any one have them on and what size tires are you running? Thanks, Dave
Top Bottom
Back
Forums
Menu