Search results

  1. D

    4.6 Question About Throttle Body Vacume

    This is a 04 grand marquis 4.6l same motor The throtttle body has 2 vacume lines on it,1 is about 1/2 inch closest to the end of t/b It goes into some type of selenoid on the pass side of fire wall w/a quick connect and turns into hard plastic tubing right there. Other wise its 1/2 inch rubber...
  2. D

    BELIEVE THE HYPE!!!!! Powerdyne Sucks

    They have an internal cog?
  3. D

    i STILL have vibration. harmonic balancer? PLEASE help me

    Well...think of it like this u changed the flywheel ,it helped,the balancer also helped..only thing left is the pres plate and clutch disc :) U get a vibe around 3500-4500 rpms and u can drive right thru it right? if u gun it,its barely noticable at all? u get it in nutral... u get...
  4. D

    i STILL have vibration. harmonic balancer? PLEASE help me

    take a peek...u got a burnt fly and pressure plate and an uneven worn clutch.=bad vibes...
  5. D

    BBK Longtubes FOX on a SN95 DONT!

    im runnin a fox style tko bell clutch fork is no where close to anything. an x pipe woulda been hell a lowered car also how did u bend the header to clear the shaft? I use an 03 shaft its got a little different design and has way cooler feel. Its a stiffer steering feel. the firewall...
  6. D

    How to adjust rear brakes? 95

    its like this on the lift....tires spinning i step on the brakes and nothing If i click the e brake up about 4 clicks and i step on the brakes they work great awsome wicked My ebrake works fine when its all the way up also the rear pistons are the screw in type.....they screw in when...
  7. D

    i STILL have vibration. harmonic balancer? PLEASE help me

    Of coarse hes not gonna admit he did a crap job. This is exactly what I went thru.Step by step but over a longer period of time.I wish there was someone like me.To tell me,so I didnt waste so much time. At...The time...:) So....are you gonna be cheap and get a wimpy clutch kit? Or try...
  8. D

    how important is the inspection plate????

    between block and bell. does it keep the inputshaft at a proper lentth into the pilot bearing? does it space so mcuh that the bolts wont keep the bell tight if u dont use it? this case its a tko..and it seems te trans is loose even tho the bell looks flush and bolts look and feel tiht. the...
  9. D

    how important is the inspection plate????

    Will the tranny still mount properly with out the inspection plate? My buddy threw his out and now were stuck w.out it.
  10. D

    i STILL have vibration. harmonic balancer? PLEASE help me

    pics...........tell me this...do the swirls look familiar? Heheheheeeee.... The reason you have the swirl marks,Like I had.Is because a CAPITAL A FOR *ssho**** used a brake lath to cut the flywheel.I believe? Just like mine. [/IMG]
  11. D

    i STILL have vibration. harmonic balancer? PLEASE help me

    Chiming in here. I also went thru this exact problem. My first major problem was the flywheel. Then the balancer cleaned it up a little more. I was being cheap and didnt wanna replace my 10k miles dual centerforce clutch setup since it was still working great. But sure as ****....and...
  12. D

    How to adjust rear brakes? 95

    got that all taken care of... bled the piss out of them several times. I read something back in the days about this also. I guess im gonnna have to play w/the ebrake cable on the calipers
  13. D

    How to adjust rear brakes? 95

    My rear brakes dont do squat unless I pull up my e brake and jam them hard. Someome told me its because there not adjusted right with the ebrake cable spring? or something Can someone tell me what s that about? the brakes are all new and should work.
  14. D

    BBK Longtubes FOX on a SN95 DONT!

    how did you kink the header by the shaft? I have the same problem.But..........I have poly mounts which lift the motor up about 3/4 of an inch at least. Also I shimmed my transmount up and helped raise the tubes away. But i need to move the trans back down and its like a hair away from the...
  15. D

    rear rebuilders or rear gurus help please

    I need some help diagnosing these symptoms Starts off as as awhine at high speed 70-80mhp but only when i let off the gas Going around around a huge turn the whine is pretty loud on or off the gas Jacking one rear tire up///I heard a click like the axle snapped outward a little ...as...
  16. D

    Driveline/Driveshaft masters only Doube cardan

    How much pinion angle will a doublecardan joint make up for in the rear? IM having a problem setting my pinion angle with only being able to move the tranny up/down..The driveshaft specialist put a double cardan on and IM still getting vibrations up top 80mph verry bad when i piish the clutch...
  17. D

    Serious problem w/tko Need opinions really bad

    Did you do an aode to 5spd swap? Loosen up the motor mounts and drill some side slots in the tran x member the exhaist has to be all loose also to get it to slide sideways. But....you may only need to cut the sheetmetal a little if thats your only problems? I had this fkn car up/down...
  18. D

    Camshaft change opinions on a stroker

    The g tech gives you 1/4 mile times it has a tree,1/8 trap speegs g force and rpms speed its pretty cool rpms also and more. They say that they are only 1/2 second off at the worst!But claim 1/8 on all their tests. But wo knows? When you get it,you need to sync it with your rpms at three...
  19. D

    Camshaft change opinions on a stroker

    My car is a street car..untill I put that motor in. Its transformed from then..its got a/c leather moon roof loaded w/it all. it was an auto I would have built a stroker if it permited at the time.But I was promised 400horses from this combo "already tried and true in another build"and I...
  20. D

    Camshaft change opinions on a stroker

    Definitly do the 410s Thats what I have and I cant imagine less than 410s That xe282hr cam in my combo is pretty wild.It shakes my car nice and it pulls for what seems like forever. IM only runnin 8deg of base timing "long story" but its wild like this and I know theres plenty more to be...
Top Bottom
Back
Forums
Menu