Search results

  1. B

    Boss Grill

    There is a close up here: http://www.autoblog.com/photos/galpin-boss-302-mustang/
  2. B

    Good Performance Shop in Houston???

    I have had good experience with Slaters in Humble with a previous stang. Haven't been out there with the new one yet. http://www.slaters-mustangs.com/
  3. B

    500hp what radiator fan

    any other suggestions?
  4. B

    Factory bent brake lines

    I was referring more to the bends. The factory bends are a lot tighter and look a lot better.
  5. B

    Factory bent brake lines

    Well, I have already done them myself. I had to move the ABS up to where the battery box is for my setup. All is fine with that, however, I am considering a slightly different setup if I can't solve my clearance issues with the radiator ran and would need to move it back down. And I already...
  6. B

    Factory bent brake lines

    Anyone know where I could purchase factory pre-bent brake lines for a '95 GT? I need all lines from the cylinder to the ABS and ABS to each wheel.
  7. B

    500hp what radiator fan

    I thought about using a big pusher, but I have gotten negative feedback on that as well. We are keeping the a/c, so the condenser is in front of the radiator and a pusher would probably have a tough time by itself.
  8. B

    500hp what radiator fan

    I am having real difficulty finding a radiator fan for my configuration. Brief recap on my setup - '95 GT, '93 5.0l block, Holley alluminum heads, w/ a Vortech V1 for the '93, Fluidyne, Texas heat, etc.... I have had to rearrange some things. I am having clearance issues between the Crank...
  9. B

    Vortech V1, Cooling Fan help

    We have a '95 GT that we are swapping motors in. The motor we have is a '93 5.0 that was stroked to a 327, fully built. It came with a Vortech V1 installed. We got a killer deal on this, that is why we purchased in instead of a '95 motor. We have already had to move the ABS box and brake lines...
  10. B

    GT40 heads?

    Ok, there are 3 hash marks on the end of the head, BUT it only says GT by the valve springs... Did I get screwed?
  11. B

    GT40 heads?

    I purchased a set of GT40 heads off of ebay recently. I got a pretty good deal on them, but when I recieved them, I am not sure how to tell if they are really GT40, or stock cobras? How can I tell the difference before I try to install them, in case I need to get my money back. Thanks!
  12. B

    400WHP with Procharger?

    The shop dyno tuned it with all the parts on it. The motor is pretty much brand new, so the performance hasn't really slacked. The shop that did the tuning said that the 5.0's don't really get that much of a gain with the Procharger and that 350 to the wheels was pretty good. I don't think...
  13. B

    400WHP with Procharger?

    I have tried searching for similar setups but haven't found anything here. I am helping my friend change his head gasket on his '95 Cobra. He has a Procharger P1SC intercooled with the 14lb pulley. He also has bassani x-pipe, with a borla mufflers and 3 inch pipes, BBK headers (shorties)...
Top Bottom
Back
Forums
Menu