Search results

  1. M

    Airbag code 12 blinking

    I replaced the fuse and as soon as I started the car it blew again. Thanks for the info on the diagnostic monitor.
  2. M

    Airbag code 12 blinking

    It did trigger a code 12. Where is the best place to start looking for the problem or is there a "typical" problem that triggers a code 12? Thanks.
  3. M

    Airbag code 12 blinking

    I have my power seat unplugged purposely. Shortly after doing that, my airbag fuse blew and I have a code 12. Is it possible that is the problem?
  4. M

    Airbag connector under dash

    I know where the module is located on the passenger side for clearing codes. Isn't there also a connector under the dash on the drivers side. I am trying to fix a code 12 (low battery feed), the fuse keeps blowing. I want to look and see if the connectors need to be cleaned. Thanks in advance!
  5. M

    BATTERY / ALTERNATOR PROBLEM?

    The battery in my car was in it when I bought it about 8 months ago. I have the receipt from when the battery was bought and it's only 10 months old. Granted, it's a Walmart battery, but it's not very old. The problem is, the fluid level in the battery is constantly depleting itself and if I...
  6. M

    Bullitt Lugs

    Mustang5L5, sir you are the man. I greatly appreciate your time and effort, that's exactly the info I needed!
  7. M

    Bullitt Lugs

    I just bought a set of '02 factory Bullitt rims for my '95 GT. The lugs that mounted my Saleen replica's do not fit correctly with the Bullitts. Can someone pull a lug off of your factory Bullitts and post a pic of it. I really need to see a full side shot of one. Thanks in advance!! Bobby
  8. M

    o2 Sensors

    check out http://oxygensensors.com. I got mine there several months ago. No hassle and if I remember correctly, free shipping.
  9. M

    Anybody have 19lbers they want to get rid of?

    check your pm
  10. M

    Anyone else have a large draw to battery?

    Just went through the same thing. I've had my car about 7 months and when I got it, it had a fairly new battery in it. Keeping that in mind I went through everything you're talking about trying to find it. This past weekend I decided to pop the caps on the less than one year old battery and...
  11. M

    Are Pro-M MAF good?

    I picked mine up last December from these guys http://www.jdsperformance.com. The price has gone up since I got mine ($160) but it's still a good price, especially since that includes shipping. They were pretty slow on shipping but they respond to all emails you send. I think it actually took...
  12. M

    MAF Torx Screw

    Sears has them for about $10.
  13. M

    Intake Swap

    I am getting ready to replace my stock intake with a Cobra upper and lower. Does the Cobra upper and lower use the same hardware as the stock or will I need to find a bolt kit of some kind? Thanks in advance! Bobby
  14. M

    Powerdyne Blowers

    I too, have a 6lb Powerdyne. It came with my car when I bought it about 7 months ago and the owner of the car had just had it rebuilt by Powerdyne. He paid $700 to have it rebuilt. I just had to reinstall the head unit after I bought the car. So far I've not had any problems with it. I know...
  15. M

    My Intake Ignorance

    This is my thinking as well. If this is truly the case, can I still use the Fox intake and somehow block off this port?
  16. M

    My Intake Ignorance

    I am looking for a gt-40 lower intake for my '95 GT. I already have in hand a Cobra upper. My ignorance concerning this is the difference I see between some intakes. Some have a hole in the top at dead center and some do not. What is this for and most importantly which is correct for my '95...
  17. M

    Factory stereo amp location

    As always, you guys rock! What we would do with those who have "been there, done that"?
  18. M

    Factory stereo amp location

    Can anyone tell me where the factory stereo amp is located. I do not have the MACH 460 system, just the so called premium system: am/fm/cassette with seperate cd player. I am replacing the head unit and want to bypass the factory amp. Thanks
  19. M

    Wheel Stud Replacement Procedure??

    :nice: Well I removed that bad stud with no problems at all and I didn't have to remove the caliper. I just rotated the assembly until the stud lined up with an open space in the dust shield and tapped it out. I put the new one in through the same space and used several washers and a lug nut...
  20. M

    Wheel Stud Replacement Procedure??

    I need to replace a cross threaded wheel stud and was wondering what the procedure is.:shrug: Will I need to remove the entire hub or can it be manuvered out with the hub in place? Thanks in advance for your help.
Top Bottom
Back
Forums
Menu