Search results

I am having trouble with the wiring for the viper 211hv system. I am installing the system in a 1988 ford mustang with factory power locks. I have done the following wiring so far. I have connected the pink/yellow and pink/lt green wires coming from the passenger side to the H1/6 and H1/17...

Does anyone know if someone repops these? It looks almost identical to the 82-86 window switch bezel. The fact the the first two symbols in the part number are E2 ('82 part number) makes me think they could be the same part. 87-89 Bezel (mine is cracked at the screw countersink) 82-86...

After finishing my head and intake swap I am having starting issues. I just wanted to say that I first followed jrichker's cranks no start checklist verbatim. I also found SBF TEch.com's checklist about testing the ignition coil. Now here is the weird part, when I probe ignition coil's (-)...

I have a question about the vacuum line running to the charcoal canister. When I was at the salvage yard getting a thermostat housing off of a Mark VII, I noticed that the Mark VII had a one way vacuum valve (VCV) attached to the hose running to the charcoal canister. Everything from my car...

Which one of these headers pictured are the right headers? They are both the same model number but the pictures are different on the JEGS and FordRacing websites. Is it a mistake or did ford change the design again? JEGS: Ford Racing:

What does this wire do? The passenger and driver sides have lumbar but that wire plugs into the middle of the underside of the seat. The wire hanging from the seat appears to go to the lumbar region. Did the driver's side have another lumbar connection? This wire was cut and I don't know...

I just install a new ignition because the previous owner of the car installed some kind of universal ignition (autoparts store) pos. Well, my problem is the old POS ignition did not have a connection for the Key Warning Switch or key in ignition chime warning and the new one does but I can not...

I bought a 1988 5.0 convertible. She is completely virgin right down to the air snorkel. Has about 200k on her but only 70k on a rebuilt short block. There is not a bit of rust on the car. I did a compression and leakdown test before I bought her and everything is was within tolerances. I bought...

I am trying to track down the root of the sound that my engine is making. It is a 88 GT. The sound only happens with when under load and increases with rpm and appears to be coming from the #4 cylinder/ throttle body area. Here is the video of the video. YouTube - 5.0 engine noise