Search results

:mad: I have a 4R70W in my 96GT, I'm having a small problem with a leak i can't locate . The rear tail shaft housing is dry, the dip stick is dry, the pressure and return lines are dry. It only happens ever so often around the pan and soaks the bolts.I've replaced the pan and gasket with OEM...

I put in a 98 gt motor into my 96 gt, The problem I'm having is the serpentine belt on the upper idler pulley looks like it wants to slide foward while running,its rubbing the protective stop on the lower idler pully,Well after looking at belt line on the accessories the A/C seems to be about...

i just installed my new motor into my 96, cranked fine after install then turned it off to get a froathy beverage got into it and cranked her back up well she was bucking bad started to check fuel injectors pulled the harness off each one well got to #6 no change ,check resistance in the...

I was wondering i just purchased a forged lightning short block from a friend for 200 bucks, i have a 96 gt ,and a set of 2000 heads will the heads go on the block and what other problems will i run into .I'm going to use the 4.6 intake and all the other items on the 4.6. I'm just curious to...

I just bought a pi intake kit ,i'm wondering in some of the forums,people have said to use rtv on some " cooling holes" because the gasket will not line up ,am i correct on this ,because next weekend i'm putting it on,if anyone has some pictures of what i'm supposed to rtv it would be very nice...

Well gentlemen ,I think my 96gt motor is telling me its time to replace it ,its been bucking slightly for about 5 months now, but i could not locate the problem,i changed everthing electrical, well the other day it started doing it again only harder ,i got home from work and my wife says she...

I've got a 96 gt i want to put a 302 in it ,i just bought a 95 k member with control arms and springs,my question is to make this work will a 95 gt wiring harness be a direct plug in or will i need to make it work,and is there anything else that might throw a wrench in the process.:SNSign:

I have a 96 gt with a 4.6,my question is are the k members the same for a 94 -95 as a 96 ,becuase i would like to convert my stang to a 302 if its possible any information would be helpfull.:SNSign:

I have a few questions ,are the k-members the same on my 96 gt as the 94-95 gt's because my 4.6 is tired it has over 170,000 miles,my question is because i'm thinking of going carbed ,i just got a killer deal on a 302 with alot of mods and 2 c4's ,just wondering what is involved,i'm not worried...

A few things first ,the car started this bump/shuttering problem awhile back its a hit and miss thing, it's a 96 gt,so i replaced the plugs w/ autolite 742 ,new 9mm frpp,2 new coil packs,new fuel filter,i have a 2003 throttle body & plenum,mac cai,march underdrive pullies,new tps,idle air...

Well i think i might need to replace or rebuild my 96,it is cheaper for me to buy a whole motor out of an truck or grand marques than to rebuild the one i have, i was wondering what long blocks i could use ,what is the compatability for the 4.6,what other model 4.6 donor cars can i use and what...

Anyone know were i can buy a used OTC 7928 valve spring compressor tool,mine need replacing.:SNSign:

Hello everyone i was wondering if anybody could tell me the reason why my 4.6 is smoking ,First let me tell you what I've done, It's a 1996 GT ,Mac CAI,2003 port and polished plenum and throttle body(half-shafted),and the PCV inline filter(homemade but air tight),underdrive pullyies,3:55...

About two weeks ago my stang started to make this squeeling noise under the hood,i thought it was the serpentine belt so i went and put a new on,still was doing this noise so ,i replaced both idler pullies ,still did it ,so while it was squeeling i turned one the air conditioner and it was still...

I've got a 96 gt auto. i'm thinking of swapping to a 5.0,i was wondering since the 94-95 had the 5.0 will a 96 support the engine aswell,would a computer change be necessary and will my aode work.:bang:

I have a 96 gt and i was wondering is there anyway possible to change the drivers power track to a manual seat track system without alot of mod's?:shrug: