Search results

  1. S

    Att. All Afr Head owners, afr messed up

    I took lots of pics and measurements so they cant try to screw me at all. I also ordered the upgraded valves and springs when I bought the heads so I tested the spring pressure and I wrote down the number off the valves so I what lam getting back. So we will see what happens. And I agree there...
  2. S

    Att. All Afr Head owners, afr messed up

    Yes I know for a fact that I have the right valve train and correct pushrod lengths. If it was worn guides I would see scratches in the cylinder walls, bearings and or find metal in the pan which I found none of these. I also found that they measure up to the same size guides as a bb chevy. I...
  3. S

    Att. All Afr Head owners, afr messed up

    Correct ones Oversized Wrong ones
  4. S

    Att. All Afr Head owners, afr messed up

    I own a pair of Afr 165s and I have had them for about 1 year with 10,000 miles on them with I thought to be no problems. I tore my engine apart today and found that 3 of my valve seals were broken and I thought that mybe to much cam or somthing on my behalf. Well I tore the head off and took...
  5. S

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    I have owns and I have flowed benched them my self next to a set of AFR 165s. I ordered a set of Pro comp 190s and whenI got them I was very disappointed with the quality. The heads them self when you get them need cleaning up in the ports, there are alot of uneven spots in the runners and...
  6. S

    Sound shuts off intermittently. PLease Help

    I have a 92 mustang with the stock EQ and stock amp with a Alpine head unit. The sound shuts off if you rev the car above 2000rpm or if you use anything electronic in the car. If you hit the break it shuts the sound off, use the head llights, mirrors, anything. The radio will not work with the...
  7. S

    Nitrous plate???

    Iam wanting to add nitrous to my car, and Iam having trouble finding a gt-40 nitrous plate. I have a nitirous bottle, lines and solenoids already I just need a plate. Does anyone know were I can buy one?
  8. S

    how to lower compression for turbo (shims?)

    I need to drop my 306's compression to around 8.8 or lower. Right now, I have 10:1 with AFR 165 heads (58cc), .032" head gasket, and the piston comes up .004" out of the bore. I do not want to change the short block. With that said, is there some way of dropping the compression through...
  9. S

    Custom torque Boxes. What do you think?

    NO I have no measurments at all, I did nothing on this project of my car, I had a local badass shop do it. But I guess all he did was measure were the boxes were orignally and then he tore the old ones out in one piece and made a repilca of them and welded them right back in place and then fully...
  10. S

    Custom torque Boxes. What do you think?

    Yes it does sit level, it use to sag in the rear but know it sits perfectly level.
  11. S

    Custom torque Boxes. What do you think?

    Well it didnt cost to much, I paided 600 for it all and it hooks sweet. It was well worth the investment. He also did a little extra to the upper control arm boxes, nothing a little 1/8 steel cant fix.
  12. S

    Custom torque Boxes. What do you think?

    I have a 92 mustang that I ripped the rear torque boxes out of, they were so bad that I almost had to cut the car in half. After talking to many poeple they all told me that It would never hook up right ever again. I bought my car to a guy here in my home town and all he does is suspension. He...
  13. S

    Man I messed up!!! Can it be fixed?

    Have any of you over tried Wild rides reinforcement torque Box plates? Iam bringing it to a frame shop in the morning to see what they can do. I hope it goes back to the way it was. I was launching on street tires with all stock suspension and running 1.95, 60 foots.
  14. S

    Man I messed up!!! Can it be fixed?

    Well I was out racing my car and realized after a couple of launches, it felt like the ass end of the car was washed out or moving or something. Then I realized that when I get in the throttle even in third gear the driver side tire starts spinning like a big dog. I go home but it on Jacks...
  15. S

    Lower Torque box help!!!

    do I need to get an alignment before or after I do weld them?
  16. S

    Lower Torque box help!!!

    I noticed that my lower torque boxes are torn. The pass side of the car has tears in it but still connnected but real close to torn all the way throughright by the nut for the a-arm.The driver side one has torn all theway through.The tear on the driver side is right wear the nut is for the lower...
  17. S

    This makes no sense at all. PLease help

    I know were to start but the setting that I Have it at makes it run deccent but i know thier not right. When the fp is at 45 it hardly starts and also it runs like ****.Timing at 10 degrees it also runs like ****? Iam confused. Also.. My car isn't any faster than it was with the stock heads...
  18. S

    This makes no sense at all. PLease help

    Ok first off this is what I got 1992 mutang gt 306 Afr 165 heads Tubular gt-40 intake Ander son for n-21 cam 30ld fuel injectors 75mm throttle body and egr spacer 75mm mass air calibrated for 30 lb fuel injectors 190 in tank fuel pump anderson for power pipe Ok heres whats going...
  19. S

    Need help with fuel problem

    only codes in the computer are 94 and 44. But I cant figure out how to fix them, or even whats exactly wrong
  20. S

    Need help with fuel problem

    Well I still l havent figured it out yet. I need someone to help me that is running a 5.0 with heads and a cam with around 512. lift and 108 lobe seperation. Should the car be hard to start? Also what should I run for fuel pressure and timming, Iam running 10.1 compression, also I seems thats...
Top Bottom
Back
Forums
Menu