1/8 mile question

Discussion in 'Fox 5.0 Mustang Tech' started by RalphWT, Dec 15, 2003.


  1. RalphWT

    RalphWT New Member

    Joined:
    Jul 8, 2003
    Messages:
    44
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Fort Worth, Texas
    I went to the track today I only got to run three times, on my last run I had a great start, but I missed 2nd & 3rd :bang: the 60' was 2.148 10.186@ 66.31, what do you think my time would have been :shrug: , I normally run a 9.50 @ 75, with a 2.3 60'.
    #1
  2. mike keirstead

    mike keirstead New Member

    Joined:
    Aug 6, 2003
    Messages:
    1,125
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    ROLLING A JOINT
    9.5@75 would be around [email protected] or so.
    #2
  3. mike keirstead

    mike keirstead New Member

    Joined:
    Aug 6, 2003
    Messages:
    1,125
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    ROLLING A JOINT
    Just take your 1/8 et and multiply it by 1.563. This equals a very close estimate to what you would get in the 1/4 and I always use 1/8 mph multiplied by 1.26 to get my 1/4. It is a close estimate. These numbers work for me.
    1/8et X 1.563= 1/4 et
    1/8mph X 1.26 = 1/4 mph
    These are very close to the real thing.
    #3
  4. HKSpoweredS13

    HKSpoweredS13 New Member

    Joined:
    Dec 12, 2003
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    well i ran a 14.59@95 and my 1/8 was 9.43@73 with 2.3 60ft
    #4
  5. mike keirstead

    mike keirstead New Member

    Joined:
    Aug 6, 2003
    Messages:
    1,125
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    ROLLING A JOINT
    Like I said it is an estimate. You were .07 quicker in the 1/8th which equals a full tenth on the top end. Its pretty damn close. SORRY
    #5

Share This Page