New* fiberglass full front fenders 2.25" and rear flares 2" - Maier Racing.
Front flares are 2.25" and rears are 2" which will match the front width.
Will freight ship at cost for ~$200 via Pilot Freight. Located in Richmond, VA (open to local pickup)
*Flares are new, but I did begin to fit one of the front fenders. All three other flares are untouched.
The front fenders are intentionally manufactured with approximately 1/4" - 1/2" extra length that must be sanded down to fit your exact vehicle. Every classic mustang has slightly different tolerances/fitments. I began sanding a corner (pictured) and took off about 1/8" so there is more to go to fit to your vehicle. To properly install fiberglass, you will need some fiberglass filler to fix imperfections, like filling low spots, etc.
67-68 Front Fenders - Maier Racing
www.maierracing.com
67-68 2" Rear Flares - Maier Racing
www.maierracing.com
Front flares are 2.25" and rears are 2" which will match the front width.
Will freight ship at cost for ~$200 via Pilot Freight. Located in Richmond, VA (open to local pickup)
*Flares are new, but I did begin to fit one of the front fenders. All three other flares are untouched.
The front fenders are intentionally manufactured with approximately 1/4" - 1/2" extra length that must be sanded down to fit your exact vehicle. Every classic mustang has slightly different tolerances/fitments. I began sanding a corner (pictured) and took off about 1/8" so there is more to go to fit to your vehicle. To properly install fiberglass, you will need some fiberglass filler to fix imperfections, like filling low spots, etc.
Attachments
-
IMG_4626.jpeg1.1 MB · Views: 27
-
IMG_4627.jpeg1.4 MB · Views: 26
-
IMG_4628.jpeg821.4 KB · Views: 29
-
IMG_4629.jpeg1,021.6 KB · Views: 25
-
IMG_4630.jpeg1.1 MB · Views: 26
-
IMG_4631.jpeg1.2 MB · Views: 27
-
IMG_4632.jpeg1.1 MB · Views: 27
-
IMG_4633.jpeg1.2 MB · Views: 30
-
IMG_4634.jpeg1 MB · Views: 26
-
IMG_4635.jpeg1.5 MB · Views: 29
-
IMG_4636.jpeg1.5 MB · Views: 26
-
IMG_4637.jpeg1.4 MB · Views: 27