- Feb 10, 2013
- 4
- 0
- 1
So I finally got some new wheels for my car and I knew i wanted to go with a wider tire, I did get them on sale but that's not the point here anyway.
I went with 19x10 because I have a buddy who has a 19x10 squared setup on his car, but it was a 2013, not sure how much different that is, anyway....
So i test fit the wheels themselves before i got the tires and there's plenty of room for the 275/40/19 tires but the bolt from the sway bar end link concerns me in the front.
It looks like there's a lot of excess on the bolt that could maybe just be trimmed off. The sway bar end links themselves seem fine, I'm just concerned w/ the bolts being a bit long and potentially rubbing the tire when turning tightly or something.
Would it be ok to cut the extra bit off? it's not touching and it's about half an inch away from the wheel/tire.
Mostly wonder if anyone else has done this, I'm sure it's fine to cut the ends off, but I'm also just being cautious.
the offset on the wheels is 40 btw, if anyone is wondering.
I went with 19x10 because I have a buddy who has a 19x10 squared setup on his car, but it was a 2013, not sure how much different that is, anyway....
So i test fit the wheels themselves before i got the tires and there's plenty of room for the 275/40/19 tires but the bolt from the sway bar end link concerns me in the front.
It looks like there's a lot of excess on the bolt that could maybe just be trimmed off. The sway bar end links themselves seem fine, I'm just concerned w/ the bolts being a bit long and potentially rubbing the tire when turning tightly or something.
Would it be ok to cut the extra bit off? it's not touching and it's about half an inch away from the wheel/tire.
Mostly wonder if anyone else has done this, I'm sure it's fine to cut the ends off, but I'm also just being cautious.
the offset on the wheels is 40 btw, if anyone is wondering.